• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.95-98
• /
• 2007

In this paper, we make an analysis of electromagnetic wave absorption properties of $TiO_2$ in W-band. Therefore, we fabricated some samples in different composition ratio of $TiO_2$ and CPE. And the material properties of samples are calculated from S-parameter of samples using $\ell-2\ell$ method. We analyze absorption properties and complex relative permittivitis of samples. As a result, it has verified that absorption properties of sample containing $TiO_2:CPE=70:30wt.%$ have been excelled in W-band.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3022-3024
• /
• 2005

연성 PCB(flexible printed circuit board)는 현재 노트북 PC와 디지털 카메라등에 적용되며, 굴곡성이 강하고 소형화 및 조립에 용이하여 주로 기판 사이나주기판과 외부 커넥터사이에 데이터의 전송매체로써 널리 사용되는 핵심부품이다. 근래에 개발되는 PCB 기반의 고성능 신호처리회로들은 데이터 전송율이 수백 MHz에서 수 GHz에 이르고 있으며, 신호선과 유전체, 접지판의 구조적 특성에 따라서, 반사 효과와 같은 신호무결성 문제들이 파생되어 신호의 최대성능을 제한하게된다. 이에 따라 적절한 임피던스 제어를 통하여 고성능신호들의 왜곡을 상쇄시키는 기술이 중요하게 되었다. 본 논문에서는 연성 PCB 전송라인을 위한 임피던스 모델을 대상으로 각 모델의 주요 특징 및 정확성을 분석하였다. 연성 PCB의 전송라인은 보통 전통적인 마이크로스트립 라인의 특성 임피던스 모델에 비해 신호선의 너비가 크며, 이를 반영한 개선된 수학적 임피던스 모델들이 제안되어 있다. 따라서 본 논문은 기존의 마이크로스트립 전송라인과 연성 PCB 전송라인에 적합한 수학적 모델들을 이용하여 신호 무결성 문제를 모의할 수 있는 CAE(computer-aided engineering) 도구의 임피던스 측정 결과를 비교 및 분석하였다.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.540-546
• /
• 2010

This study was conducted to understand the role of soybean pathogenesis-related 10 (GmPR10) gene in salt tolerance and to develop salt-tolerant rice using GmPR10 cDNA. GmPR10 transgene was expressed constitutively in the shoot and root of the $T_1$ transgenic rice plants. Interestingly, however, the levels of the transgene expression were increased temporally up to over four- to five-fold in the shoot and root by 125 mM NaCl treatment, peaking at six hours after the treatment and decreasing thereafter. Electrolyte leakage of leaf cells under 125 mM NaCl treatment was lower in all the transgenic lines than in the control variety, Dongjin-byeo. Ability of seedlings to recover from 125 mM NaCl treatment for two weeks was higher in the transgenic plants than in the control plants. These results demonstrated that GmPR10 had function to increase cell integrity and promote growth under the saline stress imposed by NaCl. The transgenic line GmPR10-3 which showed highest ability to recover from the saline stress could be used as a potential source for salt tolerance in rice breeding programs.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.108-109
• /
• 2002

Optical tweezers는 광압(radiation pressure)을 사용하여 입자들을 포획하거나 조절할 수 있다는 점에서 마이크로스케일의 유전체구뿐만 아니라 세포에서도 널리 사용되고 있다. 일반적으로 빛이라는 것은 광자들의 집합체로서 광자의 입자성으로 인하여 외부의 물체와 충돌시 운동량을 전달하게 되고 이것을 광압(radiation pressure)이라고 하며 optical tweezers [1]는 이 광압을 이용한 방법중 하나이다. 레이저빔을 입자에 집속 시켜 주게 되면 입자는 광압에 의해서 gradient force와 scattering force의 힘을 받게 된다. (중략)

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.10a
• /
• pp.140-140
• /
• 2017

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2001.05a
• /
• pp.246-247
• /
• 2001

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.04a
• /
• pp.117-117
• /
• 2022

• Korean Journal of Materials Research
• /
• v.10 no.5
• /
• pp.375-381
• /
• 2000

Aluminium foil for electrolytic capacitors was anodized at the voltage of 100V and 140V for 10 minutes in ammonium adipate solution to form aluminum oxide layer on aluminum substrate as an dielectric film. The thickness, the stoichiometry and the crystal structure of the layer were investigated by using RBS and TEM . In addition EIS technique was employed to study the effects of addition of sulfuric acid on the increment of the foil surface area. It was found that the thickness values of the layers anodized at 100V and 140V were about 130 nm and 190 nm respectively and the stoichiometry of the elements of aluminum and oxygen was 2:3. The anodic oxide layer was shown to be amorphous. but the structure irradiated with electron beam resulted in the transformation into crystalline structure of $${\gamma}$-Al_2$$O_3$ . From a comparison of the impedance results and the capacitance variation to investigate the ef- fects of sulfuric acid addition to the etching bath of hydrochloric acid, the EIS techinque could be useful to analyze the capacitance variation.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.339-345
• /
• 2014

For enhancing productivity of glulam, high frequency (HF) curing technique was researched in this study. Heat energy is generated by electromagnetic energy dissipation when HF wave is applied to a dielectric material. Because both lamina and adhesives have dielectric property, internal heat generation would be occurred when HF wave is applied to glulam. Most room temperature setting adhesives such as phenol-resorcinol-formaldehyde (PRF) resin, which is popularly used for manufacturing glulam, can be cured more quickly as temperature of adhesives increases. In this study, dielectric properties of larch wood and PRF adhesives were experimentally evaluated, and the mechanism of HF heating, which induced the fast curing of glue layer in glulam, was theoretically analyzed. Result of our experiments showed relative loss factor of PRF resin, which leads temperature increase, was higher than that of larch wood. Also, it showed density and specific heat of PRF, which are resistance factors of temperature increase, were higher than those of wood. It was expected that the heat generation in PRF resin by HF heating would occur greater than in larch wood, because the ratio of relative loss factor to density and specific heat of PRF resin was greater than that of larch wood. Through theoretical approach with the experimental results, the relative strengths of ISM band HF electric fields to achieve a target heating rate were estimated.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.2
• /
• pp.124-130
• /
• 2013

The significance of environment change and genetic safety has been recently recognized by many genetically modified (GM) plants. This study was to evaluate the safety of drought-tolerant rice and to identify the environment variance. The GM rice of drought-tolerant rice and four check cultivars were analyzed the data on agronomic characters and principal component in large-GM crop field. There was no significant difference in agronomic characters between the drought-tolerant rice and donor plant, 'Ilmi'. Grain yield showed the standard deviation of the difference, did not significant statistically. Related to grain characters, grain appearance were similar to the drought-tolerant rice and donor plant, 'Ilmi'. In Chemical characters, brown rice of the drought-tolerant rice and a donor plant, 'Ilmi' did difference in starch and protein, however, was similar as 'Ilpum'. These results indicated that drought-tolerant rice may perform to detect genetic safety in GM plants progeny.