• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.8-13
• /
• 1993

This paper presents deterministic and adaptive control laws for two-link flexible arm. The flexible arm has considerable structural flexibility. Because of its flexbility, dynamic equations are very complex and difficult to get, dynamic equations for two-link flexible arm are derived from Bernoulli-Euler beam theory and Lagrangian equation. Using the fact that matrix is skew symmetric, controllers which have a simplified structure with less computational burden are proposed by using Lyapunov stability theory.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.547-551
• /
• 1996

In this paper, robust vibration control of a one-link flexible robot arm based on variable structure system is discussed. We derive dynamic equations of it using a Lagrangian assumed modes method based on Bernoulli-Euler Beam theory. The optimal sliding surface is designed and the problem of chattering is also solved by the adoption of a continuous control law within a small neighborhood of the switching hyperplane.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.106-111
• /
• 1992

The flexible arm has considerable structural flexibility. Because of its flexibility, the dynamic nodel is very complex and difficult to get. In this paper, fuzzy logic controller(FLC) of the single-link flexible arm is proposed, for FLC does not require any mathematical model of the plant. Noncolocated control is used and the choice of linguistic variables are examined. The simulation results are presented to show the possibility of FLC for flexible arm.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1128-1130
• /
• 1996

A canonical form observer design method for nonlinear systems is studied. Through this method, an observer of single link robot system with flexible joint is proposed. It is shown through simulation that the system can be stabilized when using the nonlinear feedback linearizing controller and the supposed observer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.183-193
• /
• 1994

The dynamic equation of a flexible robot manipulator is formulated by the assumed-mode method and the Lagrange equation. The controller is designed for a flexible robot manipulator including a joint actuator. The controller consists of a parmaeter estimator and the adaptive controller. A parameter estimator evaluates ARMA model`s parameter using RLS algorithm. An adaptive controller is designed based on a reference model and a minimum prediction error controller.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.187-196
• /
• 1996

A new control strategy to actively control the vibration of a very flexible single link manipulator is proposed and experimentally realized. The control scheme consists of two actuators; a motor mounted at the beam hub and a piezoceramic bonded to the surface of the flexible link. The control torque of the motor to produce a desired angular motion is firstly determined by employing a sliding mode control theory on the equivalent rigid dynamics. The torque is then applied to the flexible manipulator in order to activate the commanded motion. During the motion, underirable oscillation is actively suppressed by applying a feedback control voltage to the piezoceramic actuator. Consequently, the desired tip position is favorably accomplished without vibration. Measured control responses are presented in order to demonstrate the efficiency of the proposed control methodology.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.254-259
• /
• 1992

In this paper, we propose an optimal method for the tracking a trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint equations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation of flexible planner manipulator is presented.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.1
• /
• pp.58-66
• /
• 1992

This paper proposes a neuro-controller for position control of one-link flexible robot arm. Basically the controller consists of a multi-layer neural network and a conventional PD controller. Two controller are parallelly connected. Neural network is traind by the conventional error back propagation learning rules. During learning period, the weights of neural network are adjusted to minimize the position error between the desired hub angle and the actual one. Finally the effectiveness of the proposed approach will be demonstrated by computer simulation.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.291-292
• /
• 2018

이 연구의 목적은 대상자의 팔과 다리를 연구자가 잡아당기고, 저항을 준 상태로 대상자가 대상자의 몸통으로 가져가는 수동적 가동범위의 운동인 '저항굴곡MS운동'이 코어를 강화시켜주는 운동임을 증명한다. 또한 본 연구의 목적은 누군가의 작은 도움이 근육강화와 유연성은 물론 관절의 기능회복에 도움을 주며 류마티스 관절염 통증완화에 미치는 영향을 알아보고자하는데 있다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.36-44
• /
• 1993

In the development of a high speed and light weight manipulator, it is necessary to consider the flexibility of a robotic arm. The infinite dynamics must be analyzed to obtain the finite mode modeling to achieve the feasible controller design of the robotic arm. The modeling procedures of the flexible robot arm, and natural frequencies and mode shapes by the constrained and unconstrained mode method are illustrated. The transfer function of the robot arm with a payload is also shown. The controller is designed by the pole assignment and optimal control theory to compensate for the unmodelled dynamic effects to the low order system. Also, the pole assignment method involving the harmonic vibration mode is presented through computer simulation.