• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1968-1974
• /
• 1997

In this paper, the spectral domain approach is employed to investigate the characteristics of symmetrical and asymmetrical broadside-coupleed coplanar waveguides(BSC-CPW). These structures have large even(c)-odd(.pi.) mode-velocity ratio, suitable for wide-band and tight-coupling microwave circuit design. Efficient design parameters can be obtained from the effective dielectric constants and characteristic impedances calculated by varying the strip widths and slot widths in the BSC-CPW structure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.448-449
• /
• 2022

In the image upscaling field, the method using deep learning is showing better results than using the interpolation method. And for hologram upscaling, using deep learning is showing better results than general interpolation. In this paper, the network structure and learning results are analyzed. The learning results are compared by adjusting the depth of the network and the number of channels at the same weight.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.82-89
• /
• 2004

This paper describes how to reduce the effect of an occupation threshold by that the transform of mixture components of HMM parameters is controlled in hierarchical tree structure to prevent from over-adaptation. To reduce correlations between data elements and to remove elements with less variance, we employ PCA (principal component analysis) and ICA (independent component analysis) that would give as good a representation as possible, and decline the effect of over-adaptation. When we set lower occupation threshold and increase the number of transformation function, ordinary WLLR adaptation algorithm represents lower recognition rate than SI models, whereas the proposed MLLR adaptation algorithm represents the improvement of over 2% for the word recognition rate as compared to performance of SI models.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.213-217
• /
• 2008

In this paper, a new design method for IMC-PID that adds a phase scaling factor of system identifications to the standard IMC-PID controller as a control parameter is proposed. Based on analytically derived frequency properties such as gain, phase margin and maximum magnitude of sensitivity function, this tuning rule is an optimal control method determining the optimum values of controlling factors to minimize the cost function, integral error criterion of the step response in time domain, in the constraints of design parameters to guarantee qualified frequency design specifications. The proposed controller improves existing single-parameter design methods of IMC-PID in the inflexibility problem to be able to consider various design specifications. Its effectiveness is examined by a simulation example, where a comparison of the performances obtained with the proposed tuning rule and with other common tuning rules is shown.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.4
• /
• pp.89-95
• /
• 1995

The waveform coding technique has concerned with simply preserving the waveform shape of speech signal through a redundancy reduction process. In the case of speech synthesis, the waveform coding with high sound quality is mainly used to the synthesis by analysis. However, since the parameters of this coding are not classified into either excitation or vocal tract parameters, it is difficult to applying the waveform coding to the synthesis by rule. In order to apply the waveform coding to the synthesis by rule, the pitch alteration technique is required in prosody control. In this paper, we propose a new pitch alteration method that can change the pitch period in waveform coding by scaling the time-axis and compensating the spectrum. This is relevant to the time-frequency domain method were the phase components of the waveform is preserved with a little spectrum distortion of 2.5 % and less for 50% pitch change.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.546-551
• /
• 2002

In this paper, a triple controlled type DDFS-driven PLL frequency synthesizer with reduced complexity is used to show its applications for broadband wireless communication systems by frequency synthesis control. Since the proposed DDFS-driven PLL synthesizer is very simplified to use only phase accumulator in DDFS, it improves the switching speed and power consumption than the conventional DDFS-driven PLL frequency synthesizer. It is appropriate for applications with requirements of broadband, low-power consumption and high switching speed, since the proposed synthesizer can cover a wide range of frequency bands by the triple frequency control parameters. Method and results of frequency control parameters assignment are shown for the several frequency bands applications such as GSM, IMT-2000, Bluetooth and PCS system.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.2
• /
• pp.99-104
• /
• 2014

Active vibration control methods are required in the high speed rotor systems supported by magnetic bearings. A prediction control technique is one of the control methods. Gain and phase angle are primarily chosen with analyzing the responses for a certain rotor speed. The feasibility of this technique has been reported for only analytical simulations. Therefore this paper constructs the test rig supported by ball bearings with a magnetic bearing type actuator and develops a prediction control system by using LabVIEW and Compact RIO. Finally as rotating speeds are modulated, the gains and phase angles for the speeds are determined with vibration control of the test rig. This leads that the prediction control technique may be applied to the rotor system with the magnetic bearing.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.99-103
• /
• 1996

Most waveform coding techniques attempt to reduce redundancy of speech signal while preserving the shape of the waveform. In speech synthesis, wavefrom coding methods are used to the synthesis by rule for high quality speech. However, it is difficult to apply the waveform coding to the synthesis by rule because the parameters of the wavefrom coding cannot be classified as either the excitation or the vocal tract parameters. The proposed method shows little spectrum distortion of 2.7% or less for 50% pitch changes. It also achieves smooth connection of wavefrom magnitudes among the frames by compensating the phase in time domain.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.1
• /
• pp.87-92
• /
• 2011

This article proposes a new technique of the dynamic model using multi-body dynamic analysis tool for a flexible main spindle rotor system with a novel phase adjusting control technique for the purpose of an active control of rotor vibration. The dynamic model is used as a plant model. Also in order to make control system, a component parameters and phase controller is composed and simulated by SIMULINK. The vibration is reduced to 50%. Therefore the ADAMS dynamic model for the flexible main spindle rotor and the phase adjusting control techniques may be effective for the suppressing the vibration and helpful for the future active control for rotor vibration.

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.935-943
• /
• 2020

In this paper, we propose a method using deep learning for high-resolution display of phase holograms. If a general interpolation method is used, the brightness of the reconstruction result is lowered, and noise and afterimages occur. To solve this problem, a hologram was trained with a neural network structure that showed good performance in the single-image super resolution (SISR). As a result, it was possible to improve the problem that occurred in the reconstruction result and increase the resolution. In addition, by adjusting the number of channels to increase performance, the result increased by more than 0.3dB in same training.