• Korean Journal of Logic
• /
• v.23 no.2
• /
• pp.71-115
• /
• 2020

It seems certain that even if the same evidence is in itself given for any hypotheses, the way how it is obtained makes some differences in its support degree of them. In this respect, it is worth paying our attention to Mayo's conception of "severe test" and her technical development of it, which are just concerned with the procedures of getting evidence. Nonetheless, there have been criticisms against her theory from various respects. Among them, here this paper focuses on those especially raised by Jung (2018) and Iseda (1999). And it attempts to defend Mayo's theory on behalf of her against their critiques. For this purpose, the paper also proposes particularly a new concept of what is called the "mechanism generating an evidence-hypothesis". On the way, Mayo's own faults are revealed as well.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1780-1787
• /
• 1992

Experiments have been performed on the thermal behavior in a liquid saturated porous medium in a system to simulate a single well aquifer thermal energy storage system. The principal interests in this study are the combined effects of forced and natural convection. Significant buoyancy flow due to natural convection is developed quickly as the temperature difference between the injection and original aquifer temperature increases. Theoretical model under simplified assumptions (called simple buoyancy flow model in this study) has been developed. The results of this model agree well with the experiments. The effects of buoyancy flow on the recovery factor are also examined in this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.193-196
• /
• 2005

In this study, the purpose is to suggest the data on mixing ratio which effects on the carbonation of concrete by replacing various admixture such as silica fume, fly ash, slag powder. Thus, we have experimented the accelerated test on the carbonation related to hardened body of the concrete which was admixed by slag powder, silica fume, fly ash and it was cured for 4 weeks in carbonation accelerator after 28 days curing water. The result of this experiment showed that carbonation speed increased highly when admixtures be used to replacing by growing of admixture ratio. especially, the test sample which was replaced with silica fume 15$\%$ and slag powder 40$\%$, was promoted highly to carbonation.

• Journal of Korea Multimedia Society
• /
• v.22 no.7
• /
• pp.759-769
• /
• 2019

Since a surgery simulation should be able to represent the internal structure of the human body, it is advantageous to adopt volume based techniques rather than polygon based techniques. However, the volume based techniques induce large computation to deform heterogeneous volume datasets such as bones and muscles. In this study, we propose a new method to deform volume data using multi-core CPUs. By improving previous studies, the proposed method minimizes unnecessary propagation operations. Moreover, we propose an efficient task-partitioning method for volume deformation using multi-core CPUs. As a result, we can simulate the deformation of heterogeneous volume data at an interactive speed without special hardware.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.157-159
• /
• 2007

광속구에서 광원(light source)의 광속(luminous flux)을 측정할 때, 통상적인 측정환경의 변화는 보조램프(aux. lamp)를 사용하여 그 차이를 보정할 수 있다. 그러나 PLS(plasma lighting system)와 같이 표준광원과 시료광원의 위치가 크게 다를 경우에는 그에 따른 광속변화를 직접 측정하고 보정계수를 산출 반영하거나 시료광원의 측정위치와 동일한 위치에서 Calibration을 시행해야 할 것이다. 따라서 본 논문에서는 광속구에서의 기존 광원의 광학적 특성치를 통하여 새롭게 개발되는 광원류에 대한 부 표준램프를 제작 실험한 결과를 제시한 것이다. 광속구에서의 광특성은 센터와 사이드 측정방식에 의한 특성결과치를 기준으로 보정계수를 구하고 부 표준램프를 제작하였다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.21-29
• /
• 2000

The Purpose of this paper is to determine the effect of the autoclave inner pressure rate, heat-up rate, tool round angle, Thickness of core, height of joggle on defects, and to minimize the defects of aircraft sandwich structure reinforced with honeycomb core occurred in autoclave processing. The results showed that the geometry of aircraft sandwich structure and tool such as tool round angle, Thickness of core, height of joggle, and the autoclave cure conditions such as inner pressure rate, heat up rate strongly affected the core movement, core wrinkle, bridge phenomenon of prepreg and depression of core that occurred in autoclave processing.

• The Korean Journal of Pesticide Science
• /
• v.20 no.3
• /
• pp.211-220
• /
• 2016

This study was to develop the analytical reference material of green-pepper for multi-residue analysis of pesticides. According to the ISO Guide 35, ISO Guide 13528 and EURL-PT protocol, the homogeneity, stability, assigned value and uncertainty were calculated to assess if it was suitable to be used as the proficiency test or quality control. The values of the within-bottle standard variation ($s_{wb}$) and the between-bottle standard variation ($s_{bb}$) were 1.7~3.7% of assigned value according to the requirement of the ISO guide 35. And, the uncertainty ($u^*{_{bb}}$) due to inhomogeneity was 0.8~1.1% for all pesticides. The storage stabilities of ten-pesticides at various conditions were assessed. For all target pesticides, the slop ($b_1$) values were smaller than the corresponding values of $[t_{0.95,n-2}{\times}s(b_1)]$ specified by the ISO guide 35, indicating that there were no statistically significant decreases in the concentration of the target pesticides when the analytical reference material was stored at room temperature ($20{\sim}30^{\circ}C$) for 7 days, freezing ($-20^{\circ}C$) for 30 days and deep freezer ($-80^{\circ}C$. except for bifenthrin, fenpropathrin) for 245 days. For proficiency test by using it developed by Korea Institute of Toxicology, inter-lab test was performed with eight organization performing the residual pesticide analysis. We found that there were some different results among them. Some were assessed as questionable or unacceptable for two pesticides and one organization didn't analyze the six pesticides. From these results, this green-pepper analytical reference material containing ten-pesticides could be used as a tool for the proficiency test to improve the reliability or consistency for pesticide residue's results.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.10
• /
• pp.17-25
• /
• 2005

The bender element method is an experimental technique to determine very small strain ($<10^{-3}\%$), elastic shear modulus of a soil, $G_{max}$ by measuring the velocity of shear wave propagation through a sample. Bender elements have been applied as versatile transducers to measure small strain modulus of wet or dry soils in various laboratory apparatus. In this paper, bender element (BE), resonant column (RC) and torsional shear (TS) tests were performed on Toyoura sand at various testing conditions using the modified Stokoe type RC/TS testing equipment capable of performing BE test. Based on the results, applicabilities of the testing method using bender element were evaluated by comparing the values of $G_{max}$ obtained from RC/TS and BE testing methods. For more dependable evaluation, the loading frequency of each testing method was considered for the results obtained for samples in saturated condition by adapting Biot's theory.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.112-117
• /
• 2016

This research compared the tensile performance of the vegetation mat, which was developed byu using the rapidly growing biodegradable plastic, Poly Lactic Acid(PLA), according to the biodegradation period. The test applied the method defined by Korean Standard KS. In the result of experiment using single-material PLA mesh and PLA plastic, the tensile strength and molecular weight were inverse-proportional to the 5 months of biodegradation period. The thickness of PLA mesh was increased by 11.2~13.4% while the tensile strenth of it was reduced by 32.4~55.4%. The tensile strength and molecular weight of PLA plastic were also reduced over time. However, the tension test of vegetation mat comprised of PLA mesh, non-woven fabric (including seeds), and jute net didn't have specific tendency.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.355-364
• /
• 2000

Application sharing for collaborative works make multiple participants to be capable of collaborative developments through sharing development tools and applications which is distributed to various system without spatial restriction. However, applying legacy application sharing to CSCW based virtual environment has a problem because it dont consider 3D space and it disturbs the harmonic interaction of participants. In this study, we designed application sharing system for collaborative works in 3D virtual environment to share application effectively on collaborative virtual environment. The designed application sharing system for collaborative works in 3D virtual environment consist of application sharing manager, group manager and communication manager. This system is able to perceive event of 3D space about application of participant on 3D virtual environment by agent which moves to participant sites and get an ordered events and conflict among participants through scheduling. Therefore, designed application sharing system for collaborative work in 3D virtual environment can support efficient collaborative works and improve reusability of legacy application through using easily legacy application in 3D virtual environment when CSCW application development for virtual environments.