• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.10-14
• /
• 1999

One dimensional inhomogeneous phase modulation effects on the MTF of optical system was investigated. The lens under test was a doublet made in Korea. It was 36 mm effective diameter, 128.04 mm effective focal length. The ray-fans and spot diagrams were calculated and presented on the picture for on-axis and off-axis (field of view, $1^{\circ}$ and $2^{\circ}$). Phase modulation was carried out by positioning a phase modulator close contacted with the lens under test. One was linear type that had linearly increasing phase retardation and the other was stepped type which had phase difference $\pi$ for each step. The MTFs were measured on the Gaussian image plane and were compared with one another. The MTFs of linear type phase modulated apertures had a little lower values than the MTF of unmodulated aperture for on-axis but most of all the MTFs of one dimensional phase modulated aperture are improved than the MTF of unmodulated aperture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.289-296
• /
• 2001

We propose a method to add phase-modulation to binary amplitude data pages using a twisted-nematic liquid crystal display as a dynamic phase mask. For this, the phase modulation characteristics of the display were examined both theoretically and experimentally, and an unexpected abnormal phenomenon was found experimentally in which the modulation property changed as the incident beam intensity increased. To investigate the characteristics of holographically storing the binary data images, eight pages of holograms were stored at one spot of in un-thick Dupont's photopolymer with angle multiplexing. When phase-modulation-added pages were stored at the Fourier plane, the uniformity of the signal beam at the plane was improved, and thus more holograms can be recorded with our method, compared with the conventional case of using only binary amplitude modulation under the same condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1511-1517
• /
• 2014

Based on the simulation model for phase noise effect, the phase noise performance of communication system using the M-ary APSK modulation method is analyzed in this paper. The phase noise effects for APSK higher order modulation method are modeled by considering the signal constellations of the modulation methods. The simulation model is verified by comparing the analytic results for lower order modulation signals with simulated results for those modulation signals. Based on the simulation model, then, the phase noise effects for M-ary APSK are analyzed. The simulated results for PSK lower order modulation signals are in agreement with the results by the analytic model in the order of 1 %. The proper phase noise effects for M-ary APSK modulation signals are deduced by the simulation model. Also, the required signal-to-noise ratios of phase noise are proposed for phase noise degradations, which are used as the design parameter that considers the phase noise effect.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.184-188
• /
• 2003

We fabricated a P-I-i-I-N $GaAs/Al_{0.35}Ga_{0.65}As$waveguide phase modulator with significant phase shift for the TE mode but negligible for the TM mode. We selected the P-I-i-I-N structure to cause a phase shift about the TM mode. The wavelength of $\lambda=1.55$\mu\textrm{m}$ was measured for both the TE and TM modes, respectively. As a result, the measured phase shift efficiency ($\Delta\phi$) by using the Fabry-Perot resonance method was $7.9^{\circ}/V.mm$ for TE-polarized light. Also, no modulation was observed for TM-polarized light.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.22-27
• /
• 1993

We investigate the phase modulation effects on the OTFs of a binocular objective which is made in Korea.The OTFs are calculated from design data for FOV $0^{\circ}$ and $1.5^{\circ}$.The phase modulation is carried out by giving phase retardation $\pi$ on the aperture. The areas where the phases are retarded $\pi$ on the aperture are of an annular type. The OTFs of phase modulated aperture are also compared with that of unmodulated one. The OTFs of an aberration loaded system can be improved by proper phase modulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.450-457
• /
• 2003

In this paper, we studied the effect of asymmetrical 3rd order IMD of power amplifier due to changes in modulation frequency on IMD cancellation performance. The phase extraction method for determining asymmetric rate for phase distortion of IMD is proposed and the phase difference between lower and upper 3rd order IMD is measured by this method. The phase compensation circuit to decrease the phase difference is also designed and fabricated. From the measurement results using the phase compensation circuit applied to 5 W RF power amplifier fur PCS applications, the 3rd order IMD cancellation performance can be achieved up to 2-tone spacing 1.5 MHz (phase difference within 10$^{\circ}$).

• Korean Journal of Optics and Photonics
• /
• v.3 no.3
• /
• pp.143-147
• /
• 1992

1)iscussed in this paper are the effects of phase modulation on the line spread functions (LSF) and MTFs of ;I binocular objective system. The binocular objective lens is made in Korea. It has rotationally symmetric aberrations. The LSFs and MTFs are measured experimentally. The phase modulation is carried out by applying phase retardation $\pi$ on the aperture. The area where the phase is not retarded presents a double annular type. The OTF curves of phase modulated aperture are compared with that of unmodulated aperture. The comparison shows that there is the aberration compensation effect in aberration loaded system. Therefore the performance of many optical system can be improved without any loss of light energy by properly modulating the phase on the aperture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.182-190
• /
• 2011

A amplitude modulation(AM) range measuring system utilizes the phase difference of the modulated envelope of the reflected signal to measure the distance. It is known that the AM system has a problem in accuracy due to antenna leakage signals and spurious reflection signals, but an AM range measurement system using an active reflector, which shifts the frequency bands, has been proposed in order to minimize the measurement errors due to spurious signals. In this paper, a new phase measurement module for the AM range measurement system, which enables to measure long distance with good accuracy, is proposed. The modulation frequency is alternatively selected between 8 and 1 MHz, and the measured distance range with this module is up to 150 m within 2 cm accuracy. A JK flip-flop circuit is used for higher phase accuracy, and an XOR circuit is used to cover long distance.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.160-161
• /
• 2002

양자 암호화 키 분배 시스템에서 광자를 code화시키는 방법은 크게 편광coding과 위상 coding으로 대별할 수 있다. 또한 프로토콜은 4개의 상태를 가진 BB82 프로토콜과 2개의 상태를 가진 B92 프로토콜을 사용한 시스템을 많이 연구하고 있다. 본 연구는 B92프로토콜을 적용한, 위상 coding 양자 암호화 키 분배 시스템의 구성에 필요한 위상 변조기에 대한 비교 검토 및 위상 변조기 설계에 관한 것이다. (중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.270-274
• /
• 2002

본 논문은 고속 무선랜에 적용하고 있는 OFDM시스템에서 국부발진기의 위상잡음에 의해서 기저대역의 채널에서 나타나는 위상변위특성을 해석하고, 국부발진기를 포함하는 PLL시스템에서 위상잡음 변화를 수치적인 해석을 하였다. OFDM신호를 QPSK, 16QAM 변조신호로 전송하였을 경우, 위상잡음에 따른 관계를 변조신호의 성상도 및 BER관계로써 분석하였다.