Browse > Article
http://dx.doi.org/10.7736/KSPE.2014.31.2.99

An Experimental Study on the Prediction Control Technique for a Magnetic Bearing  

Kim, Chae Sil (Department of Mechanical Engineering, Changwon National Univ.)
Jung, Hoon Hyung (Department of Mechanical Engineering, Graduate School, Changwon National Univ.)
Shin, Min Jae (Technology Center in Thermal Management, Rolls-Royce and Pusan National Univ.)
Publication Information
Abstract
Active vibration control methods are required in the high speed rotor systems supported by magnetic bearings. A prediction control technique is one of the control methods. Gain and phase angle are primarily chosen with analyzing the responses for a certain rotor speed. The feasibility of this technique has been reported for only analytical simulations. Therefore this paper constructs the test rig supported by ball bearings with a magnetic bearing type actuator and develops a prediction control system by using LabVIEW and Compact RIO. Finally as rotating speeds are modulated, the gains and phase angles for the speeds are determined with vibration control of the test rig. This leads that the prediction control technique may be applied to the rotor system with the magnetic bearing.
Keywords
Magnetic bearing; Rotor; Prediction Control; Phase Control Method;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Na, J. B., Lee, W. C., Joung, H. H., Kim, C. S., Kim, S. W., and Kim, K. Y., "Control of the High Speed Flexible-Rotor System using Multi-Body Dynamic Method," Proc. of KSPE Autumn Conference, pp. 265-266, 2006.   과학기술학회마을
2 Kim, C. S., Jung, Y. G., Cho, S. Y., and Jung, H. H., "Vibration Control Simulation for a Multi-Body High Speed Flexible Rotor Model using a Phase Adjusting Method," Proc. of ICROS-SICE International Joint Conference, pp. 2286-2290, 2009.
3 Lee, W. C., Kim, S. W., Kim, J. S., and Choi, H. O., "A Study on the Active Control for Flexible Rotors Using Phase Control Method," Proc. of KSPE Spring Conference, pp. 280-283, 2005.   과학기술학회마을
4 Na, J. B., Kim, S. W., Lee, W. C., and Kim, C. S., "Simulation of Active Vibration Control using Phase Adjusting Method with High Speed Flexible Rotor System," Proc. of KSPE Spring Conference, pp. 425-426, 2006.   과학기술학회마을
5 Jung, H. H., Jo, H. M., Kim, C. S., and Cho, S. Y., "Multi-Body Dynamic Modeling for a Flexible Rotor and Vibration Control using a Novel Phase Adjusting Technique," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 87-92, 2011.
6 Kim, C. S., "Magnetic Bearing Eddy Current Effects on Rotordynamic System Response," Ph.D. Thesis, Mechanical Engineering, Texas A&M University, 1995.
7 Kim, C. S., Lee, J. W., and Park, J. K., "Optimal Design for a Heteropolar Magnetic Bearing considering Nonlinearities," Int. J. Precis. Eng. Manuf., Vol. 3, No. 1, pp. 13-19, 2002.