• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.5
• /
• pp.208-215
• /
• 2005

The 10mm diameter aggregates made of clay, carbon and $Fe_2O_3$ were prepared to investigate the mechanism of black core formation. The specific gravity, absorption rate, percent of black core area, fracture strength, total Fe analysis, and XRF were measured at various compositions, sintering temperatures, sintering times, sintering atmospheres, and sintering methods. Small addition of $Fe_2O_3$ did not affect physical properties of the aggregates; however, the percent of black core area increased with increasing carbon contents and increasing sintering temperature. Specific gravity of the aggregates decreased and the water absorption ratio increased with increasing percent of black core area. The aggregates sintered at oxidation atmosphere showed clear border between shell and black core area. Hence, the aggregates sintered at reduction atmosphere showed only black core area in the cross-section of the aggregates. The specific gravity of the aggregates sintered at reduction atmosphere increased with increasing carbon contents and that was the lowest of all comparing other aggregates sintered at different atmospheres. Adsorption rate increased with increasing carbon contents at all atmospheres. The fast sintered aggregates showed lower specific gravity, higher absorption rate, and more black core area than the normally sintered aggregates. It was turned out that the aggregates having more black core area showed higher fracture strength than that of aggregates with no black core area. From the total Fe analysis, the concentration of Fe and FeO was higher at black core area than at shell. Because the concentration of $Fe_2O_3$ in the shell was higher than other area, the color of the shell appeared red. It was also turned out from the XRF analysis that carbon was exist only at black core area.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.120-129
• /
• 2016

The user cost is an important analysis item which should be considered together with life-cycle of facility, administrator cost and discount rate in LCCA for efficient asset management of SOC facilities. Especially, a significant delay cost occurs often for users in the road field due to a work zone for cleaning and maintenance, and in such case, the administrator should consider the administrator cost as well as the user cost for more rational decision making. However, the user cost has not been considered in most decision making steps until recently and relevant studies also have not been carried out actively. In this study, the methodology to estimate the user cost and delay cost required in the decision making step using the traffic flow model and the direct benefit estimation model in the traffic facility investment evaluation guideline is suggested. And, the traffic flow model was estimated on 4 national highway sections where maintenance was actually carried out in 2014 using VISSIM and, the user cost and the delay cost were estimated based on the suggested methodology. The analysis result showed that the average user cost of $17,569,000KRW/km{\times}day$ occurred on Section A with approximately 30,000 AADT before a work zone occurred, and in case the first lane was blocked for maintenance, the delay cost of $10,193,000KRW/km{\times}day$ (158%) on average occurred additionally. The delay cost of $1,507,000KRW/km{\times}day$ (115%) and $1,985,000KRW/km{\times}day$ (119%) occurred on Sections B and D with approximately 20,000 AADT respectively and the delay cost of $262,000KRW/km{\times}day$ (105%) occurred on Section C with approximately 10,000 AADT. This result of this study was estimated based on the simulation of traffic flow model so that there is a limitation in its actual application. A study ot develop a highly appropriate model using actual observation data and improve the possibility to apply it through the verification using the simulation will be necessary in future.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2013

The aim of this work is to verify the self-quality assurances in medical institutions in Korea through the external audits by the group of experts and have a mutual discussion of the systematic problems. In order to validate the external audits 30 of 80 medical institutions across the nation were picked out considering the regional distribution and the final 25 institutions applied voluntarily to take part in this work. The basic rules were setup that any information of the participants be kept secrete and the measurements be performed with the dosimetry system already verified through intercomparision. The outputs for 2 or more photon beams, the accuracy of gantry rotation and collimator rotation and the poistional accuracy of MLC movement were measured. The findings for the output measurement showed the differences of -0.8%~4.5%, -0.79%~3.01%, and -0.7%~0.07% with respect to that of the verified dosimetry system for the 6MV, 10MV, and 15MV, respectively. For the reference absorbed dose 8 (16%) of 50 photon beams in 25 medical institutions differed 2.0% or greater from the reference value. The coincidences of Field size with x-ray beam and radiation isocenters of Gantry roration and collimator rotation gave the results of within ${\pm}2$ mm for every institute except 2 institutions. The positional accuracy of MLC movement agreed to within ${\pm}1$ mm for every institute. For the beam qualities of 6 MV photon beams kQ values showed the distribution within 0.4% between maximum and minimum. For the protocols 21 institutions (84%) used absorbed dose to water based protocol while 4 insitutions (16%) used air kerma based one. 22 institutions employed the SSD technique while 3 institutions did the SAD one. External audit plays an important role in discovering the systematic problems of self-performing Quality Assurances and having in depth discussion for mutual complementation. Training experts of international level as well as national support system are required so that both the group of experts of medical physicists and government laboratory could perform together periodical and constant external audits.

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2013

This study was conducted to investigate the reliability of automatic cracked and bloody egg detector according to the age of the hens and the level of the detector. The results of this study are expected to be helpful in the implementation of the Korean egg grading system, which is expected to improve egg quality for consumers. An official egg grader randomly selected 1,000 eggs for each experiment (total 36,000 eggs), ran them through the automatic detector, and conducted labor inspection using the eggs that were classified by the detector as cracked, bloody, and normal eggs. The results showed that more cracked eggs were laid by hens aged 40-60 weeks than by hens aged 30 weeks (p<0.05). Also, when the detector level increased from four to seven (i.e., when it became less sensitive), its cracked eggs detection rate dropped, and the total rate of cracked eggs was consistent after the labor inspection of the classified eggs. The automatic detector achieved over 97 percent accuracy. The bloody eggs constituted only 0.005 percent of all the samples, and all the detector-detected eggs were bloody eggs after the labor inspection of both the bloody and normal egg lines. Therefore, it can be concluded that the automatic cracked and bloody egg detector was reliable and can be used in the egg grading system. Considering that cracked eggs should be less than 9 percent of first-grade eggs in the present egg grading system, the use of an automatic crack detector may help provide better-quality eggs to consumers by producing less than 5.5 percent cracked eggs.

• Food Science and Preservation
• /
• v.24 no.8
• /
• pp.1103-1112
• /
• 2017

This study was performed to investigate the effects of different cooking methods (boiling, roasting, stir-frying, and deep-frying) on folate retention in 6 kinds of mushrooms (Beech-, button-, Juda's ear-, oak-, oyster-, and winter-mushrooms) frequently consumed in Korea. In order to assure reliability of analytical data, trienzyme extraction-L casei method was verified and analytical quality control was also evaluated. Folate contents of mushrooms varied by 6.04-64.82 g/100 g depending on the type of mushrooms. and were significantly affected by cooking methods. Depending on cooking methods, folate contents of mushrooms decreased by 22-48%, 2-31%, and 17-56% for Juda's ear-, oak- and oyster-mushrooms, respectively, while 17-90% of folate was increased in Beech mushroom. Overall, the largest weight loss was found in boiled mushrooms, but the lowest one in deep-fried samples. True folate retention rates considering processing factor were less than 100% for all cooked mushrooms except for Beech samples. Overall, folate loss was the largest by boiling with water but the smallest by deep-frying. Both accuracy and precision of trienzyme extraction-L-casei method were excellent based on a recovery close to 100% and coefficient variations less than 3%. Quality control chart of folate analysis (n=26) obtained during the entire study and an international proficiency test (z-score=-0.5) showed that trienzyme extraction-L casei method is reliable enough for production of national folate database.

• Journal of agricultural medicine and community health
• /
• v.34 no.2
• /
• pp.155-167
• /
• 2009

Objectives: The purpose of this study was to investigate healthy city project related characteristics to members of the Korea Healthy Cities Partnership(KHCP). Methods: This study analyzed general characteristics of healthy city, characteristics of healthy city(political support, collaboration & citizen participation, healthy city project, infrastructure development, capacity building), self-evaluation of healthy city and etc by self-questionnaires from February to December, 2007, which were distributed to government workers who were in charged in health city project of 23 membership cities of KHCP. Results: The number of urban city was 11(47.8%) and that of rural municipality was 12(52.5%). Public health center was almost in charge of healthy city project(73.9%). As for the characteristics of healthy city, healthy city municipal budget(91.3%), city health profile(91.3%), technical support of cooperative university(82.6%), healthy city regulation(78.3%), citizen participation(78.3%), committee(73.9%), setting approach(69.9%) and healthy city network(69.6%) were good. But intersectoral collaboration(34.8%), long-term healthy city plan(39.1%), administrative policy or campaign promise(43.5%), programs to the vulnerable population(47.8%), department in charge(47.8%) and seminar(47.8%) were not good. Especially, characteristics of healthy city according to the existence of department in charge were significantly different in intersectoral collaboration, citizen participation, setting approach and healthy city network. Conclusions: In spite of rapid expansion in healthy cities, there were great difficulty in political support, collaboration, department in charge and programs of health equity. So we need to go a long way to achieve the vision of healthy cites by its principles and characteristics.

• Journal of agricultural medicine and community health
• /
• v.34 no.2
• /
• pp.175-187
• /
• 2009

Objectives: This study was conducted to investigate whether joint effects between family allergy history and environmental tobacco smoke(ETS) by parents were associated with pediatric asthma and wheezing. Methods: The study objects of this study were 2301 element school students and their parents in an urban-rural areas of Gyeonggi-do. Pediatric asthma and wheezing were identified by measures of International Study of Asthma and Allergies in Childhood (ISAAC) questionnaires. We investigated history of parental allergy, ETS, and other socioeconomic status of both parent. Data were analyzed using logistic regression methods. Results: After adjusting other variables, children with maternal asthma history were more likely to be reported life time wheezing (OR: 3.79 95%CI:2.43-5.90), recent wheezing (OR:4.09 95%CI:2.28-7.38), and diagnostic asthma (OR:2.61 95%CI: 1.44-4.75). Paternal asthma history increasing risk of life time wheezing (OR 2.01 95%CI:1.19-3.38) and recent wheezing (OR:2.38 95%CI:1.24-4.56). Joint effect between parental allergy history and ETS significantly effected on child's life time wheezing and recent wheezing. The risks of life time wheezing (OR:2.47 95%CI:1.64-3.717) and recent wheezing (OR: 2.51 95%CI:1.34-4.69) were significantly higher than others without both factors. The risk of recent wheezing of children with maternal recent smoking and parental allergy history (OR:4.83 95%CI:1.89-12.33) was higher than their counterpart. Conclusions: The result of this study implies that children with family allergy history and passive smoking are more likely to be get asthma and wheezing than children with family allergy history and non-passive smoking. This study provide the object information to increase the efficiency of non-smoking campaign and education for decreasing pediatric asthma risk.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.636-644
• /
• 2004

Recently, self-etching adhesive system have been developed and bonding procedures simplified into one or two steps, which are simultaneously applied to both enamel and dentin. These systems are easy to use and have the potential for good clinical success. The purpose of this study is to evaluate in vitro the microleakage on the cementum/dentin and enamel walls in composite resin restoration of Class V cavities, regarding the use of different adhesive systems. 30 human premolars were divided into 3 groups. A standardized Class V preparation was prepared on the buccal and lingual surface of each premolar. The preparation were made parallel to the cementoenamel junctions, with the gingival half of the preparation extending 1mm apical to the cementoenamel junction. After adhesive system was applied to teeth as manufacture's recommendation, hybrid resin composite was filled in bulk into the preparation and light polymerized according to manufacturer's recommendations. Specimen were stored in distilled water at $37^{\circ}C$ for 5 days and thermocycled 1000 times ($5^{\circ}C{\pm}2^{\circ}C\;and\;55^{\circ}C{\pm}2^{\circ}C)$, then immersed in a 2% methylene blue solution for 12 hours. After sectioning mesio distally through the restorations, the degree of dye penetration was scored under a stereomicroscope at ${\times}\;25$ magnification. The data were analyzed statistically using t-test and one-way ANOVA. The results were as follows: ${\cdot}$ There is no adhesive system which can prevent microleakage perfectly. ${\cdot}$ There is significant difference in microleakage between enamel margin and dentin margin (p<0.0001). ${\cdot}$ In enamel margin, self-etching primer systems did not show any significant difference comparing total-etching system. In denin margin, self-etching primer systems did not show any significant difference comparing one-bottle adhesive system used in combination with total-etching.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.73-84
• /
• 2015

In this research, two careers connectable with the contents of the curriculum of fifth to sixth grade elementary school students were selected among other promising future careers in biotechnology and medical engineering fields. 'Design-based promising future career STEAM program' was developed and its validity and effectiveness were verified. Reflecting recent issues, and complying with the STEAM standard (frame) instructional materials were developed through group deliberations for nine months, based on the achievement standards through an analysis of subject curriculum revised in 2009. This was prepared so that students are able to experience biotechnology and medical engineering related careers in a simulational form emphasized with creative design to make them prefer natural sciences and engineering careers and draw their interests and recognition of the relevant careers under the two disciplines. As a result of such application to STEAM Leader School students at the verification stage of the program, the contents and level of the program were verified suitable, receiving favorable reviews. And as a result of applying the developed program on other elementary school students, it was discovered that significant improvements were found in their career consciousness. Through this research, it was suggested that there is a need for a simplification of the curriculum content standards, a provision of 'standard for integration,' development of teachers' ability in reconstituting or organizing the STEAM and proceeding classes, continuous long-term support to see the effects of a policy or a program, and a reinforcement of career education integrated in the curriculum.

• Journal of Environmental Policy
• /
• v.6 no.2
• /
• pp.71-96
• /
• 2007

This study aimed at effectively applying the IUCN category system to the protected areas in Korea. In addition, in order to change IUCN category of national parks to IUCN category II and to review the application of IUCN category classification key, a case study was conducted in Sobaeksan National Park. In order to apply the IUCN category system to the protected areas in Korea, a flexible approach appropriate to characteristics in Korea is required for management objectives of protected areas, including protection of wildemess, sustainable use of resources and preservation of cultural and traditional features. In addition, considerations of restrictions on use area and use districts, relative comparison of use types (visit, use of resources, residence) by IUCN category and use of combined classifications are necessary. Principles for the application of the IUCN category include (1)exclusion of wilderness protected areas (Ib), (2) extremely limited use regarding the sustainable use of natural resources(sum of natural preservation area and natural environment area is over 95%), (3) considerations of management conditions, including residential occupation level, (4) preservation of ecosystem services, and (5) use of combined classifications. In addition, in accordance with these principles, IUCN category classification key was suggested. When this was applied to the case study area, Sobaeksan National Park was classified as IUCN Category II and Taxus cuspidata community, which is designated as a natural monument, was classified to be Category Ia. Classification key suggested in this study may be used as basic data for applying categories in the future. Since detailed review on the practical improvement direction of laws and regulations and systematic alternatives, which are required before introducing IUCN category, are poor, in order to manage the protected areas efficiently by applying the IUCN category in the future, studies on management means appropriate to the conservation objectives of each category are necessary. This would allow management differentiated for each category.