• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.1
• /
• pp.22-29
• /
• 2003

A circuit model for the transition of stripline to dual slotline and a segmented method to analyze a notch antenna are presented. For the circuit model of the transition, the characteristic impedance, dispersions, and the shorted impedance of dual slotline are calculated and approximated with the closed-form expressions. The segmented analysis method allows to get readily an optimized results for the dual slotline-fed notch antenna. As a design example, a notch antenna is segmented into a 4'h order Marchand balun and a dual slot 134 notch antenna, and tested to show the validity of the proposed circuit model.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.64-66
• /
• 2002

최근 다차원 공간색인 방법의 성능 향상을 위해 근사법을 사용하여 노드의 팬아웃을 증가시키려는 시도가 많이 행해졌다. 하지만 이러한 방법은 색인 구조의 정확성이 떨어져 불필요한 노드를 방문할 확률을 높다는 단점이 있다 본 논문에서는 정적 데이터에 대하여 노드의 팬아웃을 증가시키기 위해 하향식 STR 공간분할방법을 사용한 새로운 색인 방법을 제안한다. 제안한 방법은 공간분할방법을 사용하므로 근사법을 이용한 방법에 비해 정확성이 높을 백 아기라 하향식 계층 STR을 제안하여 STR 공간 분할방법을 효율적으로 트리 구조에 적용할 수 있도록 하였다. 이 피에도 이중분할 방법을 제안하여 점 데이터 및 사각형 데이터의 색인을 가능하게 딸 딱 아니라 사상 공간을 줄여 불필요한 노드의 방문을 막아 성능을 향상시켰다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.6
• /
• pp.1-5
• /
• 1977

The input equivalent resistances and operating properties of a transless double balanced modulator are quantitatively investigated in considerations of the nonlinear characteristics of diodes. The input equivalent resistances are derived from the power loss calculations of the circuit. Carrier suppression and modulation efficiency are calculated by using approximate equations which describe the dynamic curves of the diode circuits. The results are represented as a function of the voltage amplitude of a carrier signal owing to the nonlinear characteristics of diodes.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.39-44
• /
• 1999

An analysis of the frequency parameters and vibrational modes is described for a rectangular plate. Double Fourier sine series is used as a modal displacement functions of a rectangular plate and applied to the free vibration analysis of a rectangular plate under various boundary conditions. The frequency parameters obtained by the double Fourier sine series method are compared with those obtained by the theory of finite element method and Ritz method. Frequency parameters are presented for the various aspect ratios for plate. The first four modal shapes for the rectangular plate under various boundary conditions are accurately described.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.76-83
• /
• 2005

In this study a general method for computing offsets of free form curves is presented. In the method arbitrary free form curve is approximated with point series considering required tolerance. The point series are offset precisely using the normal vectors computed at each point and loop removal is carried out by the newly suggested algorithm. The resulting offset points are transformed to lines and arcs using the biarc approximation method. Tangent vectors for approximation of discrete points data are calculated by traditional local interpolation scheme. In order to show the validity and generality of the proposed method , various of offsettings are carried our for the base curves with complex shapes.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.4
• /
• pp.505-517
• /
• 2008

A numerical analysis method was studied to predict the nonlinear behavior of slender double skin composite walls. For convenience in numerical analysis, the model for the double skin composite wall was developed as a macroscopic model that can predict nonlinear behavior with relatively simplified models. For the wall showing flexure-dominant behavior, a multiple layer model was used. Each layer was modeled with composite elements of concrete and steel plate. An X-type truss model was used for coupling beams showing shear-dominant behavior. To describe the cyclic behavior of concrete and steel elements, simplified cyclic models for the materials were proposed. The proposed analysis model was applied to isolated walls and coupled walls with rectangular or T-shaped cross-sections. The analytical results were compared with existing test results.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.40-51
• /
• 2014

This study aims to investigate urban inundation considering building footprints based on dual-drainage scheme. For this purpose, LiDAR data is cultivated to generate two original data set in terms of DEM with $1{\times}1$ meter and building layer of the study drainage area in Seoul and then the building layer is overlapped as vector polygon with the mesh data with the same size as DEM. Then, terrain data for modeling were re-sampled to reduce resolution as $10{\times}10$ meters. As results, the simulated depth without considering building footprints has a tendency to underestimate the inundation depth compared to observed data analized by CCTV imagery. Otherwise, the simulation result considering building footprints revealed definitely higher fitness. The difference of inundation depth came from the variation of inundation volume which was relevant to inundation extent. If the building footprints are enlarged, the possible inundation depth is increased, which results in being inundation depth higher because hydrological conditions such as rainfall depth are conservational. Otherwise, according to comparison of inundation extents, there were no significant difference but the case of considering building footprint was revealed slightly higher fitness. Thus, it is concluded that the considering building footprint for inundation analysis of urban watershed should be required to improve simulation accuracy synthetically.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.253-260
• /
• 2016

In this paper, derivation of the STL (Sound Transmission Loss) of the double plates installed in an impedance tube is discussed using an analytic method, where an air cavity exists between the plates. Vibration of the plates and sound pressure field inside the tube are expressed in terms of infinite series of modal functions. Under the plane wave assumption, it is shown that consideration of the first few modes yields sufficiently accurate results, and locations of peaks and dips are investigated. It is determined that the peak frequencies of the double plates coincide with those of each single plate. When the two plates are identical, the STL of the double plates as well as that of the single plate become zero at the natural frequencies of the single plate. The location and amplitude of the dips are investigated using an approximation solution when the cavity depth is very small.

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.4
• /
• pp.1-7
• /
• 2002

This paper presents a new approach for modeling human limbs shape from 3D scan data. Based on the cylindrical structure of limbs, the overall shape is approximated with a set of ellipsoids through ellipsoid fitting and interpolation of fit-ellipsoids. Then, the smooth domain surface representing the coarse shape is generated as the envelope surface of ellipsoidal sweep, and the fine details are reconstructed by constructing parametric displacement function on the domain surface. For fast calculation, the envelope surface is approximated with ellipse sweep surface, and points on the reconstructed surface are mapped onto the corresponding ellipsoid. We demonstrate the effectiveness of our approach for skeleton-driven body deformation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1416-1427
• /
• 2012

This paper proposes a design technique of a survivable ship backbone network, which describes a near optimal configuration scheme of physical and logical topologies of which the survivable ship backbone network consists. We first analyze and present an efficient architecture of a survivable ship backbone network consisting of redundant links and ship devices with dual communication interfaces. Then, we present an integer linear programming-based configuration scheme of a physical topology with regard to the proposed ship backbone network architecture. Finally, we present a metaheuristic-based configuration scheme of a logical topology, underlying the physical topology.