• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.610-612
• /
• 2001

본 논문은 이산 곡률을 확장된 QEM(Quadric Error Metrics)으로 변환한 새로운 메쉬 간략화 알고리즘을 제안한다. 이산 곡률이란 이산적인 표면으로 구성된 메쉬 표면의 곡률이며, 기하학 정보만을 이용하여 계산 가능하다. QEM은 간략화 오차를 평면과 한 점과의 거리 제곱의 합인 이차식으로 표현함으로써 빠른 간략화를 수행한다. 본 논문은 모서리 간략화 수행 시의 새로운 점과 주변 평면과의 거리 뿐만 아니라, 그 점에서의 이산 곡률을 계산한다. 즉, 간략화 오차에 거리와 곡률을 함께 고려하여 이차식으로 표현함으로써 빠르고 높은 품질의 간략화가 수행 가능하다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.245-254
• /
• 2000

This paper proposes a new discrete curvature error metric to generate LOD meshes. For mesh simplification, discrete curvatures are defined with geometric attributes, such as angles and areas of triangular polygonal model, and dihedral angles without any smooth approximation. They can represent characteristics of polygonal surface well. The new error metric based on them, discrete curvature error metric, increases the accuracy of simplified model by preserving the geometric information of original model and can be used as a global error metric. Also we suggest that LOD should be generated not by a simplification ratio but by an error metric. Because LOD means the degree of closeness between original and each level's simplified model. Therefore discrete curvature error metric needs relatively more computations than known other error metrics, but it can efficiently generate and control LOD meshes which preserve overall appearance of original shape and are recognizable explicitly with each level.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.288-296
• /
• 2004

This paper proposes a new mesh simplification algorithm using differential error metric. Many simplification algorithms make use of a distance error metric, but it is hard to measure an accurate geometric error for the high-curvature region even though it has a small distance error measured in distance error metric. This paper proposes a new differential error metric that results in unifying a distance metric and its first and second order differentials, which become tangent vector and curvature metric. Since discrete surfaces may be considered as piecewise linear approximation of unknown smooth surfaces, theses differentials can be estimated and we can construct new concept of differential error metric for discrete surfaces with them. For our simplification algorithm based on iterative edge collapses, this differential error metric can assign the new vertex position maintaining the geometry of an original appearance. In this paper, we clearly show that our simplified results have better quality and smaller geometry error than others.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.907-910
• /
• 1999

본 논문에서는 고 농도로 불순물이 주입된 영역에서 전자 및 정공 농도를 정교하게 구현하기 위해 Fermi-Dirac 분포함수를 고려한 포아송 방정식의 이산화 방법을 제안하였다. Fermi-Dirac 분포를 근사시키기 위해서 Least-Squares 및 점근선 근사법을 사용하였으며 Galerkin 방법을 근간으로 한 유한 요소법을 이용하여 포아송 방정식을 이산화하였다. 구현한 모델을 검증하기 위해 전력 BJT 시료를 제작하여 자체 개발된 소자 시뮬레이터인 BANDIS를 이용하여 모의 실험을 수행한 결과, 상업용 2차원 소자 시뮬레이터인 MEDICI에 비해 최대 4%이내의 상대 오차를 보였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.11a
• /
• pp.55-62
• /
• 1997

본 논문에서는 윤곽선의 다각근사화시 발생하는 오차신호를 표본화하고 표본화된 신호를 부호화하기 위한 새로운 변환을 제안한다. 제안하는 방법은 다각근사화시 발생하는 윤곽선의 단편들이 완만한 곡선의 형태를 갖고 양 끝점이 0이라는 특징을 고려해서 르장드르 다항식에 기반한 새로운 변환을 제안한다. 제안한 방법은, 기존의 방법인 이산여현변환, 이산정현변환 등과 변환부호화 이득면에서 비교해 볼 때 우수한 결과를 얻었다.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.157-160
• /
• 2001

소자 내부의 전위와 전자 및 정공 의사 페르미 준위에 따른 반송자의 정확한 농도를 얻기 위해 Fermi-Dirac통계를 구현하는 방법을 제시하였다. 또한 Fermi-Dirac통계를 고려하여 반도체 방정식을 이산화하는 방법을 제안한다. 제안된 방법을 검증하기 위해 전력 바이폴라 접합 트랜지스터를 제작하였으며 모의 실험 결과 컬렉터-에미터 전압 대 컬렉터 전류는 현재 업계에서 상용화된 소자의 실측치와 비교하여 최대 15%이내의 상대오차를 보였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.375-380
• /
• 2003

In a conventional speed sensorless stator flux-oriented (SFO) induction motor drive, when the estimated speed is transformed into the sample-data model using the first-forward difference approximation, the sampled data model has a modeling error which, in turn, produces an error in the rotor speed estimation. The error is removed by the use of a low pass filter (LPF). As a result, the delay of the estimated speed occurs in transients by the use of the LPF. This paper proposes a method to estimate exactly the speed by using Luenberger observer to solve the problem of a conventional method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.111-121
• /
• 1995

In Extracting the dynamic parameters for estimating the load carrying capacity and integrity of bridges, both the instrumentation and the processing the data plays important role . When the fixed point can not be secured, it is difficult and expensive to measure dynamic displacements. Even if the displacement is obtained through the integration of the acceleration data, the results can be quite different from the real behavior, because the main frequency contents can be leaked during discretized data processing. The instrumentation is used for measurements, and every measurement involves error and uncertainty, such as systematic, conformance, environmental, observational, sampling, and ranmom error. Systematic and conformance error can be remedied through the proper sellection and installation of the instruments, but sampling and random errors could not have been corrected properly and it becomes the limitation for using acceleration data. In this paper, the errors which can be occurred in numerical processing of dynamic data are referred, and the method to sellect proper sampling rate for the structural frequency range are proposed. Using the proposed method, the displacement response of the structures can be economically obtained from the measured acceleration record, and this procedure can be used properly to estimate the integrity of the bridges and infrastructures subjected to dynamic loads.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.95-102
• /
• 2014

This paper presents zero crossing point(ZCP) estimation methods considering discretization error for a high speed brushless DC(BLDC) motor drive. The ZCP is estimated by detecting the change of back-EMF polarity for the BLDC sensorless drive, and the discretization error exist on the estimated ZCP. The discretization error of the ZCP is a cause of the delay of a commutation timing of current and increment of a current ripple factor. Besides a delay of a ZCP estimation brings on the limitation of a speed range for the BLDC sensorless drive. The compensation method based on the error analysis with probability theory for reducing the effects of the discretization error of the ZCP is proposed. Also a ZCP estimation method according to the Back-EMF patterns is proposed to widen the speed range for the BLDC sensorless drive. The proposed methods are verified by the experiment.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.431-450
• /
• 2007

In the auto-guiding system for obtaining a long exposure astrophotography, CCD camera is usually used for measuring guide errors which are affected by optical dispersion and mechanical disturbances. In this paper, a discrete time dynamic model and a performance index are proposed for analysing the auto-guiding system. The optimal gain for proportional control is derived considering the optical dispersion and the disturbances. Some experiments are provided to illustrate that the optimal control gain is lower as the optical dispersion is higher.