• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.123-130
• /
• 2020

Prior to the introduction of automated systems such as jewelry CAD and CAM, the jewelry manufacturing industry had many originals made by hand. However, after the introduction of the automated system, original craftsmen with high technology have disappeared, and computer designers and 3D printing print engineers are taking their place. The introduction of automated systems such as CAD and CAM in the existing hand-made production line has resulted in diversification of designs and cutting-edge and specialization of jewelry manufacturing. In the domestic jewelry industry, the dependence of automation systems such as CAD and CAM in the manufacturing process continues to increase, and the situation is taking up more and more parts in the jewelry design curriculum of universities. From these results, the CAD/CAM automation system field in the jewelry manufacturing industry becomes an essential and important field in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.186-186
• /
• 2016

산업안전보건법에 따르면 결함수 분석기법(Fault Tree Analysis, FTA)은 주로, 설계 또는 운전단계에 있는 공정 위험성 평가 시 사고의 발생빈도와 예상사고 시나리오를 추정하는데 적용되어왔다. 따라서 일반적인 결함수 분석에서 정상 사상은 시스템 자체의 사용불능을 야기하는 가장 큰 원인을 의미한다. 그러나 상수도의 유지관리를 위해 FTA를 적용한 경우 정상 사상은 일반적인 FTA에서의 정상 사상과는 다르게 정의되어야 한다. 즉, 용수공급의 경우 관망 전체에 영향을 미치는 정상 사상이란 수원지의 오염이나, 수원지에서 직접적으로 나오는 관로에 문제가 생겼다거나 하는 사건을 의미하므로, 이러한 방식의 정상 사건 정의는 관망의 관로 및 절점에서 발생되는 문제를 분석하기 어렵게 만든다. 따라서 본 연구에서는 관망의 특정 지점에 용수공급이 원활하게 되지 않는 경우를 FTA의 정상사상으로 정의하였다. 또한, 개개의 관로 노후도 평가 점수와 FTA를 이용하여 관망의 특정 절점에 용수를 공급하기 위한 관로들의 노후도 평가 평균 점수를 산출하였다. 개발한 프로그램에서는 평균 노후도 평가 점수를 산출하기 위해서, 특정 절점 값을 입력 받고 각 파이프와 그로 인해 생기는 고립구간(세그먼트 + 비의도적 고립구간) 에 포함되는 절점들의 관계를 나타낸 자료를 이용하여 파이프에 문제가 생길 시 단수되는 절점을 역으로 검색해서 각 파이프의 노후도 평가 점수를 산술평균 하였다. 본 연구에서는 특정지점에 용수 공급이 원활하지 못 한 정상사상에 대하여 관로의 수리 또는 교체를 해야 하는 구간을 찾아 노후도 평가 점수를 산정하는 것이 목표이다. 이를 위해 특정 절점에 용수를 공급하기 위하여 지나가는 관로들에 대해서 평균 점수를 구함으로써, 절점에 용수가 원활히 공급 될 가능성을 산정하여 FTA와 관로 노후도 평가 점수를 이용하고 특정 절점에 용수를 공급하기 위하여 지나가는 관로들에 대해서 평균 점수를 산정하였다. 절점에서 용수를 공급하는 중요도에 따라 절점으로 이어지는 관로의 평균 노후도를 일정 점수 이하로 유지시키는 방법을 이용함으로써 관로의 유지관리 필요성에 대해 지표로써 사용할 수 있다.

• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.647-655
• /
• 2019

In order to analyze the effect of hot asymmetric rolling on the microstructure and texture of aluminum alloy and to investigate the effect of the texture on the formability and plastic anisotropy of aluminum alloy, aluminum 6061 alloy is asymmetrically rolled at room temperature, $200^{\circ}C$, $350^{\circ}C$, and $500^{\circ}C$, and the results are compared with symmetrically rolled results. In the case of asymmetric rolling, the equivalent strain (${\varepsilon}_{eq}$) is greatest in the upper roll part where the rotational speed of the roll is high and increases with increasing rolling temperature. The increase rate of the mean misorientation angle with increasing temperature is larger than that during symmetrical rolling, and dynamic recrystallization occurs the most when asymmetrical rolling is performed at $500^{\circ}C$. In the case of hot symmetric rolling, the {001}<110> rotated cube orientation mainly develops, but in the case of hot asymmetric rolling, the {111}<110> orientation develops along with the {001}<100> cube orientation. The hot asymmetric rolling improves the formability (${\bar{r}}$) of the aluminum 6061 alloy to 0.9 and reduces the plastic anisotropy (${\Delta}r$) to near zero due to the {111}<110> shear orientation that develops by asymmetric rolling.

• Journal of Broadcast Engineering
• /
• v.26 no.5
• /
• pp.543-552
• /
• 2021

The story is formed by the flow of the development and resolution of the conflict between the characters. Namely, the story consists of conflict setting, development, and resolution. Character region is an important expression technique to describe the emotions or states of characters and the relationship between characters and the environment. The purpose of this paper is to propose a method for detecting the transition of conflict from the graph of character region's change. To this end, we present a method of generating a change graph of a character region in a movie by calculating the character region and a method of detecting a conflict transition scene from a graph of character region's change. To verify the performance of the proposed method, an experiment was conducted to extract conflict transition scenes for 7 movies, and performance evaluation results of 73.57% accuracy and 77.26% recall were obtained. This proves that it is possible to extract conflict transition scenes based on the character region.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.135-141
• /
• 2021

As a trend of lightening automobiles and electronic products, several studies are currently underway to replace parts of metals with resins. In particular, heterojunctions between metals and resins are now under the spotlight. This study aims to evaluate the variation in bonding strength with process conditions when the polybutylene terephthalate (PBT) polymer is bonded to a specimen of the lightweight 6061 aluminum alloy (AL6061). Conditions of the bonding surface of the AL6061 specimen, the temperature of the injection mold, and the content of the glass fiber were considered to be process variables. Bonded specimens were manufactured for different values of these variables. Bonding strength tests were then performed on these specimens and variations were analyzed in their characteristics corresponding to those of the process conditions. Fractures in these specimens were assessed using scanning electron microscopy (SEM) to assess the fracture surface. This was then used to analyze the fracture shape and determine whether anodizing the specimen led to the development of cracks on the joint surface. Results of the above test indicated that while the surface condition of the specimen and the temperature of the injection mold significantly influenced the strength of bonding, the content of the glass fiber did not.

• Journal of Korean Society on Water Environment
• /
• v.37 no.1
• /
• pp.10-19
• /
• 2021

In the flotation process to remove microplastic (MP) particles, the attachment and separation efficiency is determined by the basic physicochemical characteristics of MP particles as well as bubbles. To evaluate the flotation characteristics of MP particles, we carried out a series of simulations using the population balance (PB) model. The initial attachment coefficient (αo) of MP particles was in the range of 0.2-0.275, and it was slightly lower than that of typical particles, such as clay, debris and algae particles, which exist in water bodies, αo, 0.3-0.4. The relative bubble number (RBN) attached to the surface of the typical number of bubbles was 0.30 and 0.32 for MP 30 ㎛ and MP 58 ㎛, respectively. In comparison, the RBN of larger MP particles (138 ㎛) was as high as 0.53. Furthermore, smaller microbubbles were required to separate properly or additional treatment needed to be applied to enhance collision and attachment efficiency since the flotation of MP particles was found to be difficult to treat as high-rate. As a result of comparing the removal rate (experimental value) of MP particles obtained from the batch-type flotation apparatus and the flotation removal rate (predicted value) of MP obtained through the PB model, the final particles by the particle size of MP overall except for the initial separation time area. With respect to the removal efficiency, the observed and predicted values were similar, and it was confirmed that the floating separation characteristics and evaluation of the MP particles through the PB model could be possible.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.417-423
• /
• 2019

A new wastewater treatment system was developed to remove nitrate nitrogen and phosphorus in synthetic wastewater through electrochemical treatment. Higher removal efficiencies of nitrate nitrogen were obtained as the current density increased. Higher nitrate removal efficiencies were obtained when the switching interval was 1 min. The total phosphorus removal rate according to the current density was found to be over 90% without being greatly affected by the change in current density and interval, and the total removal rate increased with increasing switching time (1 min interval). On the other hand, COD was not treated by electrochemical treatment, but rather increased as the electrode eluted. Also, the consumption rate of the electrode was smaller as the switching interval was shorter. Finally, removal efficiencies of 98.1% of nitrate and 90% of phosphorus were obtained through electrochemical treatment (current density $50mA/cm^2$, switching interval 1 min, flow rate 540 mL/min).

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.299-309
• /
• 2019

The purpose of this study was to look at the relationship between perpetrators and victims in Joshua Oppenheimer's Act of Killing. The theoretical tools used for this purpose were to study $Ren{\acute{e}}$ Girard's "Mimetic desire" and Hannah Arrent's "banality of evil" and to look at $Ren{\acute{e}}$ Girard's theory of "Le Bouc emissaire". The meaning of the study used the reproducible narrative of the film to challenge the reproducibility of past genocide and seek the combination of documentary and fiction as a way to show the truth. Also, the reconciliation between the assailant and the victim is meaningful in securing 'neutrality of fairness'.but they are still lacking, and more in-depth studies will need to be conducted in future further studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.9-13
• /
• 2019

In this study, a miniature thin film-patterned heater was fabricated on a silicon substrate using semiconductor process technology and the thermal characteristics of the applied voltage, power, and temperature of the thin film heater were measured and analyzed. The temperature of the thin film pattern heater increased with increasing power, but the temperature increase rate was gradual at high power intervals. The characteristics of the high temperature section of the platinum thin film-patterned heater were analyzed using the heat resistance model under atmospheric and vacuum conditions. The thermal resistance measured in a vacuum atmosphere was 0.79 [K/mW] higher than the heat resistance value 0.69 [K/mW] in air. The temperature of the thin film pattern heater can be maintained at a low power in a vacuum rather than in air, and these results are expected to be utilized in the structural design of a thin film-patterned heater element.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.317-324
• /
• 2018

This study was carried out to investigate the optimum conditions for extraction of ginsenoside active ingredients from red ginseng residue and mugwort bark extract produced by manufacturing alcoholic and water extract from red ginseng residue and mugwort bark extract. Extraction efficacy of ginsenoside active ingredients from extracted red ginseng residue and mugwort bark extract was higher than that before extracting. We suggests that red ginseng residue and mugwort bark extract produced by manufacturing alcholic and water extract of red ginseng and mugwort has higher potencies in the utilization of waste materials.