• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.4
• /
• pp.99-111
• /
• 2015

The objectives of this study were to investigate the location, shape, environment, and vegetation of the Village Forest in Gyeonggi-do and to evaluate the ecological integration and changes of the Village Forests to figure out the measures for conservation and management. There were 23 Village Forests remain in Gyeonggi-do. Ten Village Forests were established based on Feng-shui background. Many of them were found in Yongin area and southeast of Icheon. The Village Forests were owned by local community at 9 village and privately owned at 8 villages. Most Village Forests were managed by local communities except for the two managed by private person. Fifty-two percent of the Village Forests were in strip shape, and most of them were established by Feng-shui background or for the prevention of disasters. The average size of the Village Forests was relatively small at 3,046m2. The most frequent tree species found at the Village Forest were Zelkova serrata and Pinus densiflora. Over half of the number of Village Forests showed vertical structure of overstory trees only or overstory-sub overstory combination, which seemed to be resulted from the loss of understory plants by the activities of local residents. The Village Forests that had over 30% of damaged trees were found at 7 villages. The damages were caused by the road construction close to the groves, soil compaction, and tree death by covering lower stem with soil. The vitality of the damaged trees seemed to be significantly low compared to that of the undamaged. There were factors that determined the changes in the Village Forests: community ritual, institutional protection, designation as a water resource protection district, road construction, land use change, windstorm hazards, and development of forest areas. In order to conserve and manage the Village Forests appropriately, it is necessary to limit excessive use of the grove areas and maintain proper tree growing conditions by improving the soil environment. The development of neighborhood areas need to be controlled and community activities should be encouraged to maintain or restore the original landscape of the groves. Protection measures and supporting policies need to be enforced to keep the Village Forests from disappearing in near future.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.375-381
• /
• 2005

Er:YAG laser has been considered a promising alternative to dental drill and many researches indicate that adjustment to variable parameters, including water flow rate, pulse energy and pulse repetition rate, can be made to improve ablation ability and efficiency of the laser. Of these parameters, addition of water spray during irradiation has been thought to ablate dental hard tissue more rapidly and safely. The purpose of this study was to investigate tooth ablation amount by Er:YAG laser irradiation as related to varied water flow rates added and, ultimately to find the most effective water flow rate for ablation. In addition, the temperature change of pulp chamber during irradiation was also monitored on the irradiated and opposite pulpal walls, respectively. An Er:YAG laser with contact mode was employed. Extracted human molars were split into two pieces for ablation experiment. Pulse energies of 200 and 300 mJ with a pulse repetition rate of 20 Hz and 5 water flow rates (1.6, 3.0, 5.0, 7.0, and 10.0 ml/min) were applied. Each irradiation was performed for 3 seconds. According to these parameters, experimental groups were divided into 10 subgroups which consisted of 5 specimens. For temperature experiment, another 5 tooth-specimens were prepared in the manner that pulp chamber was open through access cavity preparation and two temperature-measuring probes were placed respectively on the irradiated and the opposite walls of pulp chamber. From the experiment on ablation amount related to different water flow rates, it was shown that the least water flow rate of 1.6 ml/min ablated more than any other water flow rates (p<0.000). When the irradiation for 3 seconds, combined with the pulse repetition time of 20Hz and the water flow rate of 1.6 ml/min was done to tooth specimen, the temperature rise was not noticeable both on the irradiated and the opposite pulpal walls (less than 3$^{\circ}C$) and there was no significant difference in temperature rise between the two pulse energies, 200 and 300 mJ. From the results of this study, it is suggested that tooth ablation with Er:YAG laser can be done effectively and safely at a energy between 200 and 300 mJ/pulse and a pulse repetition rate of 20 Hz when the lasing is conjugated with the water flow rate of 1.6ml/min.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.28-33
• /
• 2016

Batteries are used for main power engine in the fields such as mobiles, electric vehicles and unmanned submarines, for starter and lamp driver in general automotive, for emergency electric source in ship. These days, lead-acid and the lithium ion batteries are increasingly used in the fields of the secondary battery, and the lead-acid battery has a low price and safety comparatively, The lithium ion battery has a high energy density, excellent output characteristics and long life, whereas it has the risk of explosion by reacting with moisture in the air. But Recently, due to the development of waterproof, fireproof, dustproof technology, lithium batteries are widely used, particularly, because their usages are getting wider enough to be used as a power source for hybrid ship and electric propulsion ship, it is necessary to manage more strictly. Hybrid ship has power supply units connected to the packets to produce more than 500kWh large power source, and therefore, A number of the communication modules and wires need to implement the wire inspection and monitor system(WIIMS) that allows monitoring server to transmit detecting voltage, current and temperature data, which is required for the management of the batteries. This paper implements a low price type wireless inspection and monitoring system(WILIMS) of the lithium ion battery for hybrid vessels using BLE wireless communication modules and power line modem( PLM), which have the advantages of low price, no electric lines compared to serial communication inspection systems(SCIS). There are state of charge(SOC), state of health(SOH) in inspection parts of batteries, and proposed system will be able to prevent safety accidents because it allows us to predict life time and make a preventive maintenance by checking them at regular intervals.

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1313-1319
• /
• 2016

Cancer is a complex disease heterogeneously composed of various types of cells including cancer stem-like cells responsible for relapse and chemoresistance in the tumor microenvironment. The conventional two-dimensional cell culture-based platform has critical limitations for representing the heterogeneity of cancer cells in the three-dimensional tumor niche in vivo. To overcome this insufficiency, three-dimensional cell culture methods in a scaffold-dependent or -free physical environment have been developed. In this study, we improved and simplified the HCT-8 colon cancer cell-based spheroid culture protocol and evaluated the relationship between cancer stemness and responses of chemosensitivity to 5- Fluorouracil (5-FU), a representative anticancer agent against colon cancer. Supplementation with defined growth factors in the medium and the culture dish of the regular surface with low attachment were required for the formation of constant-sized spheroids containing $CD44^+$ and $CD133^+$ colon cancer stem cells. The chemo-sensitivities of $CD44^+$ cancer stem cells in the spheroids were much lower than those of $CD44^-$ non-stem-like cancer cells, indicating that the chemoresistance to 5-FU is due to the stemness of colon cancer cells. Taken together, the inflammation and oncogenic gut environment-sensitive HCT-8 cell-based colon cancer spheroid culture and comparative evaluation using the simplified model would be an efficient and applicable way to estimate colon cancer stemness and pharmaceutical response to anticancer drugs in the realistic tumor niche.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.21-36
• /
• 2005

Although the main geology of Korea consists of granite and gneiss, it Is not uncommon to encounter anisotropy Phenomena in crosshole radar tomography even when the basement is crystalline rock. To solve the anisotropy Problem, we have developed and continuously upgraded an anisotropic inversion algorithm assuming a heterogeneous elliptic anisotropy to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. In this paper, we discuss the developed algorithm and introduce some case histories on the application of anisotropic radar tomography in Korea. The first two case histories were conducted for the construction of infrastructure, and their main objective was to locate cavities in limestone. The last two were performed In a granite and gneiss area. The anisotropy in the granite area was caused by fine fissures aligned in the same direction, while that in the gneiss and limestone area by the alignment of the constituent minerals. Through these case histories we showed that the anisotropic characteristic itself gives us additional important information for understanding the internal status of basement rock. In particular, the anisotropy ratio defined by the normalized difference between maximum and minimum velocities as well as the direction of maximum velocity are helpful to interpret the borehole radar tomogram.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.5
• /
• pp.44-58
• /
• 2018

Cities face new challenges not only in natural disasters by climate change but also in social and economic fluctuations. With the existing simple reconstruction method, it is difficult to solve the overall problems that a city or region may face. As a new approach to cope with various changes, the concept of resilience is emerging. Resilience is also one of the themes of recent major urban design projects. Design with the concept of resilience is a new strategy that can deal with various changes of urban space, rather than a temporary trend. The purpose of this paper is to explore the design method by analyzing cases where the concept of resilience is employed. We aim to examine what kind of design strategies are needed for the resilience design and how this design process differ in character, as compared to general design projects. Cases for this study include the "Rebuild by Design" competition held in 2013 and the "Resilient by Design/Bay Area Challenge" competition held in 2017. This paper consists of literature reviews and case studies. The latter is divided into two aspects: content analysis based on the theory of resilience and characteristics of the design process. Cases are analyzed through literature reviews and process characteristics of resilience design in response to the general design process. The main categories for urban resilience used as the framework for analysis include: Urban Infrastructure, Social Dynamics, Economic Dynamics, Health and Wellbeing, Governance Networks, and Planning and Institutions. As a result, the aspects of resilience concepts considered and design strategies undertaken by each team were identified. Each team tried to connect all 6 categories to their design strategies, placing special value on the role of governance, a system that enables collaborative design and project persistency. In terms of the design process, the following characteristics were found: planning the whole project process in the pre-project phase, analyzing predictable socioeconomic risk factors in addition to physical vulnerabilities, aiming for landscape-oriented integrated design, and sustainable implementation strategies with specific operations and budget plans. This paper is meaningful to connect the concept of resilience, which has been discussed in various articles, to design strategy, and to explore the possibility of constructing a practical methodology by deriving the characteristics of the resilience design process. It remains a future task to research design strategies that apply the concept of resilience to various types of urban spaces, in addition to areas that are vulnerable to disasters.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.115-128
• /
• 2002

Dislike the tangent sections, the horizontal curve sections of roads should be designed, considering several factors : one of such factors is widening. In other words, since widening results from that when a vehicle runs on the horizontal curve sections, the rear wheels of the vehicle run not along with tracks of the front wheels but out of that, such offtracking should be exactly investigated and reflected in design of the curve sections. Especially in the case of industrial roads which semi-trailers and large trucks run frequently or arterial roads with small curve radiuses in mountainous regions. serious offtracking Phenomenons result in increasing the risk of accidents. decreasing the capacities and jeopardizing pedestrians' safety on the curve sections. For the offtracking, widening amounts of roads has been determined under the traditional presumption that vehicles run at a low speed and there is no superelevation. In fact, however, since the vehicles run at a high speed as well as at a low speed and the superelevation is installed on the horizontal curve sections in the structural aspect of roads, the existing standards for installing widening have a limitation to reflect exactly actual Phenomenons. In particular, for articulated wheel axles of a tractor and a trailer and long articulated vehicles, not only the offtracking degree is very high but also the interpretation shows different aspects from one of single axles. Comparing and reviewing the results of Korean and foreign studies related to the trailer offtracking model theory and the standards for installing widening, this study developed a realistic dynamic offtracking model which considers geometric structures of roads and speeds of vehicles, suggested how to measure widening with this model and examined applicability of the model. The findings of this study are as follows ; First. a dynamic offtracking model. which considers dynamic movements of a tractor and a trailer and the superelevation, was developed. Second, a new method to measure widening with the developed dynamic offtracking model was developed and a method to measure widening with swept path width was suggested as well. Finally, validity of the current standards for installing widening was examined by determining actual offtracking and widening amounts with the developed model and the applicability was investigated through the case studies. Compared with the existing offtracking models, the dynamic offtracking model developed in this study can reflect practically vehicle speed. dimension and geometric structural aspects of roads. In conclusion, the meaning of this study is that it reviews validity of the current standards for installing widening and provides a base to establish such standards by suggesting new methods to measure the widening with this dynamic offtracking model.

• Korean Journal of Psychosomatic Medicine
• /
• v.7 no.1
• /
• pp.61-71
• /
• 1999

Objective : The purpose of this study was to assess the relationship between the premenstrual changes and stress perception in women with premenstrual changes($PMC^+$)(n=32) and those without premenstrual changes($PMC^-$)(n=62) by using prospective method. Method : The women who were older than 30 years of age and healthy were asked to complete a daily rating form based on DSM-IV diagnostic criteria for one menstrual cycle to assess the changes of psychological and physical symptoms across the menstrual cycle. They also completed 5-point likert scale to assess the perception of stress. Percent changes method was used to assess changes between follicular phase and luteal phase. Results : 1) No significant differences were found in demographic factors(age, education, marriage, employment) and risk factors(onset ages of menarche, regularities of premenstrual changes, duration of menstruation, cycle length, amount of menstruation, dysmenorrhea) between women with and without premenstrual changes. 2) There was a significant difference in mean luteal phase stress score between women with($1.92\pm0.63$) and without premenstrual changes($1.51\pm0.42$)(p<0.05). However no difference was found in mean follicular phase stress score between two groups($PMC^+$ : $1.67\pm0.43$, $PMC^-$ : $1.33\pm0.39$). 3) We divided women having premenstrual changes into two groups, higher stress group(stress score > 1.75(median)) and the lower stress group(stress score <1.75(median)). The higher stress group reported more luteal psychological symptoms than did the lower stress group(df=1, F=13.362, p<0.001). However, the groups did not differ in physical symptoms. Conclusion : In women with premenstrual changes, luteal stress score was higher than follicular stress score and this result suggested tha the perception of stress was related to psychological symptoms but not physical symptoms. These findings suggested that premenstrual change is associated with the stress level, and that it is important to manage the stress which is focused on the management of psychological symptom in the treamtment of prementrual syndrome.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.343-349
• /
• 2013

Data including 1,372,050 milk records pertaining to 438,019 cows from 1983 to 2011 collected during performance tests conducted by the National Livestock Cooperative Dairy Improvement Center were used to calculate milk income and profit of individuals and investigate the effects of production levels of early lactation (parity 1 and 2, respectively). Individuals with a moderate level of early lactation stayed longer in herds. Among parity 1, the 9,000 kg or higher group had a lower mean number of lactations than the overall mean of 3.13. The 7,000 kg or lower and 10,000 kg or higher groups had lower mean life time milking days than the overall mean of 1,076.8 days. Standard deviations of lifetime traits tended to decrease as production levels increased. For parity 2, the 11,000 kg or higher group had a lower mean number of lactation than the overall mean of 3.43. The lifetime milking days was highest in the 12,000 kg group (1,212.0 days), and generally smaller in the lower groups. Profit increased as the production level of groups increased for both parity 1 and 2. In groups with low production levels, profit of parity 1 was higher than that of parity 2, while the reverse was true in groups with high production levels. These results suggest that individuals in the low production groups had a greater likelihood to be culled due to reproductive or other problems. Furthermore, the accuracy of the prediction of lifetime profit of individuals with a milk yield of 305 days seems to be higher for parity 2 than parity 1; therefore, it is desirable to predict lifetime profit using the 305d milk yield of parity 2. In conclusion, breeding goals are based on many factors in functions for the estimation of profit; however, production levels during early lactation (parity 1 and 2) can be used as indicators of profit to extend profitability.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.2
• /
• pp.79-84
• /
• 2010

Purpose: In patients with meniscal tear with degenerative arthritis, controversy remains as to whether arthroscopic menisectomy is worthwhile or not. The purpose of this study was to evaluate the effect of arthroscopic medial meniscectomy in degenerative arthritis of the knee with meniscal tear. We also intended to identify pertinent indications and risk factors. Materials and Methods: 287 patients underwent arthroscopic medial meniscectomy from 2006 to 2008; 103 patients who had Kellgren-Lawrence grade II, III arthritis of the knee, were over 50 years old, and had minimum 1 year follow-up, were analyzed in this study. Clinical assessment was performed retrospectively using the arthroscopic surgery database, medical records, questionnires and interviews. Assessment included visual analogue scale (VAS) scores and Lysholm scores. Results: The mean Lysholm score increased from 69 to 85 after surgery. The mean VAS score improved from 7 to 3.1 after surgery. Kellgren-Lawrence grade II group and group with trauma history showed significant improvement of pain and function compared with grade III and group without trauma history. Outerbridge grade I showed significantly more improvement of pain than grade III and IV. Multiple regression analysis showed that trauma history and Outerbridge grade affect the improvement of Lysholm score. Conclusion: In one year follow-up, arthroscopic medial menisectomy can improve pain and function of patients in Kellgren-Lawrence grade II, III degenerative arthritis of the knee. We could expect good results especially in group with low Kellgren-Lawrence grade, trauma history, and mild articular cartilage lesion.