• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.585-593
• /
• 2007

This paper presents a model for durability evaluation of concrete structures exposed to marine environment, considering mainly a build-up of surface chloride $(C_s)$ as well as diffusion coefficient (D) and chloride threshold level $(C_{lim})$. In this study, time dependency of $C_s$ and D were extensively studied for more accurate evaluation of service life of concrete structures. An analytical solution to the Fick's second law was presented for prediction of chloride ingress for time varying $C_s$. For the time varying $C_s$, a refined model using a logarithm function for time dependent $C_s$ was proposed by the regression analysis, and averaging integrated values of the D with time over exposed duration were calculated and then used for prediction of the chloride ingress to consider time dependency of D. Durability design was also carried out for railway concrete structures exposed to marine environment to ensure 100 years of service life by using the proposed models along with the standard specification on durability in Korea. The proposed model was verified by the so-called performance-based durability design, which is widely used in Europe. Results show that the standard specification underestimates durability performances of concrete structures exposed to marine environment, so the cover depth design using current durability evaluation in the standard specifications is very much conservative. Therefore, it is found that utilizing proposed models considering time dependent characteristics of $C_s$ and D can evaluate service lift of concrete structures in marine environment more accurately.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.49-54
• /
• 2022

The copper plating process used to fabricate the submicron damascene pattern of Cu wiring for Si wafer was applied to the plating of a PCB pattern of several tens of microns in size using the same organic additives and current density conditions. In this case, the non-uniformity of the plating thickness inside the pattern was observed. In order to quantitatively analyze the cause, a numerical calculation considering the solution flow and electric field was carried out. The calculation confirmed that the depletion of Cu²⁺ ions in the solution occurred relatively earlier at the bottom corner than the upper part of the pattern due to the plating of the sidewall and the bottom at the corner of the pattern bottom. The diffusion coefficient of Cu²⁺ ions is 2.65 10^-10 m²/s, which means that Cu²⁺ ions move at 16.3 ㎛ per second on average. In the cases of small damascene patterns, the velocity of Cu²⁺ ions is high enough to supply sufficient ions to the inside of the patterns, while sufficient time is required to replenish the exhausted copper ions in the case of a PCB pattern having a size of several tens of microns. Therefore, it is found that the thickness uniformity can be improved by reducing the current density to supply sufficient copper ions to the target area.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.41-47
• /
• 1999

Ion implanted GaAs MESFET with low resistive layer was fabricated using Si diffusion into GaAs from SiN. During the thermal annealing at 95$0^{\circ}C$ for 30s, Si diffused into ion implanted region of GaAs from SiN and they formed low resistive layer of 350$\AA$ thickness. The diffusion of Si decreased the sheet resistance of source and drain region from 1000$\Omega$/sq. to 400$\Omega$/sq. and the AuGe/Ni/Au ohmic contact resitivity from 2.5$\times$10sub -6$\Omega$-cmsup 2 to $1.5\times$10sup -6$\Omega$-cmsup 2. The fabricated lum gate length MESFET with Si diffused surface layer shows the transconductance of 360ms/mm, 8.5dB of associated gain and 3.57dB of minimum noise figure at 12GHz. These performances are better than that of MESFET without Si diffused layer.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.261-268
• /
• 2004

Corrosion of reinforcement is the main cause of damage and early failure of reinforced concrete structures. The corrosion is mainly progressed by the chloride ingress. In this paper, an experimental study is executed to investigate the effect of concrete properties and testing methods on the coefficients of chloride diffusion. Also, it is surveyed the relationship between total chloride and free chloride in concrete. According to this experiment results, W/C ratio and testing method affect chloride diffusion coefficient of concrete. As W/C ratio is increased, diffusion coefficient in concrete is also increased. Diffusion coefficient obtained by each testing method show the different values, respectively. The model equation of diffusion coefficient with W/C ratio is proposed.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.121-128
• /
• 1985

The electrochemical reduction of uranyl ion in aqueous basic media has been examined by d. c. polarography, differential pulsed polarography and cyclic voltammetry. From voltammograms obtained in uranyl solutions containing 0.1M sodium bicarbonate, either with or without the same amounts of sodium tripolyphosphate it is concluded that the first wave corresponds to the reduction of $UO_2^{2+}$ to $UO_2^+$. It is assumed that the uranyl ion undergoes appreciable hydrolysis in these media. The hydrolysis product $UO_2OH^+$ from $UO_2^{2+}$ is not reduced at the first wave, but is reduced at the second wave together with $UO_2^+$. The diffusion current was found proportional to the uranyl concentration in a range between $7.5 {\times} 10^{-4}$ and $3.75 {\times}10^{-3}$M.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.147-154
• /
• 2005

It is found that as contents of chloride ion and age increase, area of corrosion also increases. Inare increased to 1035 days from 730 days, slope of increase of corrosion area is greatest. Non-rust inhibitor specimens show corrosion area of 8~35 times more than rust inhibitor specimens and anticorrosive effects by application of rust inhibitor can be confirmed. When chloride ion is not contained, corrosion control effects of steel reinforcing according to increase of thickness are found, but specimens having chloride ion show no regular tend of thickness and corrosion due to complex problems such as reverse diffusion of chloride and test errors.

• Clean Technology
• /
• v.18 no.3
• /
• pp.320-324
• /
• 2012

In the present study, the discharge characteristics of a lithium-ion battery was evaluated to calculate the rate of heat generation under various discharge rates by mathematical modeling. The modeling and simulation of a pseudo-two dimensional ionic transport system for governing Butler-Volmer equation were carried out by using FEMLAB as a PDE (partial differential equation) solver, where the discharge rate was changed from 5 $A/m^2$ to 25 $A/m^2$. The computational results showed that the concentration of consumed solid-phase lithium at the surface of electrode was increased with increasing discharge rates. While the resulting diffusion limitation occurred shortly, it increased the rate of heat generation even more rapidly for the internal voltage to approach the cutoff voltage of the lithium-ion battery.

• Nuclear Engineering and Technology
• /
• v.7 no.2
• /
• pp.95-106
• /
• 1975

A comparative study has been carried out on three silicon solar cell samples through their current-voltage (I-V) characteristics and their efficiencies. One sample is an ion-implanted cell made by our laboratory, and the other two samples are the dopant-diffused cells made by a foreign maker. The experiments have shown that both the properties of junction formation and the efficiency of each sample depend highly on the I-V characteristic of each p-n junction. The cause of incomplete properties in the ion-implanted sample has been clarified through this comparative study to be due to the various reasons such as slightly deficient surface impurity concentrations, defects induced by both the radiation and the foreign impurities, and insufficient ohmic contacts at the electrodes. The conversion efficiency of the ion-implanted sample can be figured out to be 4.2% whereas those of the other samples to be 14.3% and 8.3%, respectively.

• Composites Research
• /
• v.32 no.5
• /
• pp.296-300
• /
• 2019

Two dimensional transition metal carbides and/or nitrides, known as MXenes, are a promising electrode material in energy storage due to their excellent electrical conductivity, outstanding electrochemical performance, and abundant functional groups on the surface. Use of $Ti_3C_2$ as electrode material has significantly enhanced electrochemical performance by providing more chemically active interfaces, short ion-diffusion lengths, and improved charge transport kinetics. Here, we reports the efficient method to synthesize $Ti_3C_2$ from MAX phase, and opens new avenues for developing MXene based electrode materials for Lithium-Ion batteries.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.57-62
• /
• 2000

Sulfonated Polysulfone (SPSF) cation-exchange membranes were synthesized by introducing various ratio of chlorosulfuric acid (CSA) onto the main chain of polysulfone (PSF). Properties such as ion exchange capacity, water content, liked ion concentration, and partition coefficient were measured, respectively. Through the analysis of DSC and TGA, it has been shown that glass transition temperature increased and weight loss decreased as sulfuric acid group concentration increased. Structure of membrane measured by AFM and SEM was seen to be asymmetric. Apparent diffusion coefficient of sodium ions through SPSF membrane by AC impedance was increased as sulfuric acid group concentration increased.