• Korean Journal of Optics and Photonics
• /
• v.33 no.2
• /
• pp.59-66
• /
• 2022

A free-form Mueller matrix ellipsometer (MME) based on independent control of the azimuthal angle of each polarizing element is introduced. The azimuthal angles of the polarizer and the matching compensator which generate the optimum Stokes vectors of an incident beam are investigated for the polarization state generator, where the spectral responses of the retardation angle and transmittance ratio of a nonideal compensator are taken into account. Similarly, the azimuthal angles of the analyzer and the corresponding compensator are investigated for the polarization-state detector, to unambiguously determine the Stokes vector of the outcoming beam from the sample, and explicit expressions for the Stokes elements are derived. Since the suggested technique enables one to utilize a nonideal quarter-wave plate as the compensator for an MME, it will contribute to the construction and application of a Mueller matrix spectroscopic ellipsometer (MMSE) operating over a wide spectral range from deep ultra-violet to near infrared.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.220-232
• /
• 2012

In this paper, we investigate the correlation result due to the problems of delay tracking and fringe rotation module in the VCS(VLBI Correlation Subsystem). The VCS, FX-type correlator, adopts the delay tracking and fringe rotation module in order to compensate the delay change and fringe phase of wave signal from the radio source by Doppler's effect. The phase of observed data is also compensated by means of delay tracking and fringe rotation in the correlator, but we confirmed that the phase is unstable by applying long integration period of AIPS(Astronomical Image Processing System) rather than correlator. And the delay value of observed data has the errors of several tens nanoseconds than normal case at the analysis of correlation result. In addition, we found that the phase of correlation results is not connected as the unit of FFT-segment because the initial fringe phase at the fringe rotation module is not correctly determined. In this paper, in order to solve these problems, the original direction of 90 degree phase jump is reversely modified when the bit-shift occurred at the delay tracking. And the initial fringe phase at the fringe rotation module is correctly modified by using the initial phase of observed data. In addition, the parameter calculation module was abnormally operated as designed in the fringe rotation. So, the logical program by the VCS is modified so as to calculate the parameters correctly. Through the experiments of correlation processing over the above problems, the modified proposal algorithm is adequately corrected to the data analysis results, so that the experimental results make it clear for us to operate the developed VCS hardware correlator normally.

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.411-419
• /
• 2004

When the imaging object rotates in image plane during MRI scan, its rotation causes phase error and non-uniform sampling to MRI signal. The model of the problem including phase error non-uniform sampling of MRI signal showed that the MRI signals corrupted by rotations about an arbitrary center and the origin in image plane are different in their phases. Therefore the following methods are presented to improve the quality of the MR image which includes the artifact. The first, assuming that the angle of 2-D rotational motion is already known and the position of 2-D rotational center is unknown, an algorithm to correct the artifact which is based on the phase correction is presented. The second, in case of 2-D rotational motion with unknown rotational center and unknown rotational angle, an algorithm is presented to correct the MRI artifact. At this case, the energy of an ideal MR image is minimum outside the boundary of the imaging object to estimate unknown motion parameters and the measured energy increases when the imaging object has an rotation. By using this property, an evaluation function is defined to estimate unknown values of rotational angle at each phase encoding step. Finally, the effectiveness of this presented techniques is shown by using a phantom image with simulated motion and a real image with 2-D translational shift and rotation.

• Korean Journal of Optics and Photonics
• /
• v.34 no.3
• /
• pp.99-105
• /
• 2023

The performance of astronomical telescopes can be negatively affected by atmospheric turbulence. To address this issue, techniques for atmospheric turbulence correction have been developed, requiring the simulation of atmospheric turbulence in the laboratory. The most practical way to simulate atmospheric turbulence is to use a phase plate. When measuring a phase plate that simulates strong turbulence, a Shack-Hartmann wave-front sensor is commonly used. However, the laser power decreases as it passes through the phase plate, potentially leading to a weak laser signal at the sensor. This paper investigates the need to control the laser power when measuring a phase plate that simulates strong atmospheric turbulence, and examines the effects of the laser power on the measured wavefront. For phase plates with relatively high Fried parameter r₀, the laser power causes a variation of over 10% in r₀. For phase plates with relatively low r₀, the laser power causes a variation of less than 5%, which means that the influence of the laser power is negligible for phase plates that simulate strong atmospheric turbulence. Based on the system described in this paper, a phase plate simulating strong atmospheric turbulence can be measured at a laser power of 5 mW or higher. Therefore, controlling the laser's output power is necessary when measuring a phase plate for simulating atmospheric turbulence, especially for phase plates with low r₀ values.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.44-45
• /
• 2000

Shack-Hartmann 센서로부터 얻어진 기울기 정보로부터 파면을 재구성하고 분석하기 위해서는 각각의 점 영상에 대한 위상 구배로부터 파면의 위상을 재구성할 수 있는 수학적인 알고리즘이 필요하다. 파면의 위상을 재구성하기 위한 알고리즘은 Hudgin, Fried, Southwell이 제시한 세 가지 방법에 대한 연구결과가 가장 많이 알려져 있다. 본 연구에서는 CCD 카메라로부터 전송된 디지털 영상에서 각각의 점 영상의 중심점을 추출하여 점 영상의 이동정보로부터 수평과 수직방향의 기울기를 계산하고, 이를 바탕으로 최소제곱법(least-square fitting)을 사용하여 위상을 재구성하였다. 파면의 기울기 정보로부터 파면을 재구성하기 위해 기존의 이론을 바탕으로 행렬계산법을 사용하여 각각의 경우를 일반화하였고, 위상의 복구와 파면의 보정에 따른 해석적인 오차의 관계를 논의하였다. (중략)

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.1
• /
• pp.191-201
• /
• 1998

지리 정보 시스템에서 수치지도 보정(rubber sheeting)이란 물리적으로 동일 지역을 나타내고 있지만 일치하지 않는 두 지도사이의 불일치한 부분이 일치되도록 보정해 주는 것을 말한다. 불일치 종류는 수치지도를 생성하는 방법과 과정 등에서 발생할 수 있으며 또한 시간의 흐름에 따라 변화는 지리 정보의 특성으로 인해 발생하기도 한다. 본 논문에서는 지리 정보 시스템의 성능을 저하시키는 중요한 원인인 불일치 문제를 해결하기 위한 새로운 수치지도 보정 알고리즘을 제시한다. 제시한 방법은 다각형 커널의 무게 중심을 이용하여 다각형을 삼각분할한 후 삼각형 매핑을 적용하는 것이다. 다각형 외부에 위치한 시설물에 대해서도 동일한 방법을 적용하기 위해 제한된 딜로니(Delaunay)삼각분할을 이용하여 외부 영역을 다각형의 집합으로 만들어 주는 방법을 제시한다. 또한 본 논문에서는 수치지도 보정 결과를 평가하기 위한 측정 함수를 제시하였다. 측정 함수는 지리 정보의 특성을 구분짓는 세 가지 중요한 요소인 방향적(directional), 위상적(topological), 측량적(metrical)특성을 이용한다. 그리고 수치지도와 다양한 테스트 데이터를 이용하여 제시한 기법의 성능을 실험하고 그 결과를 측정 함수로 분석하여 제시한 기법이 불일치 해결에 좋은 결과를 보여 줌을 밝힌다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.274-279
• /
• 2011

To increase the performance of mobile communication systems, base statations having beamforming function are released recently. For the proper beamforming function, it is required that each RF paths be calibrated periodically. However, the current calibration method has a problem when the base station is connected to a repeater. In this paper, we report the problem and propose a new calibration method to solve the problem.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.715-719
• /
• 1998

In this paper, we propose a color enhancement system which is based on the improvement of transition time problem and specific color detection stability. The proposcd system apply the time difference correction step to corrects time difference which is taken place at the transimission process between color signal and color subcarrier signal and to reduce detection errors. And also, we proposed stability method to improve transition time problem and detection efficiency as the control of reference color. The proposed system controls specific color when the mean difference value of detected voltages greater than the value of minimum discriminate voltages of two adjacent color signals. Thus, the color enhancement system improves detection efficiency and controls specific color from the color signal without overlapping of correction range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.641-648
• /
• 2011

Frequency domain equalization is the most promising technology that has relatively low complexity in multipath channel. A frame of single carrier system with frequency domain equalization (SC-FDE) has cyclic prefix to mitigate effect of delay spread. After synchronization and equalization procedure on the SC-FDE system, common phase offset (CPO) that can introduce performance degradation caused by phase mismatch between transmitter and receiver oscillators is remained. In this paper, common phase offset tracking in frequency domain is proposed. To track CPO, constant amplitude zero autocorrelation code sequence as training sequence is adopted. By using numerical results, performance of mean square error is evaluated. The results show that MSE of CPO has similar performance compare to the time-domain estimation and there is no need of domain conversion.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.25-32
• /
• 2000

In this paper, we consider the effects on the bandpass filter characteristics due to the phase variation of the inverters with frequency, which introduces the deviations of the bandpass filter characteristics from the design goals. In order to resolve these kinds of problems, we proposed novel inverter configurations. And we derived the inverter formulas for the proposed inverter configuration. By employing the proposed inverter configuration and the derived formulas, bandpass filters are designed and simulated. In order to show the validity of the proposed design method, the simulation characteristics are compared with design results by conventional design procedures. Compared results show the compensation of the deviations of bandpass filter characteristics without any optimization or iterative design procedures and additional calculation efforts.