• Title/Summary/Keyword: 유효면적

Search Result 573, Processing Time 0.03 seconds

High sensitivity humidity sensors using polyimide films without fluorinated group (플루오르 그룹을 배제시킨 폴리이미드를 이용한 고감도 습도 센서)

  • Shim, Jae-Hun;Lee, Jun-Young;Kim, Jung-Hyun;Choa, Sung-Hoon;Kim, Yong-Jun
    • Proceedings of the KIEE Conference
    • /
    • 2002.07c
    • /
    • pp.1997-1999
    • /
    • 2002
  • 고분자 주쇄(Main chain)의 소수성을 가지는 플루오르 그룹을 배제시킨 습도 민감성 폴리이미드를 합성 및 이미드화 하였고, 이를 이용한 초고참도 습도 센서를 제작 및 측정하였다. 사용된 폴리이미드는 다이아민계로 Oxydianyline(ODA)와 다이안하이드라이드계로 Pyromellitic dianhydried(PMDA)를 유기용매 Dimethyla cetamide(DMAc) 하에서 폴리이미드 전구체 (Polyamic acid)를 합성하였으며, 진공 및 승온 조건에서 유기용매를 제거하여 이미드화(Imidization) 반응을 진행시켜 제조하였다. 본 습도 센서는 정전용량형 고감도 습도 센서로 디자인되었으며 실리콘 웨이퍼상에서 일반적인 반도체 공정을 이용하여 구현하였다. 본 습도 센서는 센서 크기와 유효면적, 감습층의 두께를 주요 변수로 설정하였으며 이에 따른 습도 민감성 효과를 평가 및 분석하였다. 측정 결과 유효면적 70%, 감습층 두께 $1.1{\mu}m$ 로 제작된 습도 센서는 상대숨도$20%{\sim}90%$ 영역에서 캐패시턴스와 선형적 상관관계를 보여주고 있으며, 습도 민감도는 3.9 pF/%RH 클 얻을 수 있었다.

  • PDF

기판후면 온도 모니터링 및 Fluxmeter를 이용한 CIGS 박막 제조와 고효율 태양전지로의 응용연구

  • Kim, Eun-Do;Jo, Seong-Jin
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.668-668
    • /
    • 2013
  • CIGS 박막태양전지는 다른 박막태양전지에 비해 높은 에너지 변환효율을 보이고 있으며, 광범위한 기술 응용분야를 가지고 있다. CIGS를 광흡수층으로 하는 태양전지의 구조는 5개의 단위박막(배면전극, 광흡수층, 버퍼층, 앞면 투명전극, 반사방지막)을 순차적으로 형성시켜 만든다. 단위박막별로 다양한 종류의 재료와 조성, 또한 제조방법에서는 갖가지 물리적, 화학적 박막 제조방법이 사용된다. 현재 광흡수층인 CIGS층의 경우 동시증발법과 스퍼터링법이 높은 효율을 보이고 있다. 본 연구에서는 CIGS층을 3-stage process를 적용한 동시증발법을 사용하였고, Fluxmeter와 기판후면 온도 모니터링을 이용하여 제조하였으며, 버퍼층은 moving 스퍼터링 법으로 ZnS를 증착하였고, 투명전극층은 PLD (Pulsed Laser Deposition)를 이용하여 제조하였다. 가장 높은 광변환효율을 보인 Al/ZnO/CdS/Mo/SLG박막시료는 유효면적 0.45 $cm^2$에 광변환효율 15.71%, Jsc: 33.64 mA/$cm^2$, Voc: 0.64 V, FF: 73.18%를 얻을 수 있었으며, CdS를 ZnS로 대체한 Al/ZnO/ZnS/Mo/SLG 박막시료는 유효면적 0.45 $cm^2$에 광변환효율 12.13%, Jsc: 33.22 mA/$cm^2$, Voc: 0.60 V, FF: 62.85%를 얻을 수 있었다.

  • PDF

Shaping Analysis to decide the Design Condition of a Passive-type Radar Reflector (수동형 레이더 리프렉터의 설계조건 결정을 위한 형상분석)

  • Yim, Wung-Bin;Kim, Woo-Suk
    • Journal of Navigation and Port Research
    • /
    • v.26 no.2
    • /
    • pp.199-207
    • /
    • 2002
  • Radar Cross Sections(RCS) for the radar targets are measured and their performance characteristics are analyzed through computer simulation. In addition, constructional features for the commercial radar reflectors are investigated. Then, the optimum design condition of a passive-type radar reflector was chosen. The results show that the octahedral-type radar reflector with 10$\lambda$ sized circular plates has best performance in X-band($\lambda$=3.2cm). However, to comply with newly adopted 2000 SOLAS regulations, larger sized circular plate is required to provide at both X-band and S-band.

Measurement of Effective and Total Impervious Ratio and Its Usage for Watershed Management (유효 및 총불투수율의 산정과 유역관리에서의 활용방안)

  • Choi, Ji-Yong;Koh, Eun-Ju
    • Journal of Environmental Policy
    • /
    • v.7 no.3
    • /
    • pp.121-140
    • /
    • 2008
  • The impervious cover ratio has been used as an important measure for tracing water environment characteristics in watershed. Impervious cover is divided into total impervious cover and effective impervious cover, and its size varies depending on the land use characteristics of a watershed. Total impervious cover can be easily measured using existing land use maps or land cover map, while it takes a considerable amount of time and labor to measure the effective impervious cover, as water flow should be identified at each site. This study is intended to calculate the total impervious cover and effective cover of a sample site, compare their characteristics, and find a method to apply effective and total impervious cover ratios toward watershed management. The analysis of the sample site showed that the effective impervious cover rate(39.7%) was less than the total impervious cover rate(43%). This suggests that it would be acceptable, in terms of time and cost, if total impervious cover is applied as the representative impervious cover ratio of a watershed considering that it was used as basic data to analyze the effect that impervious cover has on the water environment.

  • PDF

Appropriate Stock and Investment Estimation through International Comparison of Surface-Transportation Infrastructure Stock (육상교통 SOC 스톡의 국제비교와 목표 스톡 및 투자규모 산정)

  • Lee, Jae-Min;Sin, Hui-Cheol
    • Journal of Korean Society of Transportation
    • /
    • v.23 no.2
    • /
    • pp.83-92
    • /
    • 2005
  • We try to evaluate the stock level of Korean transportation infrastructure comparing Korean SOC stock level with those of OECD countries. In order to do so, we work on indices to show the transportation infrastructure stock levels of various countries. Among several indices, we select the effective road-extension rate per population density and the effective railroad-extension rate per population density corresponding to road and railroad. We compare Korean road and railroad stock levels with those of OECD countries, to make use of the effective road-extension rate per population density and effective railroad-extension rate per population density. We choose the Britain, Greece, Portugal, and Sweden to compare Korea because their sizes of population and territory are similar to those of Korea. Using International comparison, we arrive at the conclusion that Korean road and railroad stock levels are 63.4% and 53.2% of those of four countries respectively. In addition, we estimate the target level of road and railroad stocks and compute the target level of investments in road and railroad based on the result.

Design of single-chip NFC transceiver (단일 칩 NFC 트랜시버의 설계)

  • Cho, Jung-Hyun;Kim, Shi-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.1
    • /
    • pp.68-75
    • /
    • 2007
  • A single chip NFC transceiver supporting not only NFC active and passive mode but also 13.56MHz RFID reader and tag mode was designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply which has dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of initiator antenna. The analog front end circuit of the proposed NFC transceiver consists of a transmitter and receiver of reader/writer block supporting NFC initiator or RFID reader mode, and a tag circuit for target of passive NFC mode or RFID tag mode. The maximum baud rate of the proposed NFC device is 212kbps by using UART serial interface. The chip has been designed and fabricated using a Magnachip's $0.35{\mu}m$ double poly 4-metal CMOS process, and the effective area of the chip is 2200um by 3600um.

A Low-Noise Low Dropout Regulator in $0.18{\mu}m$ CMOS ($0.18{\mu}m$ CMOS 저 잡음 LDO 레귤레이터)

  • Han, Sang-Won;Kim, Jong-Sik;Won, Kwang-Ho;Shin, Hyun-Chol
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.6
    • /
    • pp.52-57
    • /
    • 2009
  • This paper presents a low-noise low-dropout linear regulator that is suitable for on-chip integration with RF transceiver ICs. In the bandgap reference, a stacked diode structure is adopted for saving silicon area as well as maintaining low output noise characteristic. Theoretical analysis for supporting the approach is also described. The linear regulator is fabricated in $0.18{\mu}m$ CMOS process. It operates with an input voltage range of 2.2 V - 5 V and provide the output voltage of 1.8 V and the output current up to 90 mA. The measured line and load regulation is 0.04%/V and 0.46%, respectively. The output noise voltage is measured to be 479 nV/$^\surd{Hz}$ and 186 nV/$^\surd{Hz}$ from 100 Hz and 1 kHz offset, respectively.

Development of Radar Cross Section Analysis Program for Complex Structures (복합 구조물의 레이더 반사면적 해석 프로그램 개발)

  • Kwon, Hyun-Wung;Hong, Suk-Yoon;Song, Jee-Hun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.20 no.4
    • /
    • pp.435-442
    • /
    • 2014
  • In this paper, radar cross section (RCS) analysis program, RACSAN has been developed to predict RCS of complex structures. RACSAN is based on the high frequency range analysis method of Kirchhoff approximation in physical optics (PO). This program can present RCS including multi-bounce effect in complex structures by combination of geometric optics (GO) and PO method. GO method has a concern in the evaluation of the effective area, and PO method is involved in the calculation of RCS for the final effective area that is evaluated by GO method. Comparisons of the predicted results and analytical solutions showed that the developed program could be an effective tool for predicting RCS in complex structures.

Comparative Study on Estimation of Areal Average Rainfall in Nakdong River Basin (낙동강유역 면적평균강우량 산정 기법에 대한 비교 연구)

  • Lee, Yong-Shin;Na, Yu-Jin;Bang, Jun-Se
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.948-952
    • /
    • 2009
  • 면적평균강우량을 정확하게 추정하는 것은 수문조사 결과로 생성된 수위-유량관계곡선 검증을 위한 연간 유출율 및 유황분석 시에 매우 중요하다. 면적평균강우량을 산정하는 방법은 일반적으로 산술평균법, 티센법, 등우선법 등이 있는데, 최근 실무에서는 GIS Tool을 이용하여 티센다각형을 작도하고 가중치를 산정하여 관측소별 강우량을 유효강우량으로 변환하여 이용하거나, 평지 또는 좁은 유역의 경우 산술평균법을 적용하고 있다. 그러나 티센법은 지형적인 영향을 고려할 수없고, 산술평균법의 경우 우량계 밀도와 위치, 지형이 고려되지 못한다는 단점이 있기 때문에, 등우선법을 이용하여 면적평균강우량을 산정하는 것이 대부분 산악지역으로 이루어진 국내 현실에 가장 적합하다. 본 연구에서는 수문조사가 이루어지고 있는 낙동강 본류, 댐상류 등 13개 유역의 유역별 면적 평균강우량을 각각 산술평균법, 티센법, 등우선법을 이용하여 산정하였다. 등우선도의 작성을 위하여 관측소별 강우량을 역거리가중법(IDW), RBF, Kriging 기법을 이용하여 강우량의 공간보간을 실시하였으며, 등우선 간격의 영향을 검증하기 위하여 각 보간법 별 등우선 간격을 10mm, 50mm, 100mm로 분할하여 면적평균강우량을 산정하였다. 각 면적평균강우량 산정기법 및 등우선 간격별로 산정된 면적평균강우량을 비교하였고, 유역면적 등에 따른 면적평균강우량의 변화특성을 분석 하였다.

  • PDF

Physical characteristics of agricultural reservoir in korea (국내 농업용 저수지의 물리적 특성)

  • Choi, Sunhwa;Lee, Jinkyung;Ye, Hanhee
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.544-544
    • /
    • 2015
  • 국내에는 17,500여개의 농업용 저수지가 전국적으로 분포하고 있으며, 이들 저수지는 인공호소이다. 농업용 저수지의 총 유효저수량은 2,838백만$m^3$에 달하고 있으며, 전체 수리답의 약 76%에 해당하는 593천ha의 농경지에 물을 관개하고 있다(2013농업생산기반통계연보). 최근 농어촌지역의 도농복합형태 개발 및 관광지, 유원지화로 농업용 저수지 유역의 오염원이 지속적으로 증가하는 추세에 있으며, 이로 인해 농업용수 수질이 지속적으로 악화되고 있다. 특히, 늦봄에서 초가을까지 외기온도 상승 및 저수율 저하와 함께 부영양화 증가, 녹조 대발생 등으로 수질오염도가 급상승하고 있으며, 이로 인해 호 내 물고기 폐사, 악취발생 등으로 민원이 다수 발생하고 있다. 본 연구에서는 농업용 저수지의 물리적 특성을 분석하여 농업용 저수지 수질개선을 위한 기초자료로 활용하고자 하였다. 농업용 저수지 17,489개소를 수혜면적별로 분류해 보면 5ha이하가 7,808개소(44.7%), 5~10ha이하 4,277개소(24.5%), 10~20ha 2,772개소(15.9%), 20~30ha 797개소(4.6%), 30~40ha 385개소(2.2%), 40~50ha 238개소(1.4%), 50ha이상 1,201개소(6.9%)로 구성되어 있어 50ha이하가 전체의 93.1%에 이르고 있다. 유효저수량별 분포현황은 10천$m^3$이하가 7,996개소(45.7%), 10~50천$m^3$ 6,420개소(36.7%), 50~100천$m^3$ 1,003개소(5.7%), 100~300천$m^3$ 868개소(5.0%)로 전체 시설 중 50천$m^3$이하가 전체 저수지의 82.4%로 대부분이 소규모 저수지임을 알 수 있다. 농업용 저수지를 유효수심별로 구분해보면 1m이하가 전체의 26.6%, 3m이하가 전체의 77.1%, 5m이하가 전체의 91.1%로 국내 대부분의 저수지들은 수심이 5m 이하의 저류지 형태의 저수지임을 알 수 있다. 저수지를 유역배율(유역면적/만수면적)에 따라 구분해보면 유역배율 3이하가 전체의 1.2%이고, 5이상이 전체의 97.4%를 차지하고 있다. 일반적으로 유역배율이 3이상이면 부영양화에 취약한 호소로 분류되고 있다. 국내 농업용 저수지는 대부분이 수심이 낮고, 유효저수량이 소규모이며, 유역배율이 3이상인 호소가 대부분으로 태생적으로 수질오염 및 부영양화에 취약한 구조로 되어 있음을 알 수 있다. 농업용 저수지 수질개선을 위한 종합계획 수립시에는 유입수 및 호내 대책과 함께 호소의 물리적 조건을 개선시키는 방안에 대해서도 검토가 요구된다. 특히 저수지 신규 설치시에는 수량관리 뿐만 아니라 수질도 함께 고려된 물리적 인자에 대한 설계가 이루어져야 할 것으로 판단된다.

  • PDF