• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2011

This study is aimed at suggesting a plan for creating a landscape environment by grasping a landscape preference according to the change of middle span and sag ratio which is a consideration factor when designing the suspension bridge representing long-span bridges and image property of the bridge while applying SD method to a relation between landscape preference and image factor, and a connection of design element with image factor. An analysis on landscape preference about the bridge landscape showed from what the longer the length of middle span, the extent of sag ratio of preference decreased, the longer the middle span low sag ratio was preferred and the higher the landscape preference became. In landscape preference and image factor, the attribute of sag ratio with high landscape preference was all positively correlated with "stability", "plasticity", and "aesthetic" but an influence of "plasticity" was insignificant. In the relation between design element and image factor, the factor of middle span and sag ratio was more related to the factor of "stability" and the lower the sag ratio and the longer the middle span, the higher the "stability" was rated. This result showed the image property of "plasticity" was insignificant among the one of preference in landscape and to highlight the one of "plasticity" a complementary experiment was done with a change in balance and symmetry elements not in proportional element of middle span and sag ratio. The result showed the image property of "plasticity" was more highlighted in the suspension bridge of 3-tower and different bilateral symmetry at sag, and when designing the landscape of suspension bridge later on, the elements of balance and symmetry as well as the proportional element should be considered and reflected in the design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.11b
• /
• pp.18-30
• /
• 2002

이암 및 셰일은 점토를 함유하고 있어 풍화작용을 받을 경우 공학적 성질이 급격히 변화하여 강도 저하, 내구성저하현상 및 토사와 유사한 거동을 보이는 등 토목공사에 위험한 요소가 되고 있다. 풍화된 시료엔 대한 실험용 시료 가공이 어렵고 적용 가능한 실험법이 적어 공학적 특성이나 거동을 정량적으로 파악하는 기법이 다른 암종에 비해 극히 제한된다. 현재까지 강도측정과 같은 일반적인 물성의 단순측정보다는 내구성을 분석하는 슬레이킹 내구성 시험 (Slake durability test), Modified Jar test, 팽창율 측정시험 (Swelling test) 등의 정량화 시험법이 주로 사용되고 있으며 국내 현장에서도 적용을 권장할 수 있다. 이러한 실험치의 해석에서 단일 실험치 (예: 팽창율)만으로 지질공학적 특성을 파악하는 경우 잘못된 판단을 할 수도 있으므로, X선 회절분석시험 (XRD: X-Ray Diffraction Test), TG-DTA분석, 주사전자현미경 (SEM: Scanning Electron Microscope) 이미지 분석, 투수계수 측정실험 등도 함께 수행하여 실험결과를 종합적으로 해석하는 것이 바람직하다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.6
• /
• pp.67-73
• /
• 1998

쾌적한 음환경을 창조하기 위해서는 무엇보다도 음이 갖는 심리적 속성과 인지구조 를 파악하는 것이 중요하다. 이 연구는 여러 가지 환경음중에서 유쾌음에 대한 심리적 속성, 그리고 그 속성과 음과의 관계를 정성적으로 파악하는데 목적을 두고 있다. 특히, 음에 대한 감정 및 정서표현에 사회문화적 차이가 있다는 점을 감안하여 한국어 표현어를 심층적으로 조사·분석하고, 36종류의 표현어와 34종류의 유쾌음에 대해서 평정척도법을 이용한 심리평 가 실험을 실시하였다. 실험의 분석결과, 유쾌음의 심리적 속성은 활동성, 안정성, 박력성의 3가지 요인이 중요한 요인으로 밝혀졌다. 또한, 음과 표현어사이의 관계를 파악하기 위해 다 차원척도법을 이용한 선호도분석에 의해서 3가지 요인과 음과의 관계를 파악해 보았다. 이 결과는 유쾌음에 대한 평가시 중요한 심리적 속성으로서, 음의 물리적 평가방법 및 음환경 의 쾌적성 창조를 위한 중요한 실마리를 제공해 줄 수 있을 것이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.57-64
• /
• 2022

Chloride, which is one of the main deterioration factors in reinforced concrete structures, can degrade the performance of the structure due to chloride-induced corrosion of steel. Chloride content at steel depth or the rate of chloride penetration is necessary to determine deterioration of reinforced concrete or to calculate initiation time of steel corrosion caused by chloride attack. Chlorides in concrete are generally identified with typical two methods including chloride profiling using potentiometric titration method and discoloration method using AgNO₃ solution. The former is advantageous to estimate chloride penetration rate (diffusion coefficient in general) with measured chloride contents directly, but it is laborious. In the case of latter, while the result is obtained easily with the range of discoloration, the error may occur depending on workmanship when the depth of chloride ingress is measured. This study shows that chloride penetrated depth is evaluated with the results obtained from discoloration method through image analysis, thereby the error is minimized by workmanship. In addition, the effect of micro-crack in concrete is studied on chloride penetration. In conclusion, the depth of chloride penetration was quantified with image analysis and as it was confirmed that chlorides can rapidly penetrate through micro-cracks, caution is especially required for cracks in concrete structure.

• Smart Media Journal
• /
• v.12 no.1
• /
• pp.102-111
• /
• 2023

As one of the image symbols, the second frame has rich symbolic metaphor. In previous studies, second frames are mostly presented in physical forms such as doors, windows, but in <The Power of the Dog>, there are various forms of second frames, providing more types for the study of second frames. Panofsky's Iconology has put forward a rigorous research method on how to interpret the meaning of image symbols in the picture. This study aims to use Panofsky's Iconology to analyze the second frame in <the Power of the dog>. The purpose is to expand the methodology of film image research and break through the problem that the Iconology analysis of film image stays in narrative analysis (iconographical analysis). It can be seen from the results of this study that the second frame has different visual presentation according to the requirements of narrative. In the narrative of the film, it symbolizes the depressed tone of the film and the stressful relationship between different characters. What director Campion wants to show through the second frame is that in the film industry where the problem of women is getting better, the motif of feminist film creation has changed from the expression of female appeals in binary opposition to the expression of the appeals of diverse groups in "decentralization."

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.13-22
• /
• 2008

Internal voids affecting the mechanical properties of wood composite were classified into two catagories and characteristics of voids were examined according to density variation of strandboard. The void distribution and content of strandboard according to board density were measured by X-ray computed tomography system and analized using image processing software. Prior to investigation, the densities of strandboard were measured by densitometer and the results were showed high correlation with conventional oven drying method. Based on the image analysis conducted on captured images by X-ray tomography, low resolution can be used to capture the macro-voids (between strand) but not the micro-voids (within strands). Intermediate resolution can be used to capture both the macro and the micro-voids and high resolution can be successfully used to capture the majority of the micro-voids. The content of macro-void was measured and content of micro-void was computed by corresponding related equation. The macro-void distribution can be successfully understood and void content can be correctly estimated through the results.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.542-557
• /
• 2019

The behavior of rock mass is influenced by its microscopic feature of internal structure generating from forming and metamorphic process. This study investigated a new methodology for characterization of rock based on the X-ray CT (computed tomography) images reflecting the spatial distribution characteristics of internal constituent materials. The X-ray image based analysis is capable of quantification of heterogeneity and anisotropy of rock fabric, size distribution and shape parameter analysis of rock mineral grains, fluid flow simulation based on pore geometry image and roughness evaluation of unexposed joint surface which are hardly acquired by conventional rock testing methods.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.165-172
• /
• 2020

The purpose of this study is to primarily explore the characteristics of 'irony' and focus on the process of visualizing it. 'Irony' is one of the rhetorics used to describe the context or situational aspects of writing. This 'Dépaysement' that appears in art history corresponds to 'ironic' rhetoric in writing. 'Dépaysement' is a combination of techniques, which conveys a message through de-familiarizing rhetoric. With the images conflicting with each other in logic on the same canvas. 'Dépaysement' and 'ironic' rhetoric have commonalities in that they produce a situation with opposite or contradictory images and obscure the images and the situation by distorting them into being different from what has usually been known. In conclusion, Ironic Characteristics and Visual technique elements of dépaysement are identical, this study attempts to understand the visual language by analyzing 'the visual irony' that appears in artworks.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.161-172
• /
• 2021

Neuromorphic architecture is drawing attention as a next-generation computing that supports artificial intelligence technology with low energy. However, FPGA embedded boards based on Neuromorphic architecturehave limited resources due to size and power. In this paper, we compared and evaluated the image reduction method using the interpolation method that rescales the size without considering the feature points and the DCT (Discrete Cosine Transform) method that preserves the feature points as much as possible based on energy. The scaled images were compared and analyzed for accuracy through CNN (Convolutional Neural Networks) in a PC environment and in the Nengo framework of an FPGA embedded board.. As a result of the experiment, DCT based classification showed about 1.9% higher performance than that of interpolation representation in both CNN and FPGA nengo environments. Based on the experimental results, when the DCT method is used in a limited resource environment such as an embedded board, a lot of resources are allocated to the expression of neurons used for classification, and the recognition rate is expected to increase.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.147-153
• /
• 2022

Most of the metaverse service is a gamification type of metaverse solution composed by placing 3D objects on a 360 panoramic world base. However, the metaverse webtoon service is lacking in implementation and research. In this study, a method for realizing a 2D flat image form in a 3D space and a realistic 360-degree panoramic webtoon metaverse service were studied. The research process consisted of basic storytelling and design work for webtoon production, panoramic image creation to convert the produced image into 360-degree form, and content creation process for viewing 360-degree directions. Finally, we implemented shading and material work with game engine tools so that you can enjoy virtual reality-based webtoons. The webtoon-based metaverse study studied the process of creating a 360-degree panoramic webtoon from content that can only be viewed in 2D format. Accordingly, it is thought that webtoons will also be presented as a standard for the production and implementation method for the metaverse service.