• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.99-104
• /
• 2011

Purpose: Total elbow arthroplasty (TEA) is still in its infancy as compared with other forms of arthroplasty. TEA designs have evolved with experience, but comparatively little long-term outcome data is available. This article provides an overview of the current states of linked, unlinked, and convertible total elbow arthroplasty. Material and Method: The designs of total elbow prostheses can be subdivided into three categories: unlinked, linked, and convertible. This article provides an overview of the current states of linked, unlinked, and convertible total elbow arthroplasty. Results and Conclusion: By proper patient selection and by utilizing implant design advances, improvements in cementation techniques, a meticulous surgical technique, and appropriate postoperative rehabilitation, total elbow arthroplasty can provide a high level of patient satisfaction and pain relief.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.527-533
• /
• 2020

Purpose: This study compared the effects of a buprenorphine transdermal patch (BTDP) on the chest and knee for pain control after total knee arthroplasty (TKA). Materials and Methods: A retrospective case-control study was conducted from August 2018 to August 2019 on 231 patients who underwent TKA. Two hundred cases were selected considering age, sex, and body mass index. Before and after applying the BTDP, the Numeric Rating Scale (NRS), adverse effects and compliance were measured. All measurements in the chest application group (group A=100) and knee application group (group B=100) were compared. Results: NRS was similar in rest between the groups treated with BTDP, but at two days and three days afternoon, five, six, and seven days postoperatively in group B, the NRS was significantly lower than that of group A. The adverse effects of the central nervous system and gastrointestinal system after applying BTDP were significantly lower in group B than in group A. No significant differences in adverse effects of the cardiovascular system and skin were observed between the two groups. Regarding the maintenance of BTDP, group B was significantly higher than group A. Conclusion: The direct application of BTDP after TKA to painful knee joints showed excellent results in early postoperative pain control and can be a useful method for increasing patient compliance by reducing the frequency of adverse effects.

• Composites Research
• /
• v.28 no.3
• /
• pp.89-93
• /
• 2015

This study analyzes the transplanting parts used as the graft of artificial knee joint. The low elastic titanium alloy is applied to clear up the stress shield effect. The simulation analysis is carried about the stress distribution of the transplanting parts. The correlation with frame is inferred and investigated through the equivalent stress distribution of titanium alloy due to elastic modulus. The stress of the transplanting parts decreases as the elastic modulus decreases at the first time. It decreases greatly near the stress of 46 GPa and increases again. Because the stress happened at the transplanting parts decreases, more stress is applied on the frame. This phenomenon is the stress shield effect. The result of this study can be thought to be necessary to develop the safe design of composite material.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.96-104
• /
• 2007

Purpose: The authors investigated whether 35 flexible nail-rotating hinge composite reconstructions around knee joint minimize junctional osteolysis of host bone. Material and Method: The reconstructive technique was as follows: 1) en bloc tumor resection, 2) filling of the host bone marrow cavity with multiple Ender nails, 3) assembling the Ender nails and an Endo-Link type total knee component with wire and bone cement. Result: Mean follow-up was 53 months (ranged 30~79). At final follow-up, 29 patients retained a mobile joint. Resection of more than 40% of bone showed a positive relationship with junctional hypertrophy (p=0.028). Eight patients showed nail breakage and eight prostheses were removed due to early or late infection. The cumulative prosthetic survival rate was 33% at 6 year. Average functional score according to the MSTS criteria was 26.8. Conclusion: Mid-term evaluations showed that results were fair. The revision process was straightforward. Junctional hypertrophy observed appears to give some clues as to how to minimize osteolysis at the prosthesis-host junction after modular prosthesis fixation.

• Journal of Life Science
• /
• v.18 no.11
• /
• pp.1532-1537
• /
• 2008

The purpose of this study was to investigate the effect of different arthroplasty designs on knee kinematic and lower limb muscular activation for up-stair and down-stair movement. 3-D video analysis of whole body and joint kinematics and EMG analysis of quadriceps and hamstrings were conducted. One-way ANOVAs were used for statistical analyses (p=0.05). The single-radius group exhibited more arthroplasty limb quadriceps EMG and hamstring coactivation EMG than the multi-radius group. Single-radius demonstrated more abduction angular displacement and reached peak abduction earlier than the multi-radius arthroplasty limb. The single- radius the percent body fat showed similar values in the Elderly, Single and Multi-radius group among the periods, however Control group was Lowered among the periods. Single-radius group limb also increased the quadriceps muscle activation level to produce more knee extension moment to compensate for the short quadriceps moment arm. Resting metabolic rate was significantly increased in control group in the period of LI. Energy expenditure was extremely increased in all groups except control group among the periods. We can say this is the exercise effects.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2004.11a
• /
• pp.129-135
• /
• 2004

만약 Glenoid side를 해부학적으로 정확하게 치환하고, 상완골측의 prosthesis를 삽입할 때 실제 골두의 크기와 같은 prosthetic head를 쓰고, humeral stem의 위치 및 높이를 정확하게 맞추어 삽입하여, humeral head component의 center와 glenoid component의 center가 일치되고 lateral glenohumeral offset이 정상에 가깝게 수술을 시행하면 인공 치환물로 대치된 glenohumeral joint가 정상에 가장 가까운 kinematics를 가질 수 있다 (당연한 얘기지만 이렇게 수술하려면 많은 경험이 필요). 따라서 Glenohumeral joint의 인공 관절 치환술은 항상 technique-dependant 수술이며, 아무리 좋은 치환물도 훌륭한 수술 기법보다 더 중요할 수는 없다.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.1
• /
• pp.112-117
• /
• 2006

Deep vein thrombosis and pulmonary embolism are serious fatal complication after orthopedic surgery. Most of them occur after large operation such as total knee/hip arthroplasty. Some reports about deep vein thrombosis after simple arthroscopic procedure were on the Western literatures, but there was no report on the Korean literature. So we report two cases of pulmonary embolism after knee arthroscopic procedures.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.189-194
• /
• 2021

The purpose of this study was to investigate the effect of reducing noise and streaking artefacts by applying the Boost3D algorithm in the case of noise and streaking artifacts generated during computed tomography of the shoulder joint. A phantom study using a thoracic phantom including shoulder joint and clinical evaluation were conducted through shoulder joint images of 35 patients who underwent computed tomography of the shoulder joint from September 2020 to October 2020. The evaluation was divided into groups before and after the application of the Boost3D algorithm, and the noise values, signal to noise ratio, and mean to standard deviation ratio values were analyzed. Both noise values and mean to standard deviation ratio values analyzed in phantom image evaluation and clinical image evaluation were statistically significantly lower in the group after Boost3D was applied (p<0.05). Through this study, it was found that noise and streak artifacts were reduced through the application of Boost3D, and the mean to standard deviation ratio was high, which can be judged as an excellent image. If the Boost3D algorithm is used for computed tomography of the shoulder joint, it is thought that excellent images can be obtained with reduced noise and streaking artifacts that may occur in the shoulder joint area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.582-585
• /
• 2015

In the aging society, TKRA is steadily increased because of joint diseases. Artificial joint used in TKRA generates metal artifacts in the MRI. Metal artifact may affect diagnosis. In study, We are going to minimize the effect of metal artifact to improve the value of diagnosis by changing the sequence and the type of artificial joint(Co-Cr, Ni-Ti). 1.5T AVANTO, plastic containers and each of the artificial joint (Normal, Co-Cr, NiTi) were used. After the artificial joints fixed in a paper cup was inserted in a plastic container of cylindrical, Signal intensity was measured. To obtain strong and uniform signal intensity, the plastic container was filled with water. We changed Sequences(T1 TSE, T2 TSE, PD TSE) and obtained an Axial image. After excepting the maximum and minimum values, We calculated the average of SNR, CNR and PSNR. Consequently, The SNR, CNR value of PD TSE are measured higher than these of T1 TSE, T2 TSE and The PSNR of Co-Cr is higher than this of Ni-Ti. The SNR of Co-Cr is similar to the SNR of normal comparing this of Ni-Ti. As a result, Using sequence of PD Tse and Co-Cr alloy is considered to be useful.

• Journal of Biomedical Engineering Research
• /
• v.22 no.6
• /
• pp.543-550
• /
• 2001

In this study, ground reaction force(GRF) and energy consumption of fixed. single-axis and multi-axis Prosthetic ankle assemblies were investigated to show the biomechanical evaluation for trans-tibial amputees. In the experiments. two male and two female trans-tibial amputees were tested with fixed, sin91e-axis and multi-axis Prosthetic ankle assembly. A three-dimensional gait analysis was carried out to derive the ratio of GRF to weight as the percentage of total stance Phase for nine Points Energy consumption of each Prosthetic ankle assembly was measured while subjects walked at 2km/h. 3km/h and the most comfortable walking speed on the treadmill The results showed that multi-axis ankle was superior to the other two ankle assemblies for the characteristic of forwarding and breaking forces. Fixed ankle was relatively superior to the other two ankle assemblies for gait balancing and movement of the center fur mass Compared to the other ankle assembly. sing1e-axis type showed lower energy consumption over 2.3km/h walking speed .