• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.11-22
• /
• 2023

A radiating elements fault diagnosis method with simplified radiation pattern measurement procedure was presented for planar active phased array antenna system. For presenting the mentioned method, the technique for linear approximation based on the radiation characteristics of a planar array configuration and a technique for solving a unique solution problem that occur in process of diagnosing a fault in a radiating elements were presented. Based on the presented method and a genetic algorithm, experimental simulations were performed for radiating element defect diagnosis according to various planar active phased array antenna configurations. As a result, it was confirmed that the presented radiating element fault diagnosis method can be smoothly applied to planar active phased antennas having various configurations.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.59-68
• /
• 2003

An optimization Program is developed to produce new topologies of plane structures under multiload case. A four-node finite element is used in the response analysis to reduce the computation time and to ultimately achieve practical topology optimization. The bilinear finite element is prone to produce chequer-boarding phenomenon and a simple filtering process is therefore adopted. An artificial material model is employed to represent the structural material and the resizing algorithm based on the optimality criteria is adopted to update the material density parameter during optimization process. With newly developed optimization program, the comparison study has been made between single and multiload cases and its results are described in this paper. From numerical results, it appears that multiload case should be considered to achieve the practical topology optimization.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.222-226
• /
• 2007

In this paper we composed the dual fuzzy rules using each region of specific points and $e-{\Delta}e$ phase plane In order to make dual fuzzy rule base. We composed the fuzzy control rules which can decrease rise time, delay time, maximum overshoot than basic fuzzy control rules. proposed method is alternately use at specific points of $e-{\Delta}e$ phase plane with two fuzzy control rules that is one control rule occruing the steady state error in transient region and another fuzzy control rule use to decrease the steady state error and rapidly converge at the convergence region. Also, two fuzzy control rules in the $e-{\Delta}e$ phase plane decide the change time according to response characteristics of plants. In order to confirm thef proposed algorithm. As the results of experiments through the hydraulic servo motor control system with a DSP processor, We verified that proposed dual fuzzy control rules get the good response compare with the basic fuzzy control rule.

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.3
• /
• pp.28-33
• /
• 2004

본 논문에서는 자유곡면 간의 교차곡선이 갖는 위상 구조를 분석하는 방법을 제시하며, 또한 이를 이용하여 교차곡선을 효율적이고 안정적으로 계산하는 알고리즘을 제안한다. 자유곡면 간의 교차곡선 계산은 현재까지 난문제로 알려져 있으며, 그러한 가장 큰 원인 중의 하나로서 교차곡선의 위상 구조를 분석하기 어렵다는 점을 들 수 있다. 본 논문에서는 입력으로 주어지는 자유곡면 중의 하나가 매개변수 곡면 F(u, v) 이라는 가정 하에 음함수 곡면 g(x, y, z) = 0 과의 교차곡선, 그리고 또 다른 매개변수 곡면 G(s, t)와의 교차곡선 계산방법을 제시한다. 교차곡선은 uv-평면 상의 평면 곡선으로 고려되며, 이 평면곡선에서 u-방향에 대한 극점(critical point)을 먼저 계산한 뒤 이를 이용하여 위상구조를 분석한다. 또한, 분석된 위상구조를 기반으로 전체 교차곡선을 추적(tracing)하는 알고리즘을 제시한다.

• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.233-238
• /
• 2006

This paper provides a new topology optimization technique which is intended to maximize the fundamental frequency with simultaneous consideration of other natural frequencies in the form of multi-frequency problems. The modal strain energy is considered as the objective function to be minimized and the initial volume of structures is used as the constraint function. The resizing algorithm based on the optimality criteria is adopted to update the hole size existing inside the material. From numerical tests, the proposed technique is found to be very effective to maximize the fundamental frequency of the structure and it can also successfully consider several higher mode effects into the optimum topology of structure through the introduction of weights.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.6
• /
• pp.524-530
• /
• 2002

This note suggests a stepwise fuzzy moving sliding surface using Sugeno-type fuzzy system and presents a sliding mode control scheme using it. The fuzzy system has the angle of state error vector and the distance from the origin in the phase plane as inputs and a first-order linear differential equation as output. The surface initially passes arbitrary initial states and subsequently moves towards a predetermined surface via rotating or shifting. This method reduces the reaching and tracking time and improves robustness. Conceptually the slope of the Proposed fuzzy moving sliding surface increases stepwise in the stable region of the phase plane. The surface, however, rotates continuously because the surface is a fuzzy system. The asymptotic stability of the fuzzy sliding surface is proved. The validity of the proposed control scheme is shown in computer simulation for a second-order nonlinear system.

• 전기의세계
• /
• v.16 no.5
• /
• pp.6-14
• /
• 1967

The relaxation oscillations which occur independently by increasing the

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.46-53
• /
• 2011

The effect of a finite substrate on the radiation characteristics of a linear 7-element array antenna positioned along the E-plane is investigated. Active reflection coefficients and average active element patterns are simulated for various substrate sizes. The E-plane radiation pattern of a fully excited array for various scan angles is correlated with the active reflection coefficient and average acitive element pattern. The effect of E-plane substrate size on the radiation characteristics of a linear array along the E-plane is larger than that of H-plane substarte size.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.111-118
• /
• 2003

Notch Antenna is a travelling wave type antenna and can provide multioctave operation in phased arrays that scan over wide angle. In this paper, we designed a wideband E-plane phased array antenna using E-plane waveguide simulator which has a bandwidth of 3 : 1 and a scan volume of $\pm$45$^{\circ}$ in E-plane. We compared impedance of single antenna and infinite array antenna using equivalent circuit modeling. We analyzed full structure of 1$\times$9 phased array antenna and we evaluated active reflection coefficient with variation of beam scan angle through mutual coupling coefficient acquired from simulation and investigated the variation of antenna gain with variation of active element pattern as beam scan angle is varied.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.500-505
• /
• 2015

Through Montecarlo simulation, this study compares how accurately the existing three phase deviation models estimate the time-varying variance of a planar oscillator perturbed by Gaussian noises. The comparison reveals that Kaertner model estimates the time-varying variance with about 1000 times higher accuracy than ISF or PP model exhibits. Additionally, it finds that the estimation accuracy of PP model is somewhat higher than that of ISF model.