• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.140-146
• /
• 2007

To understand adhesive phenomena, we need to get force curve between two surfaces. And it is said that high stiffness force analysis system is needed to get precise force curve and more information of the surfaces. Usually the stiffness of the force measurement system is under the order of 10N/m. The stiffer force measurement system, however, results in more information on the surface, because higher stiffness lead to the wider range of force curves, secondly because the force curve obtained through the stiffer one describes more precise relationship between relative tip-sample separation and interaction force. In this paper, considering for stiffness and resolution, the cantilever was designed and we made adhesion force measurement apparatus with high stiffness and high resolution, so we measured adhesive force between Ag-ball and wafer.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1335-1347
• /
• 2006

Surface energies calculated from measured contact angles between several solutions and test samples, such as Si wafer, $Al_2O_3$, $SiO_2$, PTFE(Polytertrafluoroethylene), and DLC(Diamond Like Carbon) films, based on geometric mean method and Lewis acid base method. In order to relate roughness to adhesion force, surface roughness of test samples were scanned large area and small by AFM(Atomic Force Microscopy). Roughness was representative of test samples in large scan area and comparable with AFM tip radius in small scan area. Adhesion forces between AFM tip and test samples were matched well with order of roughness rather then surface energy. When AFM tips having different radius were used to measure adhesion force on DLCI film, sharper AFM tip was, smaller adhesion force was measured. Therefore contact area was more important factor to determine adhesion force.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1887-1889
• /
• 2001

금속 재질의 MEMS 구조물의 모양을 폴리머에 전사하는 micromolding 과정에서 금속 구조물과 폴리머 사이를 분리 (demolding)시킬 때 금속 구조물과 폴리머 기판 사이에 분리를 방해하는 응착 (Adhesion) 문제가 발생한다. 이러한 응착 문제를 줄이고자 표면 에너지가 낮은 Self-Assembled Monolayer(SAM) coating을 금속(Ni) 표면에 시도하였다. SAM coating 막의 형성 여부와 응착력 (Adhesion force) 값을 구하기 위해 각각 XPS(X-ray photoelectron spectroscopy)와 AFM(Atomic force microscopy)을 이용하여 측정하였고 측정 결과 Ni 표면에 SAM이 형성되었음을 XPS로부터 알 수 있었고 SAM coating된 Ni 시편에서 더 낮은 응착력값을 보여 주었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제27회 학술발표회 초록집
• /
• pp.182-182
• /
• 2004

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.264-271
• /
• 2015

Adhesion force of nanomaterials such as nanoparticle, nanowire, and nanorods should be significantly considered for its mechanical applications. However, examination of the adhesion force is limited since it is technically challenging to carry out experiments with such small objects. Therefore, in this work, molecular dynamics simulation (MDS) was conducted to determine the adhesion force between a nanowire and a flat surface, which could not be readily assessed through experiments. The adhesion force of a cylindrical-shaped nanowire was assessed by performing MDS and applying an equation of Van der Waals interaction. Simulation was conducted in two steps: indentation of a spherical tip on the flat surface and indentation of a cylinder on the flat surface, because the purpose of the simulation was comparing the results of the simulation and calculation of the Van der Waals interaction equation. From the simulation, Hamaker constant used for the equation of Van der Waals interaction was determined to be 2.93 °ø 10?18 J. Using this constant, the adhesion force of the nanowire on the flat surface was readily estimated by calculating Van der Waals equation to be approximately 65~89 nN with respect to the diameter of the nanowire. Moreover, the adhesion force of the nanowire was determined to be 52~77 nN from the simulation It was observed that there was a slight discrepancy (approximately 15~25%) between the results of the simulation and the theoretical calculation. Thus, it was confirmed that the calculation of Van der Waals interaction could be utilized to assess the adhesion force of the nanowire.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.189-195
• /
• 2003

Atomic Force Microscope (AFM) has been widely used in micro/nano-scale studies and applications for. the last few decade. In this work, wear characteristics of silicon-based AFM tip was investigated. AFM tip shape was observed using a high resolution SEM and the wear coefficient was approximately calculated based on Archard's wear equation. It was shown that the wear coefficient of silicon and silicon nitride were in the range of ${10}^{-1}$~${10}^{-3}$ and ${10}^{-3}$~${10}^{-4}$, respectively. Also, the effect of relative humidity and sliding distance on adhesion-induced tip wear was discussed. It was found that the tip wear has more severe for harder test materials. Finally, the probable wear mechanism was analyzed from the adhesive and abrasive interaction point of view.

• Tribology and Lubricants
• /
• 제30권1호
• /
• pp.36-45
• /
• 2014

Understanding steel/skin contact phenomena is important for the study of object manipulation in robotics and has been a topic of great interest. In this study, pig skin was taken as a surrogate model for human skin, and its adhesive, friction, and deformation behaviors were measured under various exposure times to air. Indentation, friction, and scratch tests were performed at $25^{\circ}C$ and 45% relative humidity. The influences of adhesion and deformation on the coefficient of friction were characterized; the pig skin was found to be sensitive to the sliding velocity and normal load under the controlled experimental conditions.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.244-248
• /
• 2018

We propose a method for improving the reliability of a solar cell by applying a fluorinated surface coating to protect the cell from the outdoor environment using an atmospheric pressure plasma (APP) treatment. An APP source is operated by radio frequency (RF) power, Ar gas, and $O_2gas$. APP treatment can remove organic contaminants from the surface and improve other surface properties such as the surface free energy. We determined the optimal APP parameters to maximize the surface free energy by using the dyne pen test. Then we used the scratch test in order to confirm the correlation between the APP parameters and the surface properties by measuring the surface free energy and adhesive characteristics of the coating. Consequently, an increase in the surface free energy of the cover glass caused an improvement in the adhesion between the coating layer and the cover glass. After treatment, adhesion between the coating and cover glass was improved by 35%.

• Tribology and Lubricants
• /
• 제21권1호
• /
• pp.1-7
• /
• 2005

Effect of Surface roughness on nanoscale adhesion was studied experimentally by using colloidal probe technique. Glass micro balls having the radius of $3.3\~17.4{\mu}m$ were glued at the end of AFM cantilevers to prepare colloidal probes. Adhesion force between the colloidal probe and Si-wafer was measured using pull-off force measuring method. Results showed that the measured adhesion forces are not the function of the radius of the glued balls because the ball surfaces are rough. It is also found that roughness parameters such as $R_a,\;R_q\;and\;R_{max}$ do not have important role on nanoscale adhesion. In order to find the effect of surface roughness on nanoscale adhesion, the bearing areas were extracted from the measured topography of glued balls. After normalizing the measured adhesion force with the bearing area, it was found that the normalized adhesion force kept constant as function of the radius of glued ball.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1087-1092
• /
• 2004

Adhesion and friction forces influence adversely on performance and durability of MEMS. It has been reported that the adhesion and friction forces can be reduced with the introduction of micro surface bumps into the contacting interfaces. In this study experiments were conducted to investigate comparatively the effect of hemispherical and torus micro bumps on the adhesion and friction forces. It is confirmed that micro bumps reduce the adhesion and friction forces, and their effect is more pronounced with the bumps of smaller outer boundary radius. Moreover, the results shows that the torus bumps exhibit more rapid decrease of the adhesion and friction forces with the decrease in the outer boundary radius of bump than the hemispherical bumps. When the magnitude of adhesion force is same, the torus bumps generate smaller friction force than the hemispherical bumps. The usage of hemispherical and torus bumps to reduce the adhesion and friction forces in MEMS is discussed.