• Journal of Aquaculture
• /
• v.9 no.3
• /
• pp.195-203
• /
• 1996

Six strains (OKK, MOK, CHA, WON, 505 & PUA) of Korean rotifer, Brachionus plicatilis (S-type) were isolated from salt pond, and the resting egg production of these strains was investigated with the different salinities (10, 20, 30 put), Rotifer were cultured at $28^{\circ}C$ and 2,000 lux in 20 ml test tube with feeding Nannoohloris oculata. The maximum rotifer density was 2,050 inds./ml at 10 ppt for OKK strain, and MOK strain showed the highest specific growth rate (1.028) at 10 ppt. Mixis rate of CHA and WON strains increased with the lower salinity, while MOK strain increased the rate with salinity. PUA strain did not show the mixis rate even at the high rotifer density, and OKK strain showed the very low mixis rate ranging from 1.1 to $3.0\%$. Fertilization rate of CHA, MOK, SOS and WON strains was ranged from 10.4 to $68.8\%$, and OKK strain did not showed any fertilization rate. The highest production of resting egg in 20 ml test tube was 4,065 eggs at 10 ppt for WON strain. The results may suggest that the selection of rotifer strain and salinity are important factors for the mass production of resting egg.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.389-401
• /
• 2007

The oxygen and hydrogen isotopic composition in precipitation, groundwater and geothermal water were monitored over four-year period from 2001 to 2004 at the Yuseong catchment, Daejeon. By analyzing the long term rainfall pattern, we found out the drought cycle of 6 or 7 year. We fortunately revealed that the oxygen and hydrogen isotopic composition of rain has progressively changed to heavier isotopic ratios from 2001 to 2004. The weighted mean values of ${\delta}^{18}O\;and\;{\delta}D$ of rain are calculated to be $-7.7%o\;and\;-51%o$, respectively. These isotopic values are much heavier than those of groundwater and geothermal water collected at the same period, which indicates that the rain or snow of the study area would not immediately affect the isotopic composition of groundwater or geothermal water. Comparing with the previous data, the groundwater and geothermal water collected at 1990 and 1992 year has the heaviest isotopic composition and afterwards their isotopic composition has been progressively shifted to the direction of lighter composition field.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.99-114
• /
• 2004

Mineralogical characteristics of fracture-filling minerals from deep borehole in the Yuseong area were studied for the radioactive waste disposal project. There are many fracture zones in the deep drill holes of the Yuseong granite, which was locally affected by the hydrothermal alteration. According to the results of hole rock analysis of drill core samples, $SiO_2$ contents are distinctly decreased, whereas $Al_2$$O_3$ and CaO contents and L.O.I. values are increased in the -90 m∼-130 m and -230 m∼-250 m zone, which is related to the formations of filling minerals. Fracture-filling minerals mainly consist of zeolite minerals (laumontite and heulandite), calcite, illite ($2M_1$ and 1Md polytypes), chlorite, epidote and kaolinite. The relative frequency of occurrence among the fracture-filling minerals is calcite zeolite mineral > illite > epidote chlorite kaolinite. Judging from the SEM observation and EPMA analysis, there is no systematic change in the texture and chemical composition of the fracture-filling minerals with depth. In the study area, low temperature hydrothermal alteration was overlapped with water-rock interactions for a long geological time through the fracture zone developed in the granite body. Therefore the further study on the origin and paragenesis of the fracture-filling minerals are required.

• The korean journal of orthodontics
• /
• v.37 no.5
• /
• pp.351-363
• /
• 2007

The aim of this study was to evaluate pulp and periodontal changes following rapid tooth retraction by periodontal distraction after bone undermining surgery in young adult dogs. Methods: Alter extraction of second premolars, the interseptal bone mesial to the upper 3rd premolar was undermined. After activating the distraction appliance at 0.5 mm/day for six days, the dogs were sacrificed at 0, 1, 3, 5, 7, and 9 weeks during the consolidation period. Tissue changes of periodontium and pulp were evaluated radiologically, histologically, and immunohistochemically. Results: Digital subtraction radiography showed active bone formation in the stretched periodontal ligament from 0 - 4 weeks. Resorption of the alveolar bone, appearance of osteoclasts, and infiltration of inflammatory cells were observed just after the activation period at the pressure side, and distinctive bone formation was seen in the tension side of the periodontal ligament from 1 week. New bone formation was active at 1 - 3 weeks. The expression of calcitonin gene-related peptide in the experimental group was increased at the alveolar bone and pulp, and periodontal ligament at the pressure side from 0 - 1 week, and it decreased after 5 weeks to become similar to that of the control group. Conclusions: The results showed that rapid tooth movement using periodontal distraction can be new form of orthodontic tooth movement for accelerating normal bone formation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.914-919
• /
• 2004

When the motor is rotating, the torque and rpm are varying as the loads or the driving status connecting through reduction units are changing. On the contrary, one can monitor the changes of the loads or the driving status in the manner of measuring motor torque and rpm. There is a torque measuring method using the strain gauge and bridge circuit. But, because this is the contact method, it has the life time which is dependent on rotating velocity and used time. So this system demands on replacement of some Parts or whole system itself for maintenance. And this system is also relatively big and expensive, requiring preceding annoying process. In this paper, we are going to suppose non-contact method to measure torque and rpm using the Hall effects sensor For this we have made the planetary geared reduction motor with Hall sensors and with the monitoring system. The monitoring system displays the sensing data(torque, rpm) and calculated data( power) and also has the network capability with Bluetooth protocol. Our solution is much more inexpensive ;md simple method to measure torque and rpm than before.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.419-429
• /
• 1998

This study was carried out in order to study early histologic changes and repair reaction appling to extrusive force for 3rd premolar of adult dogs. After 1 week of extrusive force with elastic chain, one of dogs was sacrified and after 3 weeks retention period, another dog was sacrified. The paraffin sections of samples were stained with Hematoxylin - Eosin and Masson's Trichrome and were examed by light microscopy . The obtained results as follows 1. In Hematoxylin - Eosin and Masson Trichrome stain of control group , the periodontal ligament width was constant from apical third to cervical third of the root and periodontal fiber arrangement was horizontal or oblique in cervical third. oblique in middle third, oblique in apical third of root. in alveolar bone, smooth appearance was shown 2. In Group 1, all periodontal fiber arrangement was oblique toward tooth, and the periodontal ligament width increased Partially PDL was ruptured in apex. In MT stain, immature bone formation was seen at alveolar crest area. Active bone formation was observed along the one side of alveolus, and apical portion of pulp was involved with blood vessel rupture , vacuolization of pulp tissue and hyperemia 3. In Group 2, most periodontal ligament arrangement and PDL width was repaired and fiber density increased. In MT stain, mineralization of immature bone on the alveolar crest was progressed. In pulp, vacuole and hyperemia was diminished and fibrotic change was diminished 4. After 3 week periodontal ligament has more repair ability than pulp tissue. pulp was involved with vacuolization and fibrosis, so it takes more time for repair.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.915-922
• /
• 2017

The study on the thermal and oil resistance rubber composite, 2016. [6] predicted the lifetime of Fluorocarbon Rubber by accelerating aging at high temperature ($150^{\circ}C$, $175^{\circ}C$, $200^{\circ}C$). general rubber products are likely to exhibit different properties depending on the degradation factors such as temperature, humidity, ozone, light, emulsion, mechanical and electrical stress. To solve these problems, We compared the rate of change about tensile strength, elongation rate, volume change rate, weight change rate, thickness change rate, thermal conductivity in low temperature promoting aging on the basis of predictive lifetime of high temperature promoting aging. As a result of the review, the required life expectancy was satisfied, but there was a slight difference in the rate of change between the high-temperature promoted aging life result and the low temperature promoted aging life result. The cause was a reduction in "tensile strength / elongation" and an increase in "volume / weight / thickness" caused by the main chain decomposition of fluorine rubber due to aging at high temperature promoting aging. However, the low temperature promoting aging was caused by the curing reaction of fluorine rubber at $80^{\circ}C$. The tensile strength / elongation and volume / weight / thickness changes were small.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.113-121
• /
• 2012

A total of 150,624 records of Holstein milk production collected from 2005 to 2009 were analyzed to investigate the effects of two different contemporary group definitions, parity and somatic cell score (SCS). The first definition (H BY S) of contemporary group was milking cows and heifers born in the same year and season. And the second thing (H CY S) was milking cow and heifers that delivered calves in the same year and season. Effects of contemporary group, parity and regression effect on SCS from two models were highly significant sources of variation. Coverage of variation ($R^2$) was somewhat higher in models with H BY S as contemporary group. From multivariate models with H BY S, phenotypic correlation coefficients of milk components were estimated high and positive. However, the phenotypic correlation coefficient between milk yield and SCS was -0.09, which was low enough to evidence no correlation between them. Phenotypic correlation between SCS and butter fat or between SCS and protein were also negligible but negative. From multivariate models with H CY S as contemporary group, phenotypic correlation among milk traits and SCS were similar to the estimates from models with H BY S. However, SCS in these models were lowly but negatively correlated with milk yield, milk protein, butter fat or SNF, and the phenotypic correlation coefficients of which were -0.10, -0.08, -0.08, -0.11, respectively.

• Phonetics and Speech Sciences
• /
• v.13 no.3
• /
• pp.53-64
• /
• 2021

It is known that the voicing contrast for Japanese word-initial stops is primarily realized as differences in the voice onset time (VOT). However, recent studies have reported that voiced stops are more often produced with a positive VOT than with a negative VOT among the younger generation nationwide. It is also known that post-stop F0 is associated with the stop contrast, but the degree of F0 use differs from region to region. This study explores whether the difference in post-stop F0 functions as a perceptual cue to the stop contrast along with VOT. Fifty-five college students who are native listeners from four different regions participated in two or three perception tests. The results show that VOT is a primary cue to the voiced-voiceless distinction of word-initial stops, but that the effect of post-stop F0 on the stop contrast is marginal. The post-stop F0 is involved in perception only when VOT is ambiguous, such that a sound with high F0 is more often perceived as a voiceless stop, but not vice versa. The results of this study indicate that the acoustic parameters associated with the stop contrast are not the same in production and perception, and suggest that other factors such as context, which is not an acoustic characteristic, may also be involved in the stop contrast.

• Resources Recycling
• /
• v.32 no.3
• /
• pp.18-25
• /
• 2023

Sericite was ground with or without additives (LiNO₃ or TiO₂) using a planetary mill. The resultant ground products included the average particle size of 2-3 ㎛ (sericite only or sericite+LiNO₃) and 0.5-0.6 ㎛ (sericite+TiO₂) were obtained within 10 minutes of grinding time. respectively. In the grinding of the sericite without any addictive, the particle size initially decreased, but, as grinding time elapsed thereafter, agglomerates were formed and D50 increased over 10 ㎛. In contrast, when the additive was added, the particle size decreased as the grinding time elapsed and any aggregation was relatively not noticeable, compared with the grinding of the sericite only. As a result of measuring the zeta potential for the raw or the ground samples, variation of the zeta potential values according to pH at the early stage of the grinding with the addictives was gentler than that at the final stage of grinding, which showed the relatively similar trend to the pH-zeta potential correlation in grinding of raw sericite. In addition, as a result of the disintegration experiment through ultrasonic excitation, D50 decreased rapidly only until the disintegration time of about 50 minutes.