• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.157-162
• /
• 2020

In recent years, laser induced graphene process have been intensively studied for eco-friendly electronic device such as flexible electronics or thin film based energy storage devices because of its simple and effective process. In order to increase the performance and efficiency of an electronic device using such a graphene patterned structure, it is essential to study an optimized laser patterning condition as small as possible linewidth while maintaining the graphene-specific 2-dimensional characteristics. In this study, we analyzed to find the optimal line pattern by using a Ti:sapphire femtosecond laser based photo-thermal reduction process. we tuned intensity and scanning speed of laser spot for generating effective graphene characteristic and minimum thermal effect. As a result, we demonstrated the reduced graphene pattern of 30㎛ in linewidth by using a focused laser beam of 18㎛ in diameter.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.9-14
• /
• 1993

The free, ester and insoluble bound phenolic acids in the extracts from defatted perilla seed flour were isolated and their antioxidative activities were evaluated in comparison with commercial synthetic antioxidants. Total phenolic content of the perilla seed was 0.75% as chlorogenic acid. Each percent ratio of the content of free, ester, and insoluble bound phenolic acid to total phenolic content was 87.5, 7.5 and 5.0% respectively. Chlorogenic acid was identified as a major phenolic acid and a small amount of caffeic acid was also identified in the free phenolic acid extract, but they were not found in soluble ester and insoluble bound phenolic extracts by two dimensional paper chromatography. Each type phenolic extract from 30g of deffated perilla flour showed antioxidant activity similar to that of BHT (0.02%, w/w) in 200g of soybean oil substrate inspite of the difference of each phenolic content.

• Nuclear Engineering and Technology
• /
• v.9 no.4
• /
• pp.223-236
• /
• 1977

An integral computer code has been developed for a mechanical and thermal design and performance analysis of an oxide fuel rod in a pressurized water reactor. The code designated as FROD 1.0 takes into account the phenomena of radial power depression within the pellet, cracking, densification and swelling of the pellet, fission gas release, clad creep, pellet-clad contact, heat transfer to coolant and buildup of corrosion layers on the clad surface. The FROD 1.0 code yields two-dimensional temperature distributions, dimensional changes, stresses, and internal pressure of a fuel rod as a function of irradiation time within a reasonable computation time. The code may also be used for the analyses of oxide fuel rods in other thermal reactors. As an application of FROD 1.0 the behavior of fuel rod loaded in the first core of Go-ri Nuclear Power Plant Unit 1 is predicted for the two power histories corresponding to steady state operation and Codition II of the ANS Classification. The results are compared with the design criteria described in the Final Safety Analysis Report and a discrepancy between these two values is discussed herein.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.4
• /
• pp.219-230
• /
• 2011

Jurassic granite from Hapcheon was analysed with respect to the characteristics of the rock cleavage. The phases of distribution of microcracks were well evidenced from the enlarged photomicrographs(${\times}6.7$) of the thin section. The planes of principal set of microcracks are parallel to the rift plane and those of secondary set are parallel to the grain plane. These rift and grain microcracks are mutually near-perpendicular on the hardway planes. Consequently the rock cleavage of Jurassic granite from the studied quarry can be related to the preferred orientation of microcracks. Microcrack parameters such as number, length and density show an order of rift > grain > hardway. These results indicate a relative magnitude of the rock cleavage. Meanwhile, brazilian tensile strengths were measured with respect to the six directions. The results revealed a strong correlation between mechanical property with microcrack parameters.

• The Korean Journal of Applied Statistics
• /
• v.32 no.5
• /
• pp.703-720
• /
• 2019

The influence of temperature on electricity demand is increasing due to extreme weather and climate change, and the climate impacts involves nonlinearity, asymmetry and complexity. Considering changes in government energy policy and the development of the fourth industrial revolution, it is important to assess the climate effect more accurately for stable management of electricity supply and demand. This study aims to analyze the effect of temperature change on electricity demand using the partial linear model. The main results obtained using the time-unit high frequency data for meteorological variables and electricity consumption are as follows. Estimation results show that the relationship between temperature change and electricity demand involves complexity, nonlinearity and asymmetry, which reflects the nonlinear effect of extreme weather. The prediction accuracy of in-sample and out-of-sample electricity forecasting using the partial linear model evidences better predictive accuracy than the conventional model based on the heating and cooling degree days. Diebold-Mariano test confirms significance of the predictive accuracy of the partial linear model.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.46-58
• /
• 1991

The synthesized ZnO powder was prepared by spray pyrolysis method using ultrasonic vibrator. The starting solutons were the aqueous solution of $Zn(NO_3)_2\cdot6H_2O$. The concentration was prepared 1M, O.5M, O.25M, and O.lM. The Nz carrier gas was 2.3cm$\cdot{sec}^{-1}$. The prepared powder from the $Zn(NO_3)_2{\cdot}6H_2O$ aqueous solution was Zine oxide with hexagonal structure. The shape of prepared powder was fine size, narrow size distribution, agglomerate-free, nearly sphere particle. Also, the particle size was about $ 0.28-0.61\mum$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.454-463
• /
• 2000

A method is presented to alter the geometry of the conventional linearly shaped wire antenna for increasing its bandwidth. The synthesis is two-demensionally symmetric and is based on the minimization of frequency-dependence of the boresight far-field electric field intensity. The current distribution on the wire is calculated by Galerkin method using pulse functions. The shaping limitation for wide-band characteristics is still found because of standing waves due to reflected waves from antenna ends. The limitation overcome by a distribution of resistive loads near ends of wire. The antenna loaded resistively has flat characteristics satisfying a power gain of $6.5\pm1.1$dBi and VSWR of at most 2 over 10:1 bandwidth. The results are verified by comparing with similar results for the conventional linear V-dipole.

• Journal of Hydrogen and New Energy
• /
• v.24 no.2
• /
• pp.160-171
• /
• 2013

$LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ powder for cathode materials in lithium rechargeable batteries was treated by atmospheric plasma containing hydrogen to investigate the relationship between charge/discharge performance and physical/chemical changes of materials. Hydrogen plasma at atmosphere pressure was irradiated on the surface of active materials, and the change for their crystal structure, surface morphology, and chemical composition were observed by XRD, SEM-EDS and titration method, respectively. The crystal structure and surface morphology of $H_2$ plasma-treated powders were not changed but their chemical compositions were slightly varied. For charge/discharge test, $H_2$ plasma affected initial capacity and rate capability of active materials but continuous cycling was not subject to plasma treatment. Therefore, it was observed that $H_2$ plasma treatment affected the surface of materials and caused the change of chemical composition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.165-170
• /
• 2004

MLCC의 주재료인 $BaTiO_3$는 금속전극의 산화를 방지하기 위해 환원분위기에서 소결하는데 이는 비화학양론적 조성 및 전기적 성질, 결함 그리고 상의 변화를 가져온다. 본 연구에서는 상의 변화를 다양한 온도 범위에서 BaO 또는 $TiO_2$를 첨가시킨 $BaTiO_3$ powder을 가지고 급냉시킨 후 이를 X-선 회절 분석을 통하여 이들의 이차상 형성 여부 등을 조사하였다. $1320^{\circ}C$에서는 $TiO_2$의 고용도가 BaO의 고용도에 비해 상당히 큰 값을 가짐을 알 수 있었다. 이런 결과를 바탕으로 Ba/Ti 비, 산소분압 및 온도에 따른 $BaTiO_3$의 전기전도도 거동에 의하면, 고용범위내에서 BaO 첨가량이 증가할수록 전기전도도의 최소점은 낮은 산소분압쪽으로 이동함을 관찰하였으며 이는 $Ti^{4+}$빈자리에 따른 산소빈자리가 형성되는 결함 모델로 설명되어진다.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.1-13
• /
• 2011

In order to create an intelligent autonomous agent in virtual world, we need a sophisticated design for perception, recognition, judgement and behavior. We develop the perception and recognition functions for such an autonomous agent. Our perception mechanism identifies lines based on differences in color, the primitive visible data, and exploits those lines to grasp shapes and regions in the scene. We develop an inferencing algorithm that can infer the original shape from a damaged or partially hidden shape using its characteristics from the ontology in order to intelligently recognize the perceived shape. Several individually recognized 2D shapes and their spatial relations form 3D shapes and those 3D shapes in turn constitute a scene. Each 3D shape occupies its respective region, and an agent analyzes the associated objects and relevant scenes to recognize things and phenomena. We also develop a mechanism by which an agent uses this recognition function to accumulate and use her knowledge on the scene in the historical context. We implement these functions presented above against an example situation to demonstrate their sophistication and realism.