• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.269-275
• /
• 2017

The aeroelastic stability of a fighter type aircraft can be severly affected by the store mass, aerodynamic characteristics, and store combinations. Hence, the stability for the all store configurations must be substantiated before the aircraft in service. For the aeroelastic analysis, the design data and information for the aircraft structure, mass distribution, control surface characteristics, and external shape etc. are required. This is the reason that the store compatibility substantiations by a third party are restricted. However, according to the change of operational environment or the improvement of avionic technology, a new external store is developed and it should be installed on an aircraft without the support from the original supplier. This paper describe the process to substantiate the aeroelastic compatibility between a new external store and an imported aircraft whose design data is not available to a third party operating the aircraft.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.549-558
• /
• 2014

Buckling restrained braces(BRBs) developed as a seismic protection element, hysteretic damper, have been investigated in America and Japan mainly. BRBs are composed of a steel core and concrete-filled steel casing. It is one of the major causes of drop in productivity to fill the steel casing with concrete. To improve this problem, the BRB is introduced in which the steel core is restrained with a pair of semicircular springs. In this paper, the numerical and analytical investigation about the desirable configuration for a semicircular spring is presented. Firstly, the stiffness and strength of semicircular spring is determined theoretically to buckle into a very high-order modes. Then, the required stiffness and strength are calculated under the practical design conditions and considered as reference values to find a proper configuration. The material strength and thickness of semicircular spring are chose from the finite element analysis for 5 semicircular springs with varying height. Finally, the nonlinear buckling analysis of BRB with proper semicircular springs shows that the bucking strength of the whole BRB is very similar to the strength of steel core with length between semicircular springs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.130-135
• /
• 2019

This study performed the quality improvement of a red dot sight for a 40 mm grenade launcher through parallax reduction. The red dot sight cited in this study is currently in mass production for military use as a non-weapon system. While the red dot sight's parallax currently meets requirements, slightly greater error was observed on the outside of effective optical area of the reflection lens compared to other sights. Parallax is easily affected by eye movement, which can result in aiming error. To improve the red dot sight's quality, this study analyzed why parallax is observed in the effective optical area of the reflection lens and how to reduce it. As a result, the red dot sight demonstrated lower parallax error using the new optical system design with an increased reflection lens thickness and modified components configuration related to the reflection lens assembly. Parallax was calculated and simulated by using a particular program to verify that it decreased. This improvement for the 40 mm. grenade launcher red dot sight more than satisfies requirements, offers advanced capabilities for users, and as a result, successful operation carryout.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.1
• /
• pp.39-44
• /
• 2013

This study evaluated the effect of fluid flow on the power density in a horizontal-flow microbial fuel cell (MFC). The maximum power densities in four types of flow induced by different channel types in the anode chamber were investigated. The fluid flow at each channel was analyzed using tracer tests. Results of polarization curves showed that the maximum power densities of case 1, 2, 3 and 4 were 95.7, 129.1, 190.9 and 114.2 mW/m2, respectively. Case 3 with a set of guide walls where flow had an S type-like shape showed the highest power density. Based on the Morrill Dispersion Index (MDI) value of case 4, microbial activity would be enhanced since the reactor allows even distribution of substrate but the overflow occurrence would not guarantee stable performance. Therefore, case 3 could be an effective reactor type for MFC because of high electricity generation and stable performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.692-700
• /
• 2014

In this work, satellite FE (finite element) model updating for the prediction of the effect of micro-vibration is described. In the case of satellites launched in low earth orbit, high agility and more mission accomplishments are required by the customer in order to procure many images from satellites. To achieve the goal, many mechanisms, including high capacity wheels and antennas with multi-axis gimbals have been widely adopted, but they become a source of micro-vibration which could significantly deteriorate the quality of images. To investigate the effect due to the micro-vibration in orbit on the ground, a prediction is conducted through an integrated model coupling the measured jitter sources with FE (finite element) model. Before prediction, the FE model is updated to match simulation results with the modal survey test. Subsequently, the quality of FE model is evaluated in terms of frequency deviation error, the resemblance of mode shapes and FRFs (frequency response functions) between test and analysis.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.04a
• /
• pp.9-10
• /
• 2001

용융공정 $YBa_2Cu_3O_{7-x}$(123) 초전도체는 고자장 하에서도 통전특성이 우수하다 그러나 123 초전도체에는 미세균열이나 기공과 같이 초전도체의 통전특성에 유해 한 요인들도 다수 포함된다. 미세균열은 고온 정방정 상이 저온 사방정상으로 상변 태 시 발생하는 웅력에 의해 생성된다. 반면, 기공은 123 성형체를 녹이는 과정에서 123 상에 포함된 산소원자들이 격자로부터 이탈되고, 이 산소원자들이 모여 액상에서 기공을 형성한다. 제조공정에 따라 기공의 크기와 밀도가 다르지만 대략 수십 이크론 정도로 대단히 크다 생성된 기공 중 일부는 열처리 중에 소멸되나, 어떤 것들은 그대로 남아 초전도체의 치밀화를 방해한다. 본 연구에서는 123의 용융 및 $YBa_2Cu_3O_{7-x}$(211)과 액상으로의 분해 과정 및 포정반응과 관련된 미세조직을 조사하여 기공생성과 소멸과정을 조사하였고, 123의 최종 미세조직에 대한 기공의 영향에 대 하여 연구하였다. 열처리 스케쥴은 123-211-액상의 그림 l의 2원 상태도를 기초로 하여 결정하였다. 먼저 부분 용융상태에서의 기공의 분포를 알고자 시편을 105$0^{\circ}C$에서 0.5-1 시 간 유지한 후, 액체 질소통에 넣어 냉각하였다 (그림 2의 열처리 경로 CD)$\circled1$부분 용 융상태에서 급랭할 경우 211과 액상 상태가 그대로 유지되므로 액상에서의 기공분 포를 관찰할 수 있다. 또 다른 시편들은 그림 2의 @$\circled2$경로로 열처리하였다. 이 시편에서는 고온에서 생성된 211과 액상이 반웅하여 123 결정이 생성, 성장하므로 123 결정립 내의 기공분포를 알 수 있다. 그림 3은 시편에서의 기공과 액상포켓의 분포를 모식도와 각 부위의 미세조직 사진이다. 시편에는 산소가스 발생으로 인해 생성된 수형의 기공이 관찰된다. 기공은 시편의 중앙에 집중되며, 시편 바깥부분은 기공에 액상이 채워진 액상포켓이 관찰된다. 기공의 생성과 소멸과정은 다음과 같다. 출발물질인 123 분말이 211과 액상으로 분해될 때 산소가스가 배출되며, 이로 인해 액상에서 구형의 기공이 생성된다. 이들 중 일부는 액상으로 채워져 소멸되나, 나머지는 그대로 남는다. 특히, 시편 중앙에 서는 수십-수백 마이크론 크기의 커다란 기공이 다수 관찰된는데, 이는 기공의 합체로 만들어진 것이다. 포정반응 열처리 시 기공 소멸로 만들어진 액상포켓들은 주변 211 입자와 반응하여 123 영역으로 변한다. 이곳은 다른 지역과 비교하여 211 밀도 가 낮기 때문에, 미반응 액상이 남거나 211 밀도가 낮은 123 영역이 된다. 액상으로 채워지지 못한 구형의 기공들 중 다수가 123 결정 내로 포획되며, 그 형상은 액상/ 기공/고상 계면에너지에 의해 결정된다.

• Cartoon and Animation Studies
• /
• s.38
• /
• pp.115-132
• /
• 2015

An animation is a tool to represent the consciousness of an author. It is a medium that converts his/her consciousness to time by the means of spaces. Image is the most inherent element among the elements of an animation. Character is the element that has the very core function among the elements of an image because a character is a shape that can deliver a story through various actions and facial expressions. In this context, is a representative satire animation that describes a ranked and unequal human society and selfishness and absurdity of human beings existed in the human society, based on the original work of George Orwell. Therefore, this study aims to study what the work tries to satirize through the meanings and symbols that the characters, animals, and spaces in the work. As a result of the study, it was found that the characters appeared in the work are metaphoric symbols that imply the meanings of each character, not just simple characters or spaces. In the work, the farm is a symbolic space that symbolizes a human world. John, a human being, is described as a dictator in an absolute Russian monarchy who suppresses people. Old Major, a pig, is described as an old pioneer that preaches the appropriation of a revolution while Snow Ball, a pig that follows the Major is described as a naive leader that dreams to establish a real socialist state where everybody lives equal, through successful revolution. Another pig, Napoleon is described as the more greedy dictator than human being. He killed Snow Ball for his private ambition and suppresses and exploits the same race, animals. That is, setting man and various animals in the relation of dominant class and subordinated class, the author generates conflicts among characters. Although the characters pursue an ideal society through revolution, it requires another revolution in the process, which expresses repetitive contradiction of human history in a symbolic and strong way.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.135-146
• /
• 2015

To provide the data necessary to determine the design wind speed for calculating the wind load acting on a greenhouse, we measured the wind speed below 10m height and analyzed the power law exponents at Buan and Gunwi. A wind speed greater than $5m{\cdot}s^{-1}$ is appropriate for calculating the power law exponent necessary to determine the wind speed distribution function according to height. We observed that the wind speed increased according to a power law function with increased height at Buan, showing a similar trend to the RDC and JGHA standards. Therefore, this result should be applied when determining the power law function for calculating the design wind speed of the greenhouse structure. The ordinary trend is that if terrain roughness increases the value of power law exponent also increases, but in the case of Gunwi the value of power law exponent was 0.06, which shows contrary value than that of the ordinary trend. This contrary trend was due to the elevations difference of 2m between tower installed and surrounding area, which cause contraction in streamline. The power law exponent started to decrease at 7 am, stopped decreasing and started to increase at 3 pm, and stopped increasing and remained constant at 12 pm at Buan. These changes correspond to the general change trends of the power law exponent. The calculated value of the shape parameter for Buan was 1.51, confirming that the wind characteristics at Buan, a reclaimed area near the coast, were similar to those of coastal areas in Jeju.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.699-704
• /
• 2018

One-dimensional nanostructures have attracted increasing attention because of their unique electronic, optical, optoelectrical, and electrochemical properties on account of their large surface-to-volume ratio and quantum confinement effect. Vertically grown nanowires have a large surface-to-volume ratio. The vapor-liquid-solid (VLS) process has attracted considerable attention for its self-alignment capability during the growth of nanostructures. In this study, vertically aligned silicon oxide nano-pillars were grown on Si\$SiO_2$(300 nm)\Pt substrates using two-zone thermal chemical vapor deposition system via the VLS process. The morphology and crystallographic properties of the grown silicon oxide nano-pillars were investigated by field emission scanning electron microscopy and transmission electron microscopy. The diameter and length of the grown silicon oxide nano-pillars were found to be dependent on the catalyst films. The body of the silicon oxide nano-pillars exhibited an amorphous phase, which is consisted with Si and O. The head of the silicon oxide nano-pillars was a crystalline phase, which is consisted with Si, O, Pt, and Ti. The vertical alignment of the silicon oxide nano-pillars was attributed to the preferred crystalline orientation of the catalyst Pt/Ti alloy. The vertically aligned silicon oxide nano-pillars are expected to be applied as a functional nano-material.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.400-406
• /
• 2017

The model used in this study was reversed to analyze the cause of excessive damage that occurred inside the rotating system and pipe system of a centrifugal-type seawater pump on a ship. For this purpose, internal flow analysis on a cooling seawater pump was performed using CFD. As a result, the shape and boundary conditions of the target pump were set by reverse engineering, and pump efficiency at a design operating point of $125m^3/h$ was calculated as 85.3 % with a head of 32.0 m. The maximum efficiency point of the target pump was estimated to be 86.2 % at $150m^3/h$, but this differed from the actual operating point. At $112.5m^3/h$, which was the lowest flow point, flow was unstable due to the characteristics of the low flow point and analysis convergence was not good. The purpose of this study was to clarify the cause of ongoing cavitation in seawater pumps and piping systems in operation. Future research will be needed to clarify causes for pipe systems in the future by performing calculations for the total piping system of an inlet and outlet, in addition to measuring the flow rate of each branch pipe.