• Title/Summary/Keyword: 이상수

Search Result 51,954, Processing Time 0.093 seconds

Electrochemical Performance of CB/SiOx/C Anode Materials by SiOx Contents for Lithium Ion Battery (SiOx 함량에 따른 CB/SiOx/C 음극재의 전기화학적 특성)

  • Kim, Kyung Soo;Kang, Seok Chang;Lee, Jong Dae;Im, Ji Sun
    • Applied Chemistry for Engineering
    • /
    • v.32 no.1
    • /
    • pp.117-123
    • /
    • 2021
  • In this study, the composite was prepared by mixing SiOx, soft carbon, and carbon black and the electrochemical properties of lithium ion battery were investigated. The content of SiOx added to improve the capacity of the soft carbon anode material was varied to 0, 6, 8, 10, 20 wt%, and carbon black was added as a structural stabilizer for reducing the volume expansion of SiOx. The physical properties of prepared CB/SiOx/C composite were investigated through XRD, SEM, EDS and powder resistance analysis. In addition, the electrochemical properties of prepared composite were observed through the charge/discharge capacity, rate and impedance analysis of the lithium ion battery. The prepared CB/SiOx/C composite had an inner cavity capable of mitigating the volume expansion of SiOx by adding carbon black. The formed internal cavity showed a low initial efficiency when the SiOx content was less than 8 wt%, and low cycle stability when the content of SiOx was less than 20 wt%. The CB/SiOx/C composite containing 10 wt% of SiOx showed an initial discharge capacity of 537 mAh/g, a capacity retention rate of 88%, and a rate of 79 at 2C/0.1C. SiOx was added to improve the capacity of the soft carbon anode material, and carbon black was added as a structural stabilizer to buffer the volume change of SiOx. In order to use the CB/SiOx/C composite as a high-efficiency anode material, the mechanism of the optimal SiOx and the use of carbon black as a structural stabilizer was discussed.

Evaluation of antioxidant properties and oxidative stability of oregano seed solvent fraction (추출용매에 따른 오레가노 종자 분획물의 항산화 및 유지산화안정성 평가)

  • Lee, Hyun-Jong;Kim, Min-Ah;Hong, Sungsil;Kim, Mi-Ja
    • Korean Journal of Food Science and Technology
    • /
    • v.53 no.1
    • /
    • pp.12-18
    • /
    • 2021
  • The in vitro antioxidant activity of oregano seed fractions, fractionizing with 80% ethanol, n-hexane, ethyl acetate, n-butanol, and water, was evaluated, and their effects on edible oils were determined in corn oil at 180℃. The ethyl acetate fraction had the highest radical-scavenging activity. The ferric reducing antioxidant power activity and total phenol content of the ethyl acetate fraction were determined as 6,130 µmol ascorbic acid equivalents/g extract and 770 µmol tannic acid equivalents/g extract, respectively, which were significantly higher than those of the other fractions (p<0.05). Primary and secondary oxidation products in corn oil added with the ethyl acetate fraction of oregano seed significantly decreased by 1.5 and 1.26 times, respectively, compared with those in the control groups. The major volatile ingredients in the ethyl acetate fraction of oregano seeds were determined to be carvacrol, thymoquinone, and 3-cyclopentylcyl-cyclopentan-1-one. Ethyl acetate is a suitable solvent for extracting antioxidant compounds from oregano seeds and can be used as a natural antioxidant.

A Study on the Structural Reinforcement of the Modified Caisson Floating Dock (개조된 케이슨 플로팅 도크의 구조 보강에 대한 연구)

  • Kim, Hong-Jo;Seo, Kwang-Cheol;Park, Joo-Shin
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.1
    • /
    • pp.172-178
    • /
    • 2021
  • In the ship repair market, interest in maintenance and repair is steadily increasing due to the reinforcement of prevention of environmental pollution caused by ships and the reinforcement of safety standards for ship structures. By reflecting this effect, the number of requests for repairs by foreign shipping companies increases to repair shipbuilders in the Southwest Sea. However, because most of the repair shipbuilders in the southwestern area are small and medium-sized companies, it is difficult to lead to the integrated synergy effect of the repair shipbuilding companies. Moreover, the infrastructure is not integrated; hence, using the infrastructure jointly is a challenge, which acts as an obstacle to the activation of the repair shipbuilding industry. Floating docks are indispensable to operating the repair shipbuilding business; in addition, most of them are operated through renovation/repair after importing aging caisson docks from overseas. However, their service life is more than 30 years; additionally, there is no structure inspection standard. Therefore, it is vulnerable to the safety field. In this study, the finite element analysis program of ANSYS was used to evaluate the structural safety of the modified caisson dock and obtain additional structural reinforcement schemes to solve the derived problems. For the floating docks, there are classification regulations; however, concerning structural strength, the regulations are insufficient, and the applicability is inferior. These insufficient evaluation areas were supplemented through a detailed structural FE-analysis. The reinforcement plan was decided by reinforcing the pontoon deck and reinforcement of the side tank, considering the characteristics of the repair shipyard condition. The final plan was selected to reinforce the side wing tank through the structural analysis of the decision; in addition, the actual structure was fabricated to reflect the reinforcement plan. Our results can be used as reference data for improving the structural strength of similar facilities; we believe that the optimal solution can be found quickly if this method is used during renovation/repair.

Nutritional status and metabolic syndrome risk according to the dietary pattern of adult single-person household, based on the Korea National Health and Nutrition Examination Survey (국민건강영양조사 자료에 의한 식이 패턴별 1인 가구의 영양 상태와 대사증후군 위험도)

  • Keum, Yu Been;Yu, Qi Ming;Seo, Jung-Sook
    • Journal of Nutrition and Health
    • /
    • v.54 no.1
    • /
    • pp.23-38
    • /
    • 2021
  • Purpose: This study was undertaken to evaluate the health, nutritional status and metabolic syndrome risk according to the dietary pattern of adult single-person households, using information obtained from the Korea National Health and Nutrition Examination Survey (KNHANES). Methods: Data were collected from the 2013-2016 KNHANES, of adults aged 19-64 years, belonging to single-person households. Based on cluster analysis, the dietary patterns of subjects were classified into three groups. The dietary behavior factors, health-related factors, nutritional status, and prevalence of metabolic syndrome obtained from KNHANES questionnaires were compared according to the individual dietary pattern. The nutrient intake data of the subjects were calculated using the semi-food frequency questionnaire. Moreover, blood and physical measurement data of the subjects were analyzed to obtain the prevalence of metabolic syndromes. Results: The major dietary intakes of subjects were classified as 'Rice and kimchi', 'Mixed', and 'Milk·dairy products and fruits' patterns. Characteristics of subjects based on their dietary pattern, gender, age, and education level were significantly different. The 'Milk and fruits' pattern showed low frequency of skipping breakfast and eating out, and had higher intake of dietary supplements. Frequency of alcohol intake and smoking rates were highest in the 'Mixed' pattern. Maximum nutrient intake of fat, vitamin A, riboflavin, vitamin C, niacin, calcium, phosphorus, and potassium was obtained in the 'Milk·dairy products and fruits' pattern. According to dietary patterns adjusted for age and gender, the risk of metabolic syndrome was 0.380 times lower in the 'Milk·dairy products and fruit' pattern than in the 'Rice and kimchi' pattern. However, when adjusted for other confounding factors, no significant difference was obtained between dietary patterns for metabolic syndrome risk. Conclusion: These results indicate that the health and nutritional status of a single-person household is possibly affected by the dietary intake of subjects.

Evaluation of Regional Flowering Phenological Models in Niitaka Pear by Temperature Patterns (경과기온 양상에 따른 신고 배의 지역별 개화예측모델 평가)

  • Kim, Jin-Hee;Yun, Eun-jeong;Kim, Dae-jun;Kang, DaeGyoon;Seo, Bo Hun;Shim, Kyo-Moon
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.22 no.4
    • /
    • pp.268-278
    • /
    • 2020
  • Flowering time has been put forward due to the recent abnormally warm winter, which often caused damages of flower buds by late frosts persistently. In the present study, cumulative chill unit and cumulative heat unit of Niitaka pear, which are required for releasing the endogenous dormancy and for flowering after breaking dormancy, respectively, were compared between flowering time prediction models used in South K orea. Observation weather data were collected at eight locations for the recent three years from 2018-2020. The dates of full bloom were also collected to determine the confidence level of models including DVR, mDVR and CD models. It was found that mDVR model tended to have smaller values (8.4%) of the coefficient of variation (cv) of chill units than any other models. The CD model tended to have a low value of cv (17.5%) for calculation of heat unit required to reach flowering after breaking dormancy. The mDVR model had the most accurate prediction of full bloom during the study period compared with the other models. The DVR model usually had poor skills in prediction of full bloom dates. In particular, the error of the DVR model was large especially in southern coastal areas (e.g., Ulju and Sacheon) where the temperature was warm. Our results indicated that the mDVR model had relatively consistent accuracy in prediction of full bloom dates over region and years of interest. When observation data for full bloom date are compiled for an extended period, the full bloom date can be predicted with greater accuracy improving the mDVR model further.

Evaluation Method of Cosmetics for the Effect of Fine Dust Adhesion Prevention Using Floating Chamber (부유챔버를 이용한 화장품의 미세먼지 부착방지 효과 평가법)

  • Kim, Woncheol;Kim, Han Jo;Boo, Yong Chool;Koh, Jae Sook;Baek, Ji Hwoon
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.46 no.4
    • /
    • pp.319-327
    • /
    • 2020
  • Particulate matters (PM) are small particulate pollution that decrease the function of skin barrier, which causes inflammatory skin diseases and extrinsic aging. In this study, we evaluated the effect of preventing the adherence of PMs from several cosmetic products applied to human skin using iron oxide black. The PM floating chamber consists of skin exposure area, PM inlet, floating power device, and an outlet so that PM can be naturally attached to the skin while floating in the chamber. The change in skin brightness according to the floating concentration of alternative fine dust was checked to confirm the optimal floating concentration conditions. The intensity difference (before-after intensity, Δ) before and after adhesion of iron oxide black was proportional to the amount of PM adhered. The anti-adherence effect of iron oxide black on five cosmetic products were evaluated through 20 each subjects by comparing the amount of iron oxide black adhered on the control and treatment. The difference in brightness before and after the iron oxide black attached to the skin was calculated and compared with the control group(p < 0.05). When over 150 mg of iron oxide black was adhered on the skin, the interference of intensity was low and clearly showed the skin adhered pattern. According to the application of the five cosmetics, the intensity difference was significantly lower than the control group. This means that depending on the product, it prevented the attachment of iron oxide black. This study is a safe and useful method to confirm the prevention of PM skin adherence. In conclusion, cosmetics can prevent the adherence of PM on the skin according to the formulation or ingredients characteristics.

Health and nutrition intake status of the Korean elderly according to their food security level: data from the 7th Korea National Health and Nutrition Examination Survey (KNHANES VII), 2016-2018 (식품안정성 수준에 따른 한국노인의 건강상태와 영양섭취현황: 제7기 (2016-2018) 국민건강영양조사 자료 활용)

  • Maeng, Ahreum;Lee, Jeehyun;Yoon, Eunju
    • Journal of Nutrition and Health
    • /
    • v.54 no.2
    • /
    • pp.179-198
    • /
    • 2021
  • Purpose: This study examined general characteristics, health status, accessibility to medical services, health-related quality of life, dietary behavior, and energy and nutrient intakes of the elderly at different levels of food security utilizing data from the 7th Korea National Health and Nutrition Examination Survey (2016-2018). Methods: The elderly subjects (1,721 males and 2,271 females) were divided into 3 groups (secure, mildly insecure, moderately/severely insecure) according to their food security levels. Health and nutrient status was determined using energy intake, nutrient density, the prevalence of insufficient nutrient intake, dietary behavior, and health status. Results: The elderly with food insecurities had a lower self-evaluated health status and a higher prevalence of physician-diagnosed chronic diseases such as arthritis, osteoarthritis, rheumatoid arthritis, osteoporosis for males, and hypertension, stroke, arthritis, and osteoarthritis for females. The associated financial burden was the major reason for not accessing medical services in the food insecure group. Furthermore, the food insecure group had a higher risk of impaired health-related quality of life compared to the secure group. The proportion of subjects with an energy intake below the estimated energy requirement was higher in the food insecure group and a significantly higher prevalence of insufficient intake was observed for all the nutrients (proteins, vitamin A, vitamin B1, vitamin B2, niacin, vitamin C, calcium, and iron) assessed in this study compared to the food secure group. Conclusion: This study suggests that food insecurity poses a challenge to the health and nutritional status of the elderly population in Korea and needs proper management. It would be helpful to develop food and nutrition assistance programs to ensure the food stability of the elderly population and assure quality to address gaps in their nutrient intake.

The Effect of the Self-Efficiency of Older People on the Quality of Life - Based on the mediated effect of self-respect - (노인의 자기효능감이 삶의 질에 미치는 영향 - 자아존중감의 매개효과를 중심으로 -)

  • Tae, Myeong-Won
    • The Journal of the Korea Contents Association
    • /
    • v.21 no.4
    • /
    • pp.220-232
    • /
    • 2021
  • The purpose of this study is to analyze the effects of the old people's self-efficacy on the quality of life. In other words, the impact of old people's self-efficacy on self-respect, old people's self-efficacy on quality of life, and old people's self-respect on quality of life were analyzed in depth. In particular, it was intended to use the recently emphasized variables of self-respect to verify the mediated effects of self-respect in the relationship between self-efficacy and flesh quality, suggesting ways to lead a happy life by improving the psychological satisfaction and quality of life through the participation of the elderly in sports-for-all. To achieve this purpose, 297 people aged 60 or older who participated in the sports-for-all program conducted by the city and district offices in Seoul for five months from May 1 to September 30, 2018 or who used public sports facilities such as parks and playgrounds were analyzed as subjects for research. The findings are as follows. First, the "self-efficacy" of the elderly participating in the sports-for-all has been shown to affect "self-respect." Second, the "self-efficacy" of the elderly participating in the sports-for-all has been shown to affect the "quality of life." Third, it has been shown that the "self-respect" of the elderly participating in sports for all affects the quality of life. Fourth, the "self-esteem" of the elderly participating in sports for all occurred in the relationship between self-efficacy and quality of life. The implications of this study are that the self-efficacy of the elderly participating in sports for daily life has been identified by using the parameters of self-respect. Through this, it was provided as empirical basic data to establish welfare policies for senior citizens to improve the quality of life of senior citizens by identifying their self-efficacy, self-respect, and quality of life.

Estimation of the Lodging Area in Rice Using Deep Learning (딥러닝을 이용한 벼 도복 면적 추정)

  • Ban, Ho-Young;Baek, Jae-Kyeong;Sang, Wan-Gyu;Kim, Jun-Hwan;Seo, Myung-Chul
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.66 no.2
    • /
    • pp.105-111
    • /
    • 2021
  • Rice lodging is an annual occurrence caused by typhoons accompanied by strong winds and strong rainfall, resulting in damage relating to pre-harvest sprouting during the ripening period. Thus, rapid estimations of the area of lodged rice are necessary to enable timely responses to damage. To this end, we obtained images related to rice lodging using a drone in Gimje, Buan, and Gunsan, which were converted to 128 × 128 pixels images. A convolutional neural network (CNN) model, a deep learning model based on these images, was used to predict rice lodging, which was classified into two types (lodging and non-lodging), and the images were divided in a 8:2 ratio into a training set and a validation set. The CNN model was layered and trained using three optimizers (Adam, Rmsprop, and SGD). The area of rice lodging was evaluated for the three fields using the obtained data, with the exception of the training set and validation set. The images were combined to give composites images of the entire fields using Metashape, and these images were divided into 128 × 128 pixels. Lodging in the divided images was predicted using the trained CNN model, and the extent of lodging was calculated by multiplying the ratio of the total number of field images by the number of lodging images by the area of the entire field. The results for the training and validation sets showed that accuracy increased with a progression in learning and eventually reached a level greater than 0.919. The results obtained for each of the three fields showed high accuracy with respect to all optimizers, among which, Adam showed the highest accuracy (normalized root mean square error: 2.73%). On the basis of the findings of this study, it is anticipated that the area of lodged rice can be rapidly predicted using deep learning.

The effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns (다양한 부위에서의 감소된 두께가 지르코니아 크라운의 파절 저항에 미치는 영향)

  • Abukabbos, Layla;Park, Je Uk;Lee, Wonsup
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.60 no.2
    • /
    • pp.135-142
    • /
    • 2022
  • Purpose. This study aims to evaluate the combined effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns. Materials and methods. Seven nickel-chromium dies were generated from a 3D model of mandibular first molar using the digital scanner with the following geometries: 1.5 mm occlusal reduction, 1.0 mm deep chamfer. Based on the abutment model, Zirconia blocks (Luxen Zirconia) were selected to fabricate Sixty-three zirconia crowns with occlusal thicknesses of 0.3 mm, 0.5 mm, and 1.5 mm, and different axial thicknesses of 0.3 mm, 0.5 mm, and 1.0 mm. All crowns were cemented by resin cement. Next, the crowns were subjected to load-to-fracture test until fracture using an electronic universal testing machine. In addition, fracture patterns were observed with a scanning electron microscope (SEM). Two-way ANOVA and the Tuckey HSD test for post hoc analysis were used for statistical analysis (P < .05). Results. The mean values of fracture resistancerecorded was higher than the average biting force in the posterior region. The two-way ANOVA showed that the occlusal and axial thickness affected the fracture resistance significantly (P < .05). However, the effect of axial thickness on fracture resistance did not show a statistical difference when thicker than 0.5 mm. The observed failure modes were partial or complete fracture depending on the severity of crack propagation. Conclusion. Within the limitations of the present study, the CAD-CAM monolithic zirconia crown with extremely reduced thickness showed adequate fracture resistance to withstand occlusal load in molar regions. In addition, both occlusal and axial thickness affected the fracture resistance of the zirconia crown and showed different results as combined.