• 제목/요약/키워드: 위험물질 확산

Search Result 61, Processing Time 0.141 seconds

Numerical Study of Evaporation and Ignition of in-line Array Liquid Droplets (액적 배열의 증발과 착화에 관한 수치해석적 연구)

  • 김충익;송기훈
    • Fire Science and Engineering
    • /
    • v.13 no.1
    • /
    • pp.37-47
    • /
    • 1999
  • The spreading fire of very small floating particles after they are ignited is fast and t therefore dangerous. The research on this area has been limited to experiments and global simulations which treat them as dusts or gaseous fuel with certain concentration well m mixed with air. This research attempted micro-scale analysis of ignition of those particles modeling them as liquid droplets. For the beginning, the in-line array of fuel droplets is modeled by two-dimensional, unsteady conservation equations for mass, momentum, energy and species transport in the gas phase and an unsteady energy equation in the liquid phase. They are solved numerically in a generalized non-orthogonal coordinate. The single step chemical reaction with reaction rate controlled by Arrhenius’ law is assumed to a assess chemical reaction numerically. The calculated results show the variation of temperature and the concentration profile with time during evaporation and ignition process. Surrounding oxygen starts to mix with evaporating fuel vapor from the droplet. When the ignition condition is met, the exothermic reactions of the premixed gas initiate a and burn intensely. The maximum temperature position gradually approaches the droplet surface and maximum temperature increases rapidly following the ignition. The fuel and oxygen concentration distributions have minimum points near the peak temperature position. Therefore the moment of ignition seems to have a premixed-flame aspect. After this very short transient period minimum points are observed in the oxygen and fuel d distributions and the diffusion flame is established. The distance between droplets is an important parameter. Starting from far-away apart, when the distance between droplets decreases, the ignition-delay time decreases meaning faster ignition. When they are close and after the ignition, the maximum temperature moves away from the center line of the in-line array. It means that the oxygen at the center line is consumed rapidly and further supply is blocked by the flame. The study helped the understanding of the ignition of d droplet array and opened the possibility of further research.

  • PDF

Environmental Economic Inducement Policies Affecting the Impacts of Environmental Management for Enterprises (기업의 환경경영에 영향을 미치는 환경경제 유인정책)

  • Kim Dong-Hwan
    • Proceedings of the KAIS Fall Conference
    • /
    • 2004.06a
    • /
    • pp.324-326
    • /
    • 2004
  • 20세기 말까지만 해도 경제발전은 자원고갈과 자연환경파괴를 통한 대량생산 및 대량소비를 전제로 하여 이루어 졌다고 평가할 수 있다. 그 결과 세계의 자연환경은 급속히 훼손되었으며, 환경오염은 이제 인류의 생존을 위협하는 단계에 이르렀다. 이 같은 위기상황에 대처하기 위하여 지난 1980년대부터 선진국을 중심으로 환경경영에 대한 인식이 확산되기 시작하였다. 무엇보다도 자연환경 의 보존을 요구하는 사회적 압력은 기업으로 하여금 환경경영 의 필요성을 깨닫게 하였다. 환경 경영이란 기업들이 새로운 비교 우위를 창출하기 위하여 경 영 방식의 혁신에 있어서 자연환경을 초점으로 삼는 것이다. 환경경영이란 환경보전을 요구하는 이해 관계자들로부터의 요구에 기업이 이에 적극적으로 대응함으로써 한경보호와 경영성과를 동시에 달성하는 종합적인 경영을 의미한다. 환경경영은 이업의 전 활동에 걸친 전사적인 전략적 차원의 활동으로 기업경영이 어느 한 기능분야에 국한된 개념이 아니다. 궁극적으로 환경보호와 성장의 조화라는 기업의 목표달성을 위해 기업의 생산, 재무, 인사조직, 마케팅, 회계정보시스템등의 활동이 모두 통합되어야 할 것이다. (김종대, 이의훈:2003) 최근 들어 환경경영이 기업의 가치에 미치는 영향에 대한 연구가 활발히 전개되고 있는 가운데 선진국의 경우 기업의 가치가 대체적으로 정확하게 주가에 반영되고 있는 가운데 선진국의 경우 기업의 가치가 대체적으로 정확하게 주가에 반영되고 있어 우리기업들이게 시사하는 바가 크다 하겠다. 환경경영과 기업가치와의 상관관계를 조사한 연구결과에 따르면 우수한 환경경영을 실천하고 있는 기업의 주식을 중심으로 포트폴리오를 구성한 펀드의 수익율이 상대적으로 높게 나타나고 있어 환경경영의 중요성을 뒷받침하고 있다. 이를 위하여 본 논문은 우선적으로 기업의 환경경영에 기본이 되는 중요한 환경경제 유인정 책과 규제들을 중심으로 살펴보고자 하였다.학적 합성이 아주 까다로운 약제물질 등을 천연상태에서 합성하고 있기 때문이다. 또 식물은 lipoxygenase 효소계가 있어서 마치 천연물 석유제조공장과 같은 제조공정 capacity를 가지고 있다. 그러면 식물/식품 GMO는 안전한 것인가? 아니, KBS의 한 사회자가 말했듯이, 그리고 많은 소비자들이 믿는 것처럼 GMO는 위험한가? GMO에 대한 일반 사람들의 공포감은 Green Peace 당원들뿐만 아니라 일부 과학자들에 의해서도 조장되고 있다. 이러한 분위기 속에서 GMO에 의한 제2 녹색혁명은 Africa 대륙에서의 제1 녹색혁명이 지금도 지연되는 것과 같다고도 볼 수 있다. GMO의 환경에 대한 악영향은 과대 선전되어있는 것이 아닌가? 마치 GMO가 화학비료, 농약제보다 더 위험하다고 믿는 사람들도 많다. 나는 이러한 GMO 공포증이 과학적으로 그리고 "Risk Assessment"의 견지에서 볼 때 그 근거가 희박하다고 보여주는 몇 몇 실험 및 경험 사실들을 인용하려 한다. 그리고 올바른 Risk Assessment야 말로 한국의 21세기 BT 산업을 경쟁력 있게 하고 국민 년 소득 2만불 달성에 중요한 기여를 하게 될 것이라고 생각한다. 한국은 농토가 적고 천연자원이 빈약하다. GMO는 21세기의 생존 경쟁 산업이다. 제2의 녹색혁명은 얼마든지 가능하며, 한국은 부족한 농토와 빈약한 자원에도 불구하고 능력 있는 인적자원이 풍부하여 GMO 개발 연구에 국제적 경쟁력을 키울 수 있다. 그러나 GMO에 대한 논쟁만 하고 있으면 이미 때가 늦는다. 미국은 이미 GMO-BT 시장을 거의 완전 독점했으며, 타국에서의 논쟁과 불합리적으로 엄격한 GMO 관련 규정을 조장하고 환영한다.이상의 결과와 같이 인삼 saponin 성분들은 arachidonic acid로부터 cyclooxygenase를 통해 일단 생성된 endoperoxide에서 각각의 prostagland

  • PDF

교실은 어떻게 '스마트'해지는가?

  • JEONG, Hanbyul
    • Journal of Science and Technology Studies
    • /
    • v.19 no.3
    • /
    • pp.201-246
    • /
    • 2019
  • Information technology is sometimes considered as a cause that puts education in a big crisis, or it can be seen as a savior. In 2011, the Korean government announced that it would innovate education and build a talented nation by bringing IT into schools of public education system through the SMART education policy. The policy initiative aimed to establish a standard classroom models that can be diffused all over the country's schools so that teachers and students may become familiar of using devices such as tablet PCs and laptops. This paper analyzes how the smart classrooms caused friction in the actual education practices. To this end, I analyzed the direction and ideals of the SMART education policy by reading government policy document and design guidelines officially published, and visited three elementary schools that are actually building and operating a smart classroom environment to visit the facilities and have in-depth interviews with teachers and technicians. The ideal type of classroom proposed by the smart education policy was a package equipped with various functions at once in a neatly designed space like a "model house", but it was difficult to be used as a normal classroom in everyday life of school. Instead of copying and installing the model, each school decided to get "smart" in its own way, depending on how factors such as size, local characteristics, socioeconomic conditions of students and teachers, teacher experiences, and the level of existing infrastructure were combined. In Elementary School A, the machines tamed specific space of the school to create their own space, while following the rules of the school for being mobile. Although Elementary School B could not construct fully supported environment that encompassed the entire school, the system was organized with the help of well trained teacher's experiences in other schools. In Elementary School C, the machines are concentrated on specific classrooms and they promote teacher's professionalism. The components of the smart classroom were disassembled and recombined in context to make each school's classroom "smart".

A Numerical Study on Ventilation Characteristics of Factors Affecting Leakages in Hydrogen Ventilation (누출 수소 환기에 영향을 미치는 요인별 환기 특성에 관한 수치해석적 연구)

  • Lee, Chang-Yong;Cho, Dae-Hwan
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.28 no.4
    • /
    • pp.610-619
    • /
    • 2022
  • Hydrogen is emerging as an alternative fuel for eco-friendly ships because it reacts with oxygen to produce electrical energy and only water as a by-product. However, unlike regular fossil fuels, hydrogen has a material with a high risk of explosion due to its low ignition point and high flammability range. In order to safely use hydrogen in ships, it is an essential task to study the flow characteristics of hydrogen leakage and diffusion need to be studied. In this study, a numerical analysis was performed on the effect of leakage, ventilation, etc. on ventilation performance when hydrogen leaks in an enclosed space such as inside a ship. ANSYS CFX ver 18.1, a commercial CFD software, was used for numerical analysis. The leakage rate was changed to 1 q, 2 q, and 3 q at 1 q = 1 g/s, the ventilation rate was changed to 1 Q, 2 Q and 3 Q at 1 Q = 0.91 m/s, and the ventilation method was changed to type I, type II, type III to analyze the ventilation performance was analyzed. As the amount of leakage increased from 1 q to 3 q, the HMF in the storage room was about 2.4 to 3.0 times higher. Furthermore, the amount of ventilation to reduce the risk of explosion should be at least 2 Q, and it was established that type III was the most suitable method for the formation of negative pressure inside the hydrogen tank storage room.

Appropriate Smart Factory : Demonstration of Applicability to Industrial Safety (적정 스마트공장: 산업안전 기술로의 적용 가능성 실증)

  • Kwon, Kui-Kam;Jeong, Woo-Kyun;Kim, Hyungjung;Quan, Ying-Jun;Kim, Younggyun;Lee, Hyunsu;Park, Suyoung;Park, Sae-Jin;Hong, SungJin;Yun, Won-Jae;Jung, Guyeop;Lee, Gyu Wha;Ahn, Sung-Hoon
    • Journal of Appropriate Technology
    • /
    • v.7 no.2
    • /
    • pp.196-205
    • /
    • 2021
  • As industrial safety increases, various industrial accident prevention technologies using smart factory technology are being studied. However, small and medium enterprises (SMEs), which account for the majority of industrial accidents, are having difficulties in preventing industrial accidents by applying these smart factory technologies due to practical problems. In this study, customized monitoring and warning systems for each type of industrial accident were developed and applied to the actual field. Through this, we demonstrated industrial accident prevention technology through appropriate smart factory technology used by SMEs. A customized monitoring system using vision, current, temperature, and gas sensors was established for the four major disaster types: worker body access, short circuit and overcurrent, fire and burns due to high temperature, and emission of hazardous gas. In addition, a notification method suitable for each work environment was applied so that the monitored risk factors could be recognized quickly, and real-time data transmission and display enabled workers and managers to understand the disaster risk effectively. Through the application and demonstration of these appropriate smart factory technologies, the spread of these industrial safety technologies is to be discussed.

Development of Real-time Groundwater Quality Monitoring and Advanced Groundwater Purification Technology for Groundwater using Photoinduced Reactive Oxygen Species (지하수 수질 실시간 모니터링 및 광유도 활성산소를 이용한 고도수처리 기술)

  • Kang-Kyun Wang;Byung-Woo Kim
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.15-15
    • /
    • 2023
  • 2020년 기준 국내 상수도 보급률은 99.1% 차지하고 있으며(환경부, 2019), 수도관리차원에서 수돗물은 먹는 물로 시판되어질 만큼 우수한 관리체계를 유지하고 있다. 그 반면에 지하수는 생활용수, 식품가공, 농·축산, 양어, 군부대를 비롯한 전국지역에서 연간 10억 8천만톤 용수를 소비하고 있음에도 (환겨례 신문, 2013; 환경부, 2019) 사용되는 지하수의 약 65%가 음용수 불가판정을 받았으며, 최근 지하수의 오염비율은 급격히 증가하는 추세이다. 특히, 지하수관정의 관리부주의에 의한 수질오염 및 수인성 다제내성균(슈퍼박테리아) 등에 의한 오염사례가 국내는 물론, 국제적으로 다수 보고되고 있는 실정이다 (환경부, 2013). 현재 지하수 수질관리는 공공기관 및 지자체 지정기관을 통해 진행되고 있으며, 검사기간은 수질채취로부터 통상 7~15일정도 소요되어 수질 관리 및 기준, 검사주기에 대한 애로가 많다. 현장 지하수관정에서 실시간 수질을 모니터링하고 이에 연동된 자동 수처리 시스템의 개발 및 도입은 나날이 심각해지는 환경오염 상황에서 선제적 예방과 해결방법으로 중요한 요소기술이다. 현재 지하수오염 및 부적합 음용의 수질처리는 화학약품, 필터여과, UV살균, O3 (플라즈마)을 이용하는 것이 대표적이나, 화학약품의 경우 2차 오염이나 식품 세척 및 가공에 있어 부적합성의 한계점이 있다. 필터여과의 대표적인 RO필터의 경우 약 50% 순손실이 발생하고, UV 살균의 경우 UV에 의한 사용관리자의 위험 및 장비의 광부식 문제, O3 의 경우 고압전류 사용에 따른 위험성 등의 한계점이 나타나고 있다. 지하수 수질정화를 위한 광유도 활성산소(1O2, ·O-2)는 광감응제에 가시광의 빛 조사를 통해 생성되는 활성산소로의 에너지 및 전자 전이가 동시 진행되어 단일항 산소(1O2)와 슈퍼옥사이드 이온(·O-2)을 생성하게 된다. 생성된 활성산소는 유해미생물 또는 유기화학물과 개열, 제거, 치환 반응 등을 통해 미생물사멸 및 유해화학물질들이 분해 가능하다. 이를 이용한 지하수 유해미생물 사멸기술, 장비, 실시간 지하수의 분석기술 및 정수처리, 지하수 물순환 시스템 개발뿐만 아니라 지하수 음용수 및 오염개선, 지하수 기저유출에 의한 오염원 저감으로부터 지류·지천, 하천 본류 수질개선 등의 대상지역에 활용 가능하다. 또한 광유도 활성산소는 기존 상수도 수처리에 있어 오존(O3) 처리와 이산화티탄을 이용한 AOP과정을 단일처리 공정으로, 기존 O3 의 특성상 확산 거리가 매우 길어 사람을 포함한 생체 내에 유입 시 다양한 부작용 발생과 O3 차폐시설 요구의 문제점 극복의 대안으로 환경 및 인체에 무해한 광유도 활성산소 시스템을 적극적으로 도입 및 적용해야 한다. 본 연구 목적은 정류상태 흡광분광기술을 이용한 실시간 수질 모니터링과 광유도 활성산소를 이용한 유해 미생물의 멸균효능 및 지하수 수질관리 기술로의 적용 가능성을 제시하고자 한다.

  • PDF

A Case Study on the TEMAZ Explosion Accident in Semiconductor Process (반도체 공정에서 TEMAZ폭발사고 사례연구)

  • Yang, Won-Baek;Rhim, Jong-Kuk;Hong, Seong-Min
    • Journal of the Korean Institute of Gas
    • /
    • v.21 no.6
    • /
    • pp.52-60
    • /
    • 2017
  • In diffusion process exhaust line during semiconductor manufacturing process, In order to improve the transportation efficiency in the piping by removing "The reaction by-product, $ZrO_2$ and The unreacted material, TEMAZ, TMA, $O_3$, etc" and "Powder being deposited", the piping temperature was raised to $80^{\circ}C$ or more by using the heater jacket, and the bellows at the rear end of the vacuum pump ruptured. So conducted a case study and try to prevent the similar accidents from occurring through case studies. The causes of the accident were analyzed as follows: the inflow of outside air due to the generation of a gap on the suction side of the vacuum pump and heating the pipe with the heater jacket resulted in the overpressure in the pipe due to the volumetric expansion of the gas generated by decomposition of the unreacted TEMAZ, It can be assumed that the most vulnerable bellows of the piping has been ruptured. In order to prevent such accidents, This study is aimed to identify the cause of pipeline rupture accident and to establish safety measures for the prevention of similar accidents by evaluating physical hazards of TEMAZ, which is assumed to be the cause of pipe rupture accident.

Investigation of Reportable Communicable Diseases and Parasites in Aquatic Organisms Living in the Estuary of the Han River (한강 하구에 서식하는 수산생물의 법정전염병 및 기생충 감염 조사)

  • Kim, Jin Hui;Song, Jun Young;Lee, Jung-Ho;Hur, Jun Wook;Kwon, Se Ryun;Kwon, Joon Yeong
    • Korean Journal of Ecology and Environment
    • /
    • v.52 no.4
    • /
    • pp.306-315
    • /
    • 2019
  • The estuary of the Han River constantly suffers from pollutants and pathogenic microorganisms which could cause serious damage to aquatic organisms living there. Despite of this potential risk, it is hard to find any reliable scientific reports on the status of reportable disease infection to the organisms living in this area. In this study, cyprinid fish and crustaceans in Jeonryu-ri, a region of the Han River estuary, were investigated for the infection by representative reportable communicable diseases(SVC, spring viraemia of carp; KHVD, koi herpesvirus disease; EUS, epizootic ulcerative syndrome; WSD, white spot disease) and parasites. Peripheral fish and primary freshwater fish were observed in Jeonryu-ri with cyprinid caught most frequently. Crustaceans were mostly marine species. No positive bands to any of the reportable diseases were produced in any of the fish and crustacean examined in this study by PCR. No trace of Clonorchis sinensis, a liver fluke potential threat to human health, was detected in any of fish samples. However, many fish were infected by metacecaria of other flukes, and other various parasites such as nematode, cestode, copepod, monosite and acanthocephalan. These results suggest that important aquatic organisms in the Han River estuary is not seriously polluted yet. However, it is important to keep monitoring the diseases since the water quality in this region is constantly changing, and devastating influence of infectious diseases is unpredictable. Further, it is required to expand monitoring area toward upstream and increase the number of fish for examination.

Design and Implementation of an HNS Accident Tracking System for Rapid Decision Making (신속한 의사결정을 위한 HNS 사고이력관리시스템 설계 및 구현)

  • Jang, Ha-Lyong;Ha, Min-Jae;Jang, Ha-Seek;Yun, Jong-Hwui;Lee, Eun-Bang;Lee, Moon-jin
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.23 no.2
    • /
    • pp.168-176
    • /
    • 2017
  • HNS accidents involve large-scale fires and explosions, causing numerous human casualties and extreme environmental pollution in the surrounding area. The widespread diffusion of effects should be prevented through rapid decision making. In this study, a high-quality, standardized, and digitized HNS accident databases has been generated based on the HNS standard code proposed. Furthermore, the HNS Accident Tracking System (HATS) was applied and implemented to allow for systematic integration management and sharing. In addition, statistical analysis was performed on 76 cases of domestic HNS accident data collected over 23 years using HATS. In Korea, an average of 3.3 HNS accidents occurred each year and major HNS accident factors were Springs (41 %), Aprons (51 %), Chemical Carriers (49 %), Crew's Fault (45 %) and Xylenes (12 %). (The number in parentheses is the percentage of HNS accident factors for each HNS accident classification)

Estimation of Potential Risk and Numerical Simulations of Landslide Disaster based on UAV Photogrammetry (무인 항공사진측량 정보를 기반으로 한 산사태 수치해석 및 위험도 평가)

  • Choi, Jae Hee;Choi, Bong Jin;Kim, Nam Gyun;Lee, Chang Woo;Seo, Jun Pyo;Jun, Byong Hee
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.41 no.6
    • /
    • pp.675-686
    • /
    • 2021
  • This study investigated the ground displacement occurring in a slope below a waste-rock dumping site and estimated the likelihood of a disaster due to a landslide. To start with, photogrammetry was conducted by unmanned aerial vehicles (UAVs) to investigate the size and extent of the ground displacement. From April 2019 to July 2020, the average error rate of the five UAV surveys was 0.011-0.034 m, and an elevation change of 2.97 m occurred due to the movement of the soil layer. Only some areas of the slope showedelevation change, and this was believed to be due to thegroundwater generated during rainfall rather than the effect of the waste-rock load at the top. Sensitivity analysis for LS-RAPID simulation was performed, and the simulation results were compared and analyzed by applying a digital elevation model (DEM) and a digital surface model (DSM)as terrain data with 10 m, 5 m, and 4 m grids. When data with high spatial resolution were used, the extent of the sedimentation of landslide material tended to be excessively expanded in the DEM. In contrast, in the result of applying a DSM, which reflects the topography in detail, the diffusion range was not significantly affected even when the spatial resolution was changed, and the sedimentation behavior according to the river shape could be accurately expressed. As a result, it was concluded that applying a DSM rather than a DEM does not significantly expand the sedimentation range, and results that reflect the site situation well can be obtained.