• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.755-762
• /
• 2000

In this work, we present the resonant frequencies, Qrad, and impedance bandwidth of rectangular dielectric resonator antenna(DRA)for a broad range of aspect ratios using Dielectric Waveguide Model. These presented data are compared with simulation and measurement. The DRA having relative permittivities of 37.84 and 90 have been fed by a coaxial cable and fed using a aperture-coupled method for comparisions. The approximate resonant frequencies are shown to have the prediction error of about 8% and impedance bandwidth is found to have large prediction variation according to feeding method. The data presented in this paper can be used when the aspect ratios of DRA have to be determined for a given resonant frequency and impedance bandwidth.

• Korean Journal of Plant Taxonomy
• /
• v.47 no.2
• /
• pp.161-169
• /
• 2017

The genome size is one of the basic characters of an organism, and it is widely applied in various fields of biology, such as systematics, breeding biology, population biology, and evolutionary biology. This factor was recently highlighted in genome studies because choosing a representative of a plant group having the smallest genome size is important for the efficiency of a genome project. For the estimation of the genome size, flow cytometry has recently been highlighted because it is a convenient, fast, and reliable method. In this study, we report the genome sizes of 15 taxa of Lamiaceae from nine genera distributed in Korea using flow cytometry. Data pertaining to the genome size for all of our species have not been reported thus far, and the data from Agastache, Clinopodium, Elsholtzia, and Isodon are the first reported for each genus. The genome sizes of 15 genera and 39 species were reported to the Plant DNA C-values Database (http://data.kew.org/cvalues/). Scutellaria indica L. has a genome size of 0.37 pg (1C). This is the fourth smallest value among the 98 Lamiaceae taxa in the Angiosperm DNA C-value Database, indicating that this taxon can be used as a reference species in the genome studies in Lamiaceae as a native Korean species. The largest genome size observed in this study is in Phlomis umbrosa Turcz. (1C=2.60 pg), representing the possible polyploidy origin of this species in the family.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.12-20
• /
• 2016

Advances in DNA sequencing technologies have contributed to revolutionary understanding of many fundamental biological processes. With unprecedented cost-effective and high-throughput sequencing, a single laboratory can afford to de novo sequence the whole genome for species of interest. In addition, population genetic studies have been remarkably accelerated by numerous molecular markers identified from unbiased genome-wide sequences of population samples. As sequencing technologies have evolved very rapidly, acquiring appropriate individual plants or populations is a major bottleneck in plant research considering the complex nature of plant genome, such as heterozygosity, repetitiveness, and polyploidy. This challenge could be overcome by the old but effective method known as haploid induction. Haploid plants containing half of their sporophytic chromosomes can be rapidly generated mainly by culturing gametophytic cells such as ovules or pollens. Subsequent chromosome doubling in haploid plants can generate stable doubled haploid (DH) with perfect homozygosity. Here, classical methodology to generate and identify haploid plants or DH are summarized. In addition, haploid induction by epigenetic regulation of centromeric histone is explained. Furthermore, the utilization of haploid plant in the genomics era is discussed in the aspect of genome sequencing project and population genetic studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.645-648
• /
• 2008

In this paper, we analyze inner- and far-field emitted field pattern by more exactly calculating modes formed from a finite periodic dielectric structure(FPDS). It is assumed that TE-modes are generated in FPDS, and the fields in each layer are determined by proper boundary conditions. Consequently, the fields generate modes in the FPDS and the number of modes depends on its structural characteristics. In this work, the modes betwween dielectric layers and their field patterns are calculated in a specific frequency. In addition. far field patterns are given by using FFT of the calculated modes.

• KOGO NEWS
• /
• v.10 no.2
• /
• pp.15-16
• /
• 2010

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.59-61
• /
• 2014

유전체 연구를 위한 분석 작업은 표준유전체에 시퀀스 데이터를 정렬하는 과정을 필수적으로 요구한다. 정렬에는 single-end 또는 paired-end reads가 사용된다. Paired-end reads는 유전체 조각의 양쪽에서 시퀀싱 된 데이터로 좀 더 긴 길이에 대한 정보를 얻을 수 있어 많이 이용된다. 정렬 툴 자체적으로 paired-end reads를 다룰수 있으나, 병합툴을 활용하는 것이 더 좋은 결과를 보인다. 다섯 가지 병합툴 중에서 CASPER와 pear에서 정렬 이득이 가장 크게 나타난다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.408-414
• /
• 2005

The VCDRO(Voltage Controlled Dielectric Resonate. Oscillator) with low phase noise is designed using nonlinear analysis, and its phase noise characteristics are compared with that of Lesson's equation. The microstripline coupled with dielectric resonator is realized as a high impedance inverter to improve the phase noise performance, and the quality factor of resonator circuit can be transferred to active device with the enhanced the loaded quality factor. The worst case and part stress analyses are achieved to obtain the high reliability of VCDRO and the reliability analysis is accomplished to estimate the probability of operation at the end of life. The developed VCDRO has the oscillating tuning factor of 0.56MHZ1V for the control voltage range of 0-l2V. This VCDRO requires the DC power of 136mW. The phase noise characteristics exhibit good performances of -94.18dBc/Hz (a)10KHz and -116.3dBc/Hz (a)100KHz. And, the output power over 7.33dBm is measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.311-311
• /
• 2010

Aerosol deposition method(ADM)은 상온에서 에어로졸화 된 고상의 원료분말을 노즐을 통해 분사시켜 소결과정을 거치지 않고도 상온에서 고밀도 후막을 제조할 수 있는 공정이다. 이러한 Aerosol deposition method의 장점은 상온에서 고밀도 후막을 제조할 수 있고, 다양한 재료의 코팅이 가능하며, 코팅층의 조성 및 화학 양론비의 제어가 용이하다. 본 연구에서는 많은 장점을 가지고 있는 Aerosol deposition method를 이용하여 높은 유전상수, 압전계수, 초전계수를 갖는 $BaTiO_3$ 분말을 원료로 하여 압전소자, 커패시터, 고전압용 유전체 등에 응용이 가능한 유전체 형성에 관한 연구를 진행하였다. 또한 $BaTiO_3$ 같은 강유전체 세라믹을 이용하여 여러 가지 소자를 제조하는 경우 소자의 미세조직에 따라 물성이 영향을 받는 것으로 확인되어져 있다. 이에 본 연구에서는 세라믹 분말보다 상대적으로 탄성이 큰 polymer 분말 중 높은 유전율을 갖고 압전특성이 있는 Polyvinyl difluoride(PVDF)를 선정하여 $BaTiO_3$ 분말에 첨가하여 동시분사법을 사용해 복합체 후막을 성장시켰고, 또한 금속 분말을 첨가하여 동시분사법을 사용해 복합체 후막을 성장시켰다. 성장된 복합체 후막은 유전율과 유전손실 그리고 leakage current, breakdown voltage, 미세구조 분석 등 다양한 분석이 이루어 졌으며, embedded capacitor 유전체 층으로 응용 가능성을 가늠하였고, 상온에서 제조된 유전체 층의 응용을 위한 최적의 공정조건을 제시하고자 한다.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.329-337
• /
• 2015

All known genomes (N=10) in the order Nitrosomonadales were analyzed to contain 9,808 and 908 gene clusters in their pan-genome and core genome, respectively. Analyses with reference genomes belonging to other orders in Betaproteobacteria revealed that sizes of pan-genome and core genome were dependent on the number of genomes compared and the differences of genomes within a group. The sizes of pan-genomes of the genera Nitrosomonas and Nitrosospira were 7,180 and 4,586 and core genomes, 1,092 and 1,600, respectively, which implied that similarity of genomes in Nitrosospira were higher than Nitrosomonas. The genomes of Nitrosomonas contributed mostly to the size of the pan-genome and core genomes of Nitrosomonadales. COG analysis of gene clusters showed that the J (translation, ribosomal structure and biogenesis) category occupied the biggest proportions (9.7-21.0%) among COG categories in core genomes and its proportion increased in the group which genetic distances among members were high. The unclassified category (-) occupied very high proportions (34-51%) in pan-genomes. Ninety seven gene clusters existed only in Nitrosomonadales and not in reference genomes. The gene clusters contained ammonia monooxygenase (amoA and amoB) and -related genes (amoE and amoD) which were typical genes characterizing the order Nitrosomonadales while they contained significant amount (16-45%) of unclassified genes. Thus, these exclusively-conserved gene clusters might play an important role to reveal genetic specificity of the order Nitrosomonadales.

• Korean journal of applied entomology
• /
• v.61 no.3
• /
• pp.449-460
• /
• 2022

The morphology and whole genome sequence of Spodoptera exigua nucleopolyhedrovirus K1 (SeNPV-K1) isolated in Korea were analyzed for the use as an eco-friendly control source against S. exigua. The polyhedra of SeNPV-K1 was amorphous with a size of 0.6-1.8 ㎛, and there was no external difference with the previously reported SeNPV. As a result of analyzing the nucleotide sequence of the whole genome, it was composed of 135,756 bp, which is 145 bp more than that of the previously reported SeNPV. The G+CG+C content was 44% and there were 6 homologous repeated sequences, so there was no significant difference from the previous report. As a result of ORF analysis, SeNPV-K1 had 137, two fewer than those previously reported, and 4 ORFs present only in SeNPV-K1 were confirmed. These 4 ORFs are non-essential genes and were not considered to have a significant influence on the characteristics of the SeNPV. The genome vista analysis showed that the overall sequence similarity between SeNPV-K1 and the previously reported SeNPV was very high. The whole genome of SeNPV-K1 analyzed for the first time in Korea was found to be similar to the previously reported SeNPV, but it was confirmed that it was a novel resource in Korea with different isolate.