• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.7-17
• /
• 2006

In this paper, we proposed an optical true time-delay (TTD) for planar phased array antennas (PAAs), which is composed of a wavelength-dependent optical true time delay (WDOTTD) followed by a wavelength-independent optical true time delay (WIOTTD). The WDOTTD is a fiber Bragg gratings (FBGs) Prism and the WDOTTD is a fiber delay-lines matrix of which each component consists of a certain length of fiber connected to cross-ports of a 2${\times}$2 MEMS switch. A 10-GHz 2-bit${\times}$4-bit two-dimensional optical TTD has been fabricated by cascading a WDOTTD with a maximum time delay of 810 ps to a WIOTTD of $\pm$50 ps. Time delay and insertion loss for each radiation angle have been measured. Time delay error for the WIOTTD has been measured to be less than $\pm$1 ps. We have also designed a two-dimensional 10-GHz PAA composed of 8${\times}$8 microstrip patch antenna elements driven by the proposed TTD. The radiation patterns of this PAA have been obtained by simulation and analyzed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.36-37
• /
• 2000

최근 Micro-Opto-Electro-Mechanical(MOEMS)기술의 발달과 더불어 적응 광학(Adaptive optics)분야나 패턴 인식 분야에 적용 가능한 공간 빛 변조기의 개발이 이루어지고 있다. 적응 광학용 공간 빛 변조기는 대기의 turbulence에 의하여 왜곡된 빛의 위상을 파면 센서(wave sensor)와 실시간 제어기를 통해 보정하는 역할을 한다. 적응 광학 분야에서 상업적으로 사용되던 기존의 공간 빛 변조기는 전왜소자 배열(piezoelectric actuator array)에 의하여 지지되는 평면 거울을 사용하여 크기가 크고 전력 소비도 심하며 무엇보다도 가격이 비싸다는 단점이 있었다$^{(1)}$ . 그러나 MOEMS 기술의 적용으로 인해 공간 빛 변조기의 크기 및 무게 그리고 소비 전력이 줄어들었으며 반도체 공정을 통한 대량 생산으로 저가로 생산할 수 있게 되었다. (중략)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1071-1078
• /
• 2003

In this paper, the planar, compact, and broadband phased array antenna system for IMT-2000 applications has been investigated. Two methods far designing a low-cost and low-complex beam-farming network are proposed. First, a new compact and broadband phase shifter with continuously controlled phase bits is designed by using parallel coupled lines. Second, its equivalent phase delay line is suggested to be capable of replacing the complex phase shifter with a reference phase bit on a phased array antenna. For the purpose of achieving the broadband system, in addition to the broadband phase shifter, a wide-slot antenna with a ground reflector is utilized as an element antenna. Therefore, the phased array antenna system has achieved compact size, broad bandwidth, and wide steering angle, although it has low complexity and low fabrication cost. The 3${\times}$1 phased array antenna system has a compact size of 1.6 λ${\times}$ l.6 λ, which is the sufficient ground plane of the wide-slot antenna. Experimental results present that the S$\_$11/ has less than 15 dB within the band and its radiation patterns on an E-plane have the capability of steering an antenna beam from -29$^{\circ}$to +30$^{\circ}$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.77-84
• /
• 2003

This paper presents a multi-functional microstrip spital antenna that operates in dual frequency bands. Several types of beam shape can be selected by controlling the phase difference of two spiral arms with the phase shifters located on each feed line. It has a normal beam at the lower frequency band, and four different patterns at the higher frequency band: normal beam, conical beam and two types of tilted beam. The antenna exhibits more than 10% of bandwidth at each band. The antenna is fabricated with conductor backed electromagnetic absorber in order to attain unidirectional radiation pattern and confirmed the multi-functionality by measurements.

• Journal of Korea Multimedia Society
• /
• v.8 no.9
• /
• pp.1195-1207
• /
• 2005

In this paper, we describe image matching techniques which is automatically retrieving the exact matching area using geometry-phase information. We proposed a Matching Method which is rapidly estimating the correspondent points between adjacent images that included big-rotation and top-bottom movement element. It is a method that reduce computation quantity to be required to find an exact correspondent position using geometry-phase information of extracted points in images and DT map which set the distance value among feature points and other points on the basis of each feature point of a image. The proposed method shows good performance especially in the part to search a exact correspondent position between adjacent images that included big-rotation and top-bottom movement element.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.288-293
• /
• 2009

Polarization characteristics of a composite film composed of two optically anisotropic films are analyzed. The procedure to determine the effective optics axis and the equivalent retardation of the composite film is suggested in conjuction with the related ellipsometric expressions. The explicit expressions of the effective optic axis and the equivalent retardation of a non-uniform anisotropic film are derived when all optic axes are parallel. Those expressions of the composite film where optic axes of two constituting anisotropic films are not parallel are also derived. Dependence of those expressions on the polarization state of the incident light or the azimuth angle of the linearly polarized light and their limit when applied to practical use are discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.25-31
• /
• 2000

"모아레(MOIRE)"란 말은 처음으로 프랑스인들에 의해 불려진 단어로써 고대 중국에서 수입된 비단 위에 새겨진 물결무늬(wave pattern)를 일컫는 말이다. 이렇게 불리어지던 모아레는 요즈음에 들어서서 두 개 이상의 주기적인 패턴(periodic pattern)이 겹쳐질 때 만들어지는 간섭무늬 (interference fringe)를 지칭하는 말로써 다양한 분야에서 매우 광범위하게 사용되어 지고 있다.(중략)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.213-220
• /
• 2000

The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. The previous methods require much time and skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting technique for the stress analysis of a circular disk under compression and an edge-cracked plate subjected to tensile load. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$. Experimental results are compared with those or FEM. Good agreement between the results can be observed. However, some error may be included if the technique is used to general direction which is not parallel to isoclinic fringe.

• Journal of Korean Elementary Science Education
• /
• v.27 no.4
• /
• pp.385-398
• /
• 2008

The purpose of this study is to understand the effect of The Model of Phases of the Moon on conception changes for preservice teachers. The researcher interviewed two preservice teachers under the agreement with them on their participation in the research just before he performed a class using The New Model of Phases of the Moon. The post-interview with the same content as the pre-interview was preformed one month later. The main content of the interview is as follows; 'Explain the shape of the Moon by drawing it.', 'Explain the relative different position among the Sun, Earth, and Moon depending on phases of the Moon by drawing them.', 'What do you think of the cause of phases of the Moon?', 'Draw a picture to explain why we always see only one side of the moon.' The results of the research are as follows. First, the class with New Model of Phases of the Moon was able to perceive the relationship of Sun, Earth, and Moon in three-dimensions rather than in two-dimensions and it helped to change their misconception that the Moon's shadow causes the Moon's shape. Secondly, the class with New Model of Phases of the Moon helped preservice teachers understand better the different positional relationships among the Sun, Earth, and Moon depending on the Moon shapes. Third, the class adopting the New Model of Phases of the Moon help preservice teachers form scientific conceptions on the causes of phase change of the Moon. Fourth, the class with the New Model of Phases of the Moon is not appropriate for explaining the reason why only one face of the Moon is seen. Based upon the results above, the researcher realized the limitation of this model and suggested that this model would help learners understand phase change of the Moon and increase space perception ability.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.502-507
• /
• 2013

In this paper, a circular dual mode horn with modified aperture is proposed to improve a E/H-plane radiation pattern symmetry of a conventional oversized circular dual mode horn. The proposed antenna consists of a feeding section, a mode generation section and a phase matching section which has aperture shape transition from circle to ellipse or rectangle to improve a E/H-plane radiation pattern symmetry. To compare the performances between the proposed antenna and the convenional circular dual mode horn, the conventional circular dual mode horn and the proposed circular dual mode horn with rectangular aperture are fabricated and researched at 15 GHz. The measured results show that the conventional circular dual mode horn has 3.394 dB difference while the proposed antenna has only 0.539 dB difference between E and H-plane radiation patterns within the -11 dB beamwidth($53^{\circ}$) which is required beamwidth of the feed horn for the maximum aperture efficiency where f/d ratio of reflector antenna is 1.