• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.7-11
• /
• 2010

The reduction of optical losses in mono-crystalline silicon solar cell by surface texturing is a critical step to improve the overall cell efficiency. In this study, we have changed the sub-micrometer structure on the micrometer pyramidal structure by 2-step texturing. The Ag particles were coated on the micrometer pyramid surface in $AgNO_3$ solution, and then the etching with hydrogen fluoride and hydrogen peroxide created even smaller nano-pyramids in these pyramids. As a result, we observed that the changes of size and thickness of nano structure on pyramidal surface were determined by $AgNO_3$ concentration and etching time. Using 2-step texturing, the surface of wafers is etched to resemble the rough surface of a lotus leaf. Lotus surface can reduce average reflectance from 10% to below 3%. This reflectance is less than conventional textured wafer including anti-reflection coating.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.745-746
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.743-744
• /
• 2008

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.850-853
• /
• 2012

반도체 산엽에서 제조공정상의 웨이퍼 가공시에 여러 가지 화학물질을 사용하고 있으며, 제조공정상 유해가스의 발생 빈도수가 높다. 반도체 제품을 생산하기 위한 공정 모니터링 사스템은 관리실에서만 가스 누출여부, 온습도 변화 및 영상을 모니터링 하고 있으며, 관리자가 자리를 비우게 되면, 반도체 제품 생산공정에 발생하는 긴급 상황에 대응하기 어렵다. 본 논문에서는 반도체 공정 모니터링 테스트 베드에서는 반도체 생산 공정의 온도, 습도 및 가스 누출 여부와 같은 주변환경을 모바일에서 모니터링 및 즉각적인 상황 대응이 가능한 공정 모니터링을 연구 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.104-107
• /
• 2005

Recently, according to the development of semiconductor industry, needed to high-integration and high-functionality. These changes are required for silicon wafer of large scale diameter and precision of TTV (Total Thickness variation). So, in this research, suggest that the method of monitoring system is using motor current. This method is needed for observation of silicon wafer grinding process. Motor current sensor is consisted of hall sensor. Hall sensor is known to catching of change of current. Received original signal is converted to the diginal, then, it is calculated RMS values, and then, it is analysed in computer. Generally, the change of force is relative to the change of current, So this reason, in this research tried to monitoring of motor current change, and then, it will be applied to analysis for silicon wafer grinding process. using motor current sensor.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.3
• /
• pp.22-28
• /
• 2020

This paper investigates the effects of retaining ring materials, particularly PPS and PEEK, used in the CMP process, on wafer polishing and ring wear. CMP can be performed using bonded type retaining rings made with PPS or injection molding type retaining rings made with PEEK. In this study, after polishing a wafer with a PPS retaining ring, the average profile height of the wafer was 0.098 ㎛ less than that of the wafer polished with a PEEK retaining ring, implying that PPS retaining rings achieve a higher polishing rate. In addition, the center area of the wafer profile had less deviation and improved flatness after polishing with the PPS ring. These results indicate that a higher polishing rate and smaller profile height deviation can be achieved using retaining rings made with PPS compared to retaining rings made with PEEK. Therefore, with semiconductor circuit patterns becoming finer and wafer sizes becoming larger, the use of PPS in CMP retaining rings can obtain more stable wafer polishing results compared to that of PEEK.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.98.1-98.1
• /
• 2016

PTFE (Polytetrafluoroethylene) 는 벌크 형태는 물론 박막으로도 독특한 특성을 나타내는 물질이다. 매우 낮은 마찰계수, 발수표면특성, 화학적 비반응성은 다양한 방면의 적용이 가능하게 한다. 두께 $1-2{\mu}m$ 이나 50 nm 이하의 박막의 형태로서 발수 특성은 스퍼터링 조건에 따라서는 벌크 PTFE의 특성보다 뛰어나다. 순수한 PTFE 타겟을 사용하여 얇은 PTFE 막 증착을 위해 RF (radio-frequency) 스퍼터링을 하였다. 스퍼터 타겟 건 파워, 공정 압력, 그리고 기판 스테이지와 Si wafer 나 다양한 시편에 인가되는 RF 바이어스 (bias) 등과 같은 스퍼터링 변수의 변화가 가능하다. 공정 변수에 따라서 RF 스퍼터링에 의한 순수한 PTFE 박막과 바이어스가 인가된 유사 PTFE 박막을 비교하여 탐구하였다. 스퍼터링에 의한 PTFE 코팅은 접촉각이 100도 또는 그이상의 초발수성을 나타내는 장점을 갖고 있고, 90% 이상의 높은 투과도를 나타낸다. PTFE 타겟을 사용한 종래의 일반적인 스퍼터링에 의하여, 일예로 실리콘 웨이퍼상에 증착된 코팅막은 낮은 경도와 기판과의 밀착력이 좋지 않은 문제를 갖고 있다. 높은 에너지 환경에서 만들어진 PTFE 코팅은 기존의 스퍼터링 방식으로 만들어진 코팅에 비해 다른 특성을 나타낸다. PTFE 막의 경도와 밀착력을 높이고자 bias를 인가한 RF 스퍼터링을 시도하였다. 코팅 접촉각, 투과도, 나노인덴터에 의한 경도, 그리고 스크래치 테스트에 의한 코팅막의 밀착력을 살펴보았다. PTFE 폴리머 타겟을 사용한 RF 스퍼터링으로 만들어진 고경도 PTFE 유사 코팅의 경도 변화 기구를 고찰하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1385-1392
• /
• 1999

This paper describes the design of the monitoring system for monitoring the current status and indirect controlling of the Wet Station Equipment which is used for cleaning the wafer. Most of the conventional monitoring system depend on the special hardware and software. Basic design goal of monitoring system is provide the convenience for the use and the portability for the system. In order for the system to fulfil its requirements, it was designed using GUI (Graphical User Interface) facility based on the windows NT environment of IBM PC compatible and EtherNet board based on the TCP/IP protocol.

• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.113-118
• /
• 2002

We developed engineering methods to control gas flow in a plasma reactor in order to achieve good etch depth uniformity for large area GaAs etching. Finite difference numerical method was found quite useful for simulation of gas flow distribution in the reactor for dry etching of GaAs. The experimental results in $BCl_3/N_2/SF_6/He$ ICP plasmas confirmed that the simulated data fitted very well with real data. It is noticed that a focus ring could help improve both gas flow and etch uniformity for 150 mm diameter GaAs plasma etch processing. The simulation results showed that optimization of clamp configuration could decrease gas flow uniformity as low as $\pm$ 1.5% on an 100 mm(4 inch) GaAs wafer and $\pm$ 3% for a 150 m(6 inch) wafer with the fixed reactor and electrode, respectively. Comparison between simulated gas flow uniformity and real etch depth distribution data concluded that control of gas flow distribution in the chamber would be significantly important in order or achieve excellent dry etch uniformity of large area GaAs wafers.

• 전자공학회논문지 IE
• /
• v.46 no.3
• /
• pp.26-32
• /
• 2009

The reason of the contamination in the VLSI industry is the electric charge of the wafer itself. We develop the corona discharged system of clearing static electricity with a fan. This system has automatic cleaner of discharging electrode, check the state of jot control a suitable mount of discharged ion, and monitor all state using Zigbee communication module.