• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.109-128
• /
• 2022

The precise inspection for safety and diagnosis (PISD) of tunnel has been conducted by the special act on safety control of public structures. However, the present assessment for the segmental lining of TBM tunnel has limitation such as: NDTs for integrity, segmental configuration for field inspection, and consideration for jacking system. Even if the number of TBM tunnel is less than 1% of enrolled facility in FMS, more attention to maintenance should be necessary due to its usage such as multi-use facility and national important facility. Compared to NATM tunnel, excavated by drilling and blasting and then installed lining by cast-in-place within 6~12 m, TBM tunnel is cut out ground by disk and cutter-bit and then assembled 7 pieces of precast segment, 1.2~1.4 m wide. Different features of design, construction, and maintenance should be considered to be more exact evaluation of TBM tunnel. The characteristics of defect is categorized and analyzed with 11 operational TBM tunnels in domestic subway. To be more comprehend various particular defects, foreign studies have been also adapted. Crack and leakage are categorized in 7 patterns. Breakage/spalling and corrosion are also grouped into 3 patterns. Patterned defects or damages are fed back in design, construction, and are useful guidelines for maintenance stage in future.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.4
• /
• pp.151-158
• /
• 2022

In this study, the waste concrete sample obtained as various particle size (0~2.36 mm) was carried out the basic measurements and carbonation for analyzing the possibility of its carbonation. It was then investigated some analysis such as crystallization (XRD pattern), microstructure (SEM), and the production of CaCO₃ through the ignition loss (TG-DTA). The content of CaCO₃ in the waste concrete sample before carbonation was found in 14.51 % and 28.52 % after carbonation in 24 hours. Moreover, the content of CaCO₃ carbonated in 24 hours with fine grinded waste concrete sample was 32.73 %. The carbonation of the waste concrete sample was rapidly performed up to 6 hours, but gradually increased from 12 to 24 hours. Especially, the amount of CaCO₃ between 12 and 24 hours was only produced 2.32 %. The calcite-shaped CaCO₃ crystals after carbonation of the waste concrete sample were found in microstructure and their peaks were strongly detected on XRD pattern.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.266-274
• /
• 2022

In this study, a smoothing method was applied to improve the accuracy of peak wave period estimation using the water surface elevation observed from the Oceanographic and Meteorological Observation Tower located on the west coast of the Korean Peninsula. Validation of the application of the smoothing method was per- formed using variance of the surface elevation and total amount wave energy, and then the effect on the application of smoothing was analyzed. As a result of the analysis, the correlation coefficient between variance of the surface elevation and total amount wave energy was 0.9994, confirming that there was no problem in applying the method. Thereafter, as a result of reviewing the effect of smoothing, it was found to be reduced by about 4 times compared to the confidence interval of the existing estimated spectrum, confirming that the accuracy of the estimated peak wave period was improved. It was found that there was a statistically significant difference in proba- bility density between 4 and 6 seconds due to the smoothing application. In addition, for optimal smoothing, the appropriate number of smoothings according to the significant wave height range was calculated using a statistical technique, and the number of smoothings was found to increase due to the unstable spectral shape as the significant wave height decreased.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.155-163
• /
• 2023

Real-time monitoring technology is critical for ensuring the safety and reliability of nuclear power plant structures. However, the current seismic monitoring system has limited system identification capabilities such as modal parameter estimation. To obtain global behavior data and dynamic characteristics, multiple sensors must be optimally placed. Although several studies on optimal sensor placement have been conducted, they have primarily focused on civil and mechanical structures. Nuclear power plant structures require robust signals, even at low signal-to-noise ratios, and the robustness of each mode must be assessed separately. This is because the mode contributions of nuclear power plant containment buildings are concentrated in low-order modes. Therefore, this study proposes an optimal sensor placement methodology that can evaluate robustness against noise and the effects of each mode. Indicators, such as auto modal assurance criterion (MAC), cross MAC, and mode shape distribution by node were analyzed, and the suitability of the methodology was verified through numerical analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.559-573
• /
• 2008

In this study, we newly proposed 3-D nonlinear wave driver utilizing the Navier-Stokes Eq. the numerical integration of which is carried out using SPH (Smoothed Particle Hydrodynamics), an internal wave generation with the source function of Gaussian distribution and an energy absorbing layer. For the verification of new 3-D nonlinear wave driver, we numerically simulate the sloshing problem within a parabolic water basin triggered by a Gaussian hump and uniformly inclined water surface by Thacker (1981). It turns out that the qualitative behavior of sloshing caused by relaxing the external force which makes a free surface convex or uniformly inclined is successfully simulated even though phase error is visible and an inundation height shrinks as numerical simulation more proceeds. For the more severe test, we also simulate the nonlinear shoaling and refraction over uniform beach of wedge shape. It is shown that numerically simulated waves are less refracted than the linear counterpart by Hamiltonian ray theory due to nonlinearity, energy dissipation at the bottom and side walls, energy loss induced by breaking, and the hydraulic jump occurring when breaking waves encounter a down-rush by the preceding wave.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.120-129
• /
• 2023

Hanger cable tension is a major response that can determine the integrity and safety of suspension bridges. In general, the vibration method is used to estimate hanger cable tension on operational suspension bridges. It measures natural frequencies from hanger cables and indirectly estimates tension using the geometry conditions of the hanger cables. This study estimated the hanger cable tension of the Palyeong Bridge using a vision-based system. The vision-based system used digital camcorders and tripods considering the convenience and economic efficiency of measurement. Measuring the natural frequencies for high-order modes required for the vibration method is difficult because the hanger cable response measured using the vision-based system is displacement-based. Therefore, this study proposed a back analysis technique for estimating tension using the natural frequencies of low-order modes. Optimization for the back analysis technique was performed by defining the difference between the natural frequencies of hanger cables measured in the field and those calculated using finite element analysis as the objective function. The direct search method that does not require the partial derivatives of the objective function was applied as the optimization method. The reliability and accuracy of the back analysis technique were verified by comparing the tension calculated using the method with that estimated using the vibration method. Tension was accurately estimated using the natural frequencies of low-order modes by applying the back analysis technique.

• Cross-Cultural Studies
• /
• v.42
• /
• pp.7-22
• /
• 2016

Since the Taoyuanming of Confucius an Arcadia (Taohuayuan), utopia imagined in China has continued to this day. Such utopian imagination has been shaped by a variety of literary texts. These works depict the human desires and frustrations that form the utopian imagination. Typically, an Arcadia (Taohuayuan) has been recognized as a symbol of East Asian utopia. An Arcadia (Taohuayuan) anarchism is the utopian character of this small country, based on sensitization of the Lao strong. An Arcadia (Taohuayuan) world ruling class does not exist. But Confucius thought a utopian world is possible to imagine on the premise of 'Virtuous Policy' (德治). By the late Qing Dynasty (淸末), Kangyouwei (康有爲) had written and presented a utopia realized through the system of the "East-West stand." The literary text on utopia information in continued to experiment with implementation of the 'imagined' in the literature as "reality" of everyday life, immediately following the 1911 revolution in the People's Republic of China. As an Avant garde writer, Gefei's "Renmiantaohua" was influenced by the reflexive nature of the report on the point of the experiment. Gefei's "Renmiantaohua" has been rated as an outstanding work depicting the implementation process and the frustration of the utopian imagination. He is an inspiration to vanguard artists who focus on the desire and the frustration of the utopian imagination through the "Renmiantaohua" myths and stories that are comparable to the Sijipuseu story, which in itself perpetuates utopia in literature. In this paper, we explored the trails to implementation of a utopian imagination that has persisted since the ancient Chinese in current literary text. An Arcadia (Taohuayuan) of Confucius and Taoyuanming accompanied Gefei in the 21st century in describing the process of desire and frustration to realize utopia through a variety of traditional shape figures among other favorites. The author interprets those frustrations and desires of the human life course as just utopian imagination.

• Clinical and Experimental Pediatrics
• /
• v.51 no.1
• /
• pp.54-61
• /
• 2008

Purpose : This study was designed to clarify the mechanism of proteinuria in nephrotic syndrome patients by using puromycin aminonucleoside (PAN) nephrosis model. Methods : Following administration of various concentrations of PAN and antioxidants we observed the changes of podocyte cytoskeletons in cultured rat glomerular epithelial cells (GEpC) by method of scanning electron microscope, reactive oxyten species (ROS) analysis, permeability assay, confocal microscope, and Western blot assay. Results : PAN not only induced the ultrastructural changes of GEpC, such as shortening and fusion of microvilli, but also separated the intercellular gaps and linear ZO-1. PAN induced oxidative stresses in time and dose dependent manners and increases of intercellular permeability in anti-oxidants inhibitable manners. High concentration of PAN induced not only actin polymerization and disorganization, but also the conglomerulation and internal dislocation of ${\alpha}-actinin$ protein. The intensities of fluorescences of ZO-1 protein were diminished and internalized by PAN in a dose-dependent manner, which were inhibited by anti anti-oxidants. Conclusion : PAN induced the changes of podocytes cytoskeleton and junctional barriers by way of increasing ROS in GEpC that resulted in increasing their permeability in a antioxidatn-inhibitable manner. Glomerular hyperpermeability induced by PAN mediateing through oxidative stresses is thought to take part in the mechanism of proteinuria in nephrotic syndrome.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.81-92
• /
• 2011

The rheological properties of Wyoming bentonites are strongly influenced by the size of particles, cation exchangeable capacity, arrangement and morphology of clay mineral. This paper presents the results of rheological investigations on the Wyoming bentonites aqueous dispersions: two types of particle flocculation were considered. For the Wyoming bentonite, 0g/L and 30g/L NaCl equivalent salinity were added in fresh and salt water to examine the rheological behavior. This paper examined the general rheological characteristics, compatibility of rheological models and correlation between soil structure and change in rheological properties of Wyoming bentonite caused by increasing salinity. From flow curves of bentonites hydrated with fresh water and salt water, the observed general flow behavior is very close to shear thinning with yield stress (or ideal Bingham fluid with yield stress and plastic viscosity). However, the change of shear stress at the same shear rate is clear, particularly for lower shear rate. Well-known rheological models are used to fit the data. There is a good agreement between rheological model and data: Carreau, Herschel-Bulkley and power-law for S=0g/L and bilinear, Herschel-Bulkley and power-law for S=30g/L. It may be due to the fact that the internal structural bonding (strong modification of particle-particle interactions from edge-to-edge and/or edge-to-face to face-to-face) in soil matrix is affected from the evolution of rheological properties with different salinities.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.23-31
• /
• 2007

In this study, the crystallization of neodymium carbonate from neodymium chloride solution by addition of ammonium bicarbonate was investigated. The concentration of reactants such as neodymium chloride and ammonium bicarbonate, and reaction temperature play an important part in order to obtain the crystal of neodymium carbonate. It seemed that amorphous neodymium carbonate was prepared by aggregation of primary particles formed through nucleation. If reaction rate was increased by increasing the concentration of reactants and reaction temperature, then neodymium carbonate crystal could be obtained. Lanthanite-type neodymium carbonate[$Nd_2(CO_3)_3{\cdot}8H_2O$] and tengerite-type neodymium carbonate[$Nd_2(CO_3)_3{\cdot}2.5H_2O$] could be obtained with reaction renditions. Lanthanite-type neodymium carbonate was sensitive to temperature. The thermal decomposition of neodymium carbonate contained the processes or dehydration, decarbonation and crystalization of $Nd_2O_3$. The shape of lanthanite-type neodymium carbonate was irregular lump type, and tengerite-type neodymium carbonate had the shape of needle type. The shape of $Nd_2O_3$ was affected by the shape of neodymium carbonate.