• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.108-114
• /
• 2017

We have experimentally analyzed the self-radiation impedance of an ultrasonic transducer with a square radiation surface that is used as a vibrator in underwater ultrasonic detection systems. The radiation reactance and the radiation resistance were measured in the range from 1 to 3 of ka that is the product of a wave number and a length of the edge of the square vibrator. By comparing the measured results with those of theoretical calculation of the radiation impedance using a series, we confirmed the validity of the experimental method and experimentally confirmed the variation trend in the radiation impedance of the square radiation surface.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.1
• /
• pp.87-96
• /
• 2013

This study investigated characteristics of buckling load and effective buckling length by member rigidity of dome-typed space frame which was sensitive to initial conditions. A critical point and a buckling load were computed by analyzing the eigenvalues and determinants of the tangential stiffness matrix. The hexagonal pyramid model and star dome were selected for the case study in order to examine the nodal buckling and member buckling in accordance with member rigidity. From the numerical results, an effective buckling length factor of adopted models was bigger than that of Euler buckling for the case of fixed boundary. These numerical models indicated that the influence of nodal buckling was greater than that of member buckling as member rigidity was higher. Besides, there was a tendency that the bifurcation appeared on the equilibrium path before limit point in the member buckling model.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.1
• /
• pp.139-146
• /
• 2010

It was verified that the effect of the distance between current input point and output point on direct current potential drop (DCPD) in the material with two-dimensional surface notch. If the distance between potential drop measuring points was fixed at a certain distance, the potential drop was decreased with increasing the distance between current input and output points. DCPD technique was a useful method for surface crack sizing because the potential drop was proportional to the length of notch. In this paper, we suggest a statistical model to describe the data and want to find a significant variables to effect to potential drop. We use R program to analyze the data.

• Water for future
• /
• v.26 no.4
• /
• pp.97-105
• /
• 1993

This paper presents the results of a study conducted to improve the understanding of the characteristics of cylindrical capsule flow in a pipeline by taking into account of the effect of capsule density uniformity. The effect of capsule density variation in the axial direction was studied both experimentally and anaytically. The experiments were conducted in a 190mm diameter straight pipe 17m long. The velocity, gap and tilt of capsules were measured under various conditions, In order to interpret the data on various capsule density conditions, the stability index given in the dimensionless number was introduced. The motion of capsules in pipelines is strongly affected by the stability of the capsules characterized by the stability index. The experiments conducted prover that the stability index is a valid criterion for explaining and correlating data on the capsule motion and the capsule density uniformity.

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.3
• /
• pp.9-16
• /
• 2004

가상환경의 표현 정보가 의미있는 데이터로서 사용되게 하기 위해서는 지구상 모든 물체를 유일하게 정의하고 표현할 수 있는 데이터 구성 체계가 요구된다. 이를 위해서는 화면에 표현할 물체의 속성 정보가 표준화된 기술 방법에 따라서 표현되어야 한다. 이것은 가상환경 정보가 실세계 정보처리 분야에서 의미있는 데이터로서 유효하게 사용되도록 하기 위해서 모든 물체에 대한 고유한 물리적 정보 기술 방법이 고려되어야 함을 의미한다. 여기에는 물체 표현에 필요한 외관에 관한 정보 뿐 아니라 물체의 내부 표현을 포함하여 물체의 기능 및 성능 표현, 길이 및 무게, 지리적 위치 등의 속성 정보까지 모두 표현되고 관리될 수 있어야 한다. 본 논문에서는 이와 같은 속성 기술 방법을 위해서 lSO/IEC JTC1 SC24 WG8에서 표준화작업을 진행하고 있는 SEDRIS를 이용하여 물체의 모습과 속성을 표현하는 데이터구조를 가시화하고 이 데이터구조에 따라 물체의 모습을 렌더링하고 조작하는 가상환경 표현 인터페이스 구현에 대해 설명한다.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1273-1283
• /
• 2012

In this paper, vision-based positioning algorithm for melon harvesting robot is presented. RGB value of the input image was converted into HSI value then, melon area was extracted after performing the binarization using HUE value. After morphological filtering was applied to remove noise, outermost boundary points were obtained using border following and convex hull method. Elliptical fitting for melons was perform by the RANSAC algorithm, the center point of ellipse, the length of the short and long axis, and rotation angle were obtained. We verified the effectiveness of the proposed method by various simulation experiments and confirmed actual feasibility of the proposed method by applying to the real melon.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.258-265
• /
• 2002

In this paper, we design single and symmetrical double lenses with DOE. The specifications are the following : Image area is 4.8 mm $\times$ 3.6 mm, F/# is 2.8 and the overall length (from first lens surface to image plane) is 6.8mm. After comparing the optical performance and characteristic values, we determine that symmetrical double lenses are superior to single lenses. Symmetrical double lenses have the merits of fewer zones, weaker flare, and smaller distortion than single lenses.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.175-180
• /
• 1998

Nd:YAG single crystal widely used as solid state laser was grown by Czochralski method. <111> single crystal with 0.9at% of $Nd^{3+}$ was grown from the Czochralski furnace with a automatic diameter control system. The vertical temperature gradient in the liquid was the major factor that influence the crystal quality, and the crystal diameter was controlled by the home made computer program. The crystal boule with $\phi$50mm$\times$ι100mm effective size was cut, polished, and antireflection coated. The optical evaluation such as absorption spectrum, fluorescence spectrum coincide with typical features of Nd:YAG single crystal. The laser rod was assembled into the CW laser generator with a Kr lamp. The maximum CW laser output was 70 W and the threshold power and efficiency was 1.3kW and 1.64% respectively.

• Spatial Information Research
• /
• v.11 no.4
• /
• pp.421-437
• /
• 2003

In order to calculate the position of parcel boundary points, the area of the Parcel, and the length of the parcel boundary lines using a digitalized cadastral map or maps, the distortion of the map has to be corrected. The correction methods, such as the method of 2D affine transformation using 4 comer points of the edge lines, the method of tessellation into 9 subregions, the method of using the original surveying sheets, and the method of straightening the 4 edge lines, have been developed. In this Paper, the four methods were programed and applied to some sample cadastral maps and the correction accuracies were obtained and analysed. No method could prefectly correct the distortions because the distortions were irregular throughout the maps. However, it is found that tile method of straightening the 4 edge lines is the one which can minimize the distortions when the method is applied after applying the 2D projective transformation on the maps using the 4 comer points of the edges.

• Phonetics and Speech Sciences
• /
• v.9 no.1
• /
• pp.41-47
• /
• 2017

The main advantage of the statistical parametric speech synthesis is its flexibility in changing voice characteristics. A personalized text-to-speech(TTS) system can be implemented by combining a speech synthesis system and a voice transformation system, and it is widely used in many application areas. It is known that the fundamental frequency and the spectral envelope of speech signal can be independently modified to convert the voice characteristics. Also it is important to maintain naturalness of the transformed speech. In this paper, a speech synthesis system based on Hidden Markov Model(HMM-based speech synthesis, HTS) using the STRAIGHT vocoder is constructed and voice transformation is conducted by modifying the fundamental frequency and spectral envelope. The fundamental frequency is transformed in a scaling method, and the spectral envelope is transformed through frequency warping method to control the speaker's vocal tract length. In particular, this study proposes a voice transformation method using the correlation between fundamental frequency and vocal tract length. Subjective evaluations were conducted to assess preference and mean opinion scores(MOS) for naturalness of synthetic speech. Experimental results showed that the proposed voice transformation method achieved higher preference than baseline systems while maintaining the naturalness of the speech quality.