Journal of The Korean Society of Grassland and Forage Science
/
v.23
no.2
/
pp.121-128
/
2003
This study was conducted to investigate the effect of tall type mixtures and tall+short type mixtures on dry matter yield, botanical composition and quality. The experimental design includes two mixture types: Tall type mixtures(TM); orchardgrass(Potomac) 40+tall fescue(Fawn) 20+Festulolium braunii (Paulita) 10+perennial ryegrass(Reveille) 10+timothy(Climax) 10+red clover(Kenland) 5+alfalfa(Vernal) 5%) and tall+short type mixtures(TSM); orchardgrass(Potomac) 40+tall fescue(Fawn) 20+Kentucky bluegrass(Newport, turf type) 10+redtop(Barricuda, turf type) 10+perennial ryegrass(Palmer III, turf type) 10+red fescue(Flyer II, turf type) 5+white clover(Regal) 5%. The dry matter(DM) yield was higher obtained in TSM than that of TM, but there was no significant difference between TM and TSM. In the chemical composition, there was no significant difference between TM and TSM, but the content of cellulose, lignin were higher in TM than those in TSM(p<0.05). Also, the content of acid detergent fiber which affected dry matter digestibility was higher in TM than that of TSM. The crude protein dry matter yield was not observed significant difference between TM and TSM, but digestible dry matter(DDM) yield was higher in TSM than that of TM. In botanical composition, tall fescue, alfalfa and orchardgrass were highly maintained in TM but white clover, tall fescue and orchardgrass were highly, and redtop, red fescue were continuously maintained in TSM. In this experiment, DM yields and quality of two mixture types were no difference. However, the tall+short type mixtures(TSM) were more effective in enhancing the dry matter digestibility and DDM yield, and in maintaining the various botanical composition.
Journal of The Korean Society of Grassland and Forage Science
/
v.26
no.4
/
pp.249-256
/
2006
The object of this experiment was to suggest the optimum autumn sown small forage crops as next forage crops harvested maize in Daejeon area. The field trials was conducted from 2002 to 2004 at Chungnam National University in order to evaluate the dry matter yield and qualities of the autumn sown small forage crops. The experiment was consisted of split plots (main plot : forage crops as rye, barley and wheat, and sub plot 4 harvest stages as boot, heading, milk and dough) design with three replications. The average DM yield for 2 years of rye was higher than that of other forage crops (p<0.01). As stages proceed, the DM yield tended to increase in all forage crops (p<0.01). In chemical composition, they had a difference on forage crops and stages. The crude protein (CP) was higher in barley (p<0.01), but fibrous contents such as NDF, ADF, cellulose and lignin were lower in wheat than in the other forage crops (p<0.01). In Daejeon area, although barley and wheat at milk and dough stages were observed with maximum yield and high quality as autumn sown forage crops, due to late harvesting periods, it is difficult to utilize them as previous forage crops seeded in maize. Based on the result mentioned above, it is concluded that rye harvested at boot to heading stages is the most suitable fur autumn sown small forage crops in Daejeon area. Meanwhile, in order to have the option of nutritional value in wheat and barley, they need to be supplied early maturing and high-yield variety of wheat and barley.
Journal of The Korean Society of Grassland and Forage Science
/
v.27
no.3
/
pp.173-182
/
2007
The purpose of this study was to compared the early growth pattern, stem, leaf and root weight, DM yield, flowering characteristics and preference for selection of turf type grasses and wild flower species in mixtures combination for wildflower pasture. The experimental design included five species of turf grasses and 11 species of wildflower : turf type grass species{Kentucky bluegrass(Midnight), tall fescue(Millennium), perennial ryegrass(Palmer III), redtop(Barricuda) and creeping bentgrass(Crenshaw)}, wildflower species {Chrysanthemum leucanthemum L. Coreopsis lanceolata L., Rudbeckia bicolor Nutt.., Dianthus chinensis L., Chrysanthemum lindicum L., Lotus corniculatus var. Japonicus Regel, Veronica linariaefolia Pallas, Aster koraiensis Nakai., Chrysanthemum zanadskii var. latilobum (Maxim.) Kitamura, Lythrum anceps Makino and Iris pallassi var. chinensis Lodd}. The field trials were carried out on the experimental pasture plots of Chungnam National University from January 2005 to December 2006. The appropriate species of turf grass which have a mixture possibility with wildflower are thought to be Kentucky bluegrass. Compared with Kentucky bluegrass, on the other hand, species such as Chrysanthemum leucanthemum L., Lotus corniculatus var. Japonicus Regel, Chrysanthemum zanadskii var. latilobum Maxim.) Kitamura and Lythrum anceps Makino have shown advantageous aspects of fast early growth pattern and highly weights of stem, leaf and root. Futhermore, these wild flowers were in harmony and no overlap on flower color, flowering periods and flowering longevity, and highly preference by Korean native goats. For the establishment of wildflower pasture in Korea, therefore, it is important to select the appropriate species of turf glasses, which have a weak competition against wild flowers, and then to make mixture combination of those turf glasses with the various wild flowers which have a strong competition against turf glasses but have a different anthesis characteristics among themselves.
Journal of The Korean Association of Information Education
/
v.24
no.4
/
pp.337-367
/
2020
In this study, the standard model of next-generation software(SW) education was developed to expand SW education for fostering future talents and to prepare a consistent SW education application system for elementary, middle and high schools in the next revised curriculum. To this end, based on the study of the standard model for elementary and secondary SW education conducted in 2017~2018 academics, basic research and analysis on domestic and foreign SW education, public forums of related organizations and experts, global SW education workshops, and public hearings are held. Through this process, a consistent application system for SW education in elementary, middle, and high schools was established, and the next generation SW education standard curriculum model that can be connected to higher education and industry was developed.
Multi-Vertical Loop Arch Wire(MVLAW) is a kind of appliance for uprighting the mesially inclined posterior teeth axes simultaneously. In this study MVLAW was classified as 3 types by modifing the vertical loop design and named type A, B and C. Each MVLAW was fabricated from .017'x.025' TMA wire and preactivated at the distal end of the open vertical loop with 10 degree tip-back bend(type B has an electric welding stop at the distal end of each loop and type C has no electric welding stop). Type A MVLAW was preactivated at the apex of each open vertical loop with 10 degree tip-back bend(the electric welding stop of type A is positionod at the mesial side of each loop). The aim of the present study was to identify when and which MVLAW is more effective to correct the buccal segment axes simultaneously. The Photoelastic overview of the upper and lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows : 1. Higher level compression can be seen clearly at the distal curvature of the lower 1st and 2nd molar when A type MVLAW was applied without short class m elastic, but mild compression cannot be seen at the distal curvature of lower anterior teeth using the class m elastic. 2. Higher concentration was presented at the mesial curvature from the lower 1st premolar to the 2nd molar than the anterior teeth when B type MVLAW without short class III elastic was applied, but using the short class III elastic, higher concentration of compression was presented in the anterior teeth area. 3. Areas of higher compression and tension were not observed at the mesial and distal curvature of the entire 1ower teeth except lower central and lateral incisors in C type MVLAW without short class III elastic, but using the short class III elastic, higher concentration was seen at the mesial curvature of the lower 1st premolar and 1ower anterior teeth.
Proprioception defined it as the ability to detect, the spatial position or movement of joints using balance, power of the muscle, agility in the internal parts of the body. In existing study for improvement of proprioception, reaching task training provided a feedback; the assessment was not provided a feedback. But, this has problem that it can not guide a proprioception from situation with visual feedback. Virtual reality technique can solve the problem of way providing feedback during training. In this study, we developed proprioception training program using virtual reality and pilot study is performed. VR task were composed three modes. In mode 1, real-time movement of the body was provided using visual feedback. In mode 2, body position was provided using visual feedback when participant have specific response. And in mode 3, body position was not provided. VR task is performed five sessions at each mode and one session performed one by one a three target. In the result of this study, the moving time toward the target from mode 3 was smaller than the moving time toward the target from mode 1 (p= 0.001). The correlation was statistically significant between mode 2 and mode 3 while be offering visual feedback position of mode 2 1session. But, the correlation was not statistically significant between mode 2 and mode 3 after be offered visual feedback position of mode2 1session (p = 0.012). Training environment of mode 1 shows which training used visual feedback than proprioception. Mode2 can execute training of proprioception because first session acquires visual feedback by proprioception. The next study will be verification of the system for training or assessment by clinical experiment.
Purpose: The purpose of this study was to investigate the stress distribution in mandibular implant-supported overdentures and tooth-supported overdentures with telescopic crowns. Materials and methods: The assumption of this study was that there were 2, 3, 4 natural teeth and implants which are located in the second premolar and canine regions in various distributed conditions. The mandible, teeth (or implants and abutments), and connectors are modeled, and analyzed with the commercial software, ANSYS Version 10.1. Stress distribution was evaluated under 150 N vertical load bilaterally on 3 experimental conditions - between canine areas, canine and $2^{nd}$ premolars, 10 mm posterior to $2^{nd}$ premolars. Results: Overall, the case of the implant group showed more stress than the case of the teeth group in stress distribution to bone. In stress distribution to superstructures of tooth and implants, there was no significant difference between TH group and IM group and the highest stress appeared in TH-IV and IM-IV. The stress caused from bar was much higher than those of implant and tooth. TH group showed less stress than IM group in stress distribution to abutment teeth and implant. Conclusion: The results shows that it is crucial to make sure that distance between impact loading point and abutment tooth does not get too far apart, and if it does, it is at best to set abutment tooth on premolar tooth region. It will be necessary to conduct more experiments on effects on implants, natural teeth and bone, in order to apply these results to a clinical treatment.
Purpose: The purpose of this study was to investigate the effects of a mouthguard on stress distribution under mandibular impact. Materials and methods: The FEM model of head consisted of skull, maxilla, mandible, articular disc, teeth, and mouthguard. The impact locations on mandible were gnathion, the center of inferior border, and the anterior edge of gonial angle. And the impact directions were vertical, oblique ($45^{\circ}$), and horizontal. The impact load was 800 N for 0.1 sec. Results: When vertical impact was applied, the similar stress and the distribution pattern was occurred without the relation of the mouthguard use (P>.05). The model with mouthguard was dispersed the stress to the teeth, the facial bone and the skull when the oblique ($45^{\circ}$) impacts were happened. However, the stress was centralized on the teeth in the model without mouthguard(P<.05). The model with mouthguard was dispersed the stress to the teeth, the facial bone and the skull when the horizontal impacts was occurred. However, the stress was centralized on the teeth without mouthguard (P<.05). For all impact loads, stress concentrated on maxillary anterior teeth in model without mouthguard, on the contrary, the stress was low in the model with mouthguard and distributed broadly on maxillary anterior teeth, facial bone, and skull. Conclusion: The mouthguard was less effective at shock absorbing when vertical impact was added. However, it was approved that mouthguard absorbed the shock regarded to the oblique ($45^{\circ}$) and horizontal impact by dispersing the shock to the broader areas and decreasing the stress.
Background: Corticosteroids are known to be significant prognostic parameters in sepsis. Recently, an absolute and relative insufficiency of the corticosteroids system has often been reported to often develop particularly in severe sepsis. Degree of such an adrenal insufficiency not only has prognostic implications but also can be used to guide corticosteroids replacement therapy. The 24-hour urinary cortisol levels as well as serum cortisol concentrations were measured to assess the clinical significance and their relationship with the other parameters of sepsis, and also evaluated the clinical implications of the relative adrenal insufficiency. Methods: 26 consecutive patients with sepsis were enrolled. The basal random serum cortisol, ACTH, ADH, lactate levels and 24-hour urinary free cortisol amount were measured. The rapid ACTH ($250{\mu}g$) stimulation test was also performed. Results: Basal serum cortisol levels were higher in the non-survivors than in the survivors. The 24-hour urinary free cortisol levels were higher in the patients with severe sepsis than in those without. The serum cortisol levels strongly correlated with the serum ADH and lactate levels. The 24-hour urinary free cortisol levels strongly correlated with the serum cortisol and lactate levels. The fractional changes in the cortisol levels after the rapid ACTH stimulation tests correlated with the serum cortisol, ADH, and lactate levels. Conclusion: Both the serum cortisol and 24-hour urinary cortisol were found to be significant prognostic factors in sepsis, and showed a strong correlation with the other parameters. The relative adrenal insufficiency might also be an important clinical parameter.
Park, Gun-Jin;Lee, Hyung-Woo;Park, Byong-Ryol;Park, Sung-Jin;Kim, Jong-Dai
Journal of the Korean Society of Food Science and Nutrition
/
v.38
no.7
/
pp.846-851
/
2009
This study was carried out to investigate the effects of Puerariae Flos extracts on antioxidative potential, free radical generation and the lipid levels in rats. Sprague-Dawley rats were divided into 2 diet groups: AIN-76 diet (control group) and modified AIN-76 diet (cholesterol 0.5%) with 0.5% Puerariae Flos extracts for 4 weeks. Body weight and feed efficiency ratios from both groups were not significantly different. Antioxidative potentials significantly increased in the group fed Puerariae Flos extracts compared to control group (p<0.05). However, there was no difference in free radical generation. The weight of organs, such as heart, kidney, liver, and spleen, in rats were not different in both groups. The ratio HDL cholesterol to total cholesterol in the Puerariae Flos group was significantly higher than in the control group, while the other serum lipid parameters (total cholesterol, HDL cholesterol, triglyceride, and phospholipids) were not different between the two groups. These results imply that supplementation of Puerariae Flos extracts may beneficially contribute to improve antioxidant potential and to decrease the lipid levels in the blood.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.