• Spatial Information Research
• /
• v.11 no.4
• /
• pp.421-437
• /
• 2003

In order to calculate the position of parcel boundary points, the area of the Parcel, and the length of the parcel boundary lines using a digitalized cadastral map or maps, the distortion of the map has to be corrected. The correction methods, such as the method of 2D affine transformation using 4 comer points of the edge lines, the method of tessellation into 9 subregions, the method of using the original surveying sheets, and the method of straightening the 4 edge lines, have been developed. In this Paper, the four methods were programed and applied to some sample cadastral maps and the correction accuracies were obtained and analysed. No method could prefectly correct the distortions because the distortions were irregular throughout the maps. However, it is found that tile method of straightening the 4 edge lines is the one which can minimize the distortions when the method is applied after applying the 2D projective transformation on the maps using the 4 comer points of the edges.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.156-162
• /
• 2012

This paper presents differences of road traffic noise maps were generated by using the draft map and two digital maps with different versions. As a first step, the calculation of the areas of excessive noise exposure was made for the draft map and each digital map version. Subsequently, the areas of excessive noise exposure were compared so as to determine how different from each other. Then, comparison of the populations exposed to excessive noise was also conducted in the same way. It was found that the most accurate noise map was obtained when using the combination of the draft map containing all attribute information and the digital map Ver 2.0. This result indicates that more information on the height and the number of floors of the individual building is required in order to obtain more accurate population exposed to excessive noise, thus creating a more accurate noise map.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.180-181
• /
• 2023

2022년 1월 「중대재해처벌법」시행 후 기업에서 경영책임자로써의 안전보건확보 의무에 대한 책임이 강화되어 건설산업에서는 안전보건관리체계를 구축하고 이행 확인 활동을 통하여 중대산업재해예방에 노력하고 있다. 동법 시행령 제4조 제9호에서 요구하는 안전보건 역량을 평가하여 업체를 선정할 수 있는 기준과 절차 즉'적격수급업체 선정체계'가 중대산업재해 예방에 핵심과제라 할 수 있으며, 이를 위해서는 안전보건수준을 평가할 수 있는 시스템이 필요하다. 이에 건설업에서 민간기업 스스로 적격수급업체 선정을 위한 안전보건수준평가를 운영하고 있으나 전문성과 신뢰성이 부족하다. 또한 민간 건설업체마다 안전보건수준 평가방법이 명확하지 않고 표준화 되어 있지 않아 하수급업체에서는 입찰마다 평가 수검을 받고 있어 효율성이 낮게 나타나고 있다. 본 연구는 선행연구 고찰과 공공기관에서 운영되고 있는 건설업 원도급사에 관한 안전 평가제도 실태조사를 통하여 하수급업체 안전보건수준평가 인증제도의 필요성을 확인하였다. 이에 건설업의 적격수급업체 선정체계 운영이 필요한 표준화된 안전보건수준 인증제도 도입 방안을 제시하기 위함이다.

• Land and Housing Review
• /
• v.12 no.4
• /
• pp.81-92
• /
• 2021

This study investigates whether urban expansion can act as a cause of the decline of the original city center through the Space Syntax methodology. The urban spatial structure analysis was conducted targeting the downtown area of Jeju-eupseong. The time points for longitudinal analysis were set at five points between 1914 and 2021 including the Japanese colonial period when the cadastral map was drawn up in Jeju City, and the urban spatial structure was analyzed and compared for each time point. ASA (Angular Segment Analysis) was used as a technique for urban spatial structure analysis. This study shows that urban expansion is a cause of the decline of the original downtown. The original city center has moved away from the center as the urban structural change due to the urban expansion. The urban structure of the eastern part of Jeju City has undergone a major transformation between 1914 and 2021. As the old Jeju area where the original city center was located is geographically in contact with the sea, urban sprawl has been made toward Halla Mountain and further to the south of Jeju. Accordingly, the city center has transformed from a monocentric to a polycentric structure. Due to the dynamics of the urban sprawl, the old downtown of Jeju became one of the peripheral neighbourhoods in the Greater Metropolitan of Jeju.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.42-54
• /
• 2012

The main purpose of this study is to suggest the spatial statistical approach suitable for the delimitation of Busan CBD. For this purpose, Getis-Ord $G_i^*$ and both of IDW (Inverse Distance Weight) and FDB(Fixed Distance Band) were applied to delimit the CBD boundary. And then, the results of the CBD boundary were compared and verified with the methodologies of the previous studies. The result of IDW accorded with the previous study relating to the delimitation of the boundary of CBD, and the result of FDB was reflecting the characteristics of the mixed-use residential of a transition zone. As a result of the land use quotient, the mixed land use of residential and commercial was highly specialized in the boundary of FDB. These results will be able to support the understanding of urban spatial structure and the effective CBD management.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.31-41
• /
• 2005

In order to carry out aerial photogrammetry using GPS/INS, it is necessary to apply exterior orientation parameters, obtained while making a photo, to the editing process. It should be noted that the verification process of aerial mapping result is the most crucial process at the GPS/INS based digital photogrammetry. To this end, this study has compared the mapping result by the ways of AT results, plotter, and orientation, which is from basis of the Analytical raw map produced by the existing AT results. When comparing the horizontal and vertical accuracy of the analytical mapping with that of digital restitution, it could be found that the latter is more accurate than that of the former. In addition, it was reveled that the horizontal error was bigger than that of vertical one. Even though the accuracy of the GPS/INS based AT Direct orientation was three times poorer than the of indirect one, it was recognized that the photogrammetry process was effectively performed in the application of scale 1:5000 mapping with satisfying the allowance errors.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.23-29
• /
• 2002

The design of data processing of GIS requires efficient method with analysis procedure. This system is easy to be used and managed for presenting route according to conditions as a graphic user interface environmental window system by applying three tiers based object-oriented method. The tier of data is in charge of a class for the exchange, extraction and conservation of data between GeoMedia and application tiers. A route selection algorithm was applied to application tiers, considering all conditions which are necessary for the route selection between a beginning point and an end point, and it was added by module such as data handing, road condition, buffering, clothoid and AHP to select the alternative route followed by new condition. The user tier can express the data acquired by an application tier. Thus three tiers based architecture was presented by implementing design of GIB data processing for its efficiency.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.79-85
• /
• 2019

The policy introduced recently in order to promote small-size reconstruction housing projects for rehabilitating downtown area consists of aged multi houses has been little practiced, as preferential provisions for such projects are more likely applicable for large projects. Several expert interviews and surveys were conducted to find efficient clauses to overcome the problems and their relative weights. As the results, it is revealed that 'relation of floor area ratio' and 'relaxation of building height limit criteria' are the most effective whereas 'purchasing and operating of residents' common facilities with public fund' is little. The study results would be a great interests for public institutions to rebuild aged housing area without destroying local communities and to provide socially disadvantaged class with rental housing at the same time.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.4
• /
• pp.103-111
• /
• 2018

The Soswaewon Garden, which was constructed by Yang San-Bo around 1520, is a private traditional garden in Korea. Soswaewon Garden has long been and still is the focus of continuous research. However, relatively few studies have been conducted on the restoration of buildings that were lost in the past. The Goam-Jeongsa and Boohwondang buildings, which were lost in 1597 during the Japanese invasion, were restored in 1614 and depicted in a picture of Soswaewon Garden in 1755. However, they eventually disappeared and no longer exist in the present. Therefore, the restoration of these two buildings is considered an urgent task. This research aims to search for the original location of these buildings and estimate their size and shape in terms of physical space. Several years ago, an estimation of the building site was carried out, providing a stepping stone on this matter. This can be studied through "Soswaewon's 48 quatrains with five Chinese characters in each line," "Soswaewon-sasil," and "Soswaewon's drawing." Some parts of the shape of Soswaewon also appear in the "Yuseoseokrok," which is helpful. Thus, in this research, information on the Goam-Jeongsa and Boowondang buildings appearing in research results and literature to date are collectively analyzed. The location and architectural features of both buildings are identified by focusing on excavations. Also, for the purpose of restoration planning, base data on the location, size, and shape of both buildings are presented. In line with this process, a valid restoration plan is presented by analyzing the abovementioned historical research materials and comparing empirical data, such as excavation results.

• Journal of The Korean Association For Science Education
• /
• v.39 no.2
• /
• pp.263-277
• /
• 2019

This study analyzed the current use of science-related test tools in affective area in Korean academic journals for the last 30 years since 1989 and the cases of modification of the original tools related to the tools. This provides practical information on the development and improvement of test tools in the future and offers the basis for developing valid test tools. The study was conducted in two stages. We analyzed the status of 88 domestic science education researches dealing with testing tools related affective characteristics and 57 domestic and foreign resource tools referenced by them. After that, we compared the characteristics of the five cases in which the original tool was revised and the concrete item correction examples. The results were analyzed as follows: topics that have emerged continuously or that have recently begun to appear in domestic research, the research situations according to their purpose and measurement methods used by the tool, and use state of original tools. The background and key points of revision were analyzed for the five tools, TOSRA, SAI, PISA items, STEBI-A/B, SMQ, whose revision process were disclosed. In addition, the changes of the items were analyzed by comparing the four test items with the questions before and after the revision. As a result of item analysis, item improvement was proceeding in the direction of enhancing readability, clarifying meaning, and changing items according to change of sub constructs. The implications of this study are as follows: notes on interpreting the results obtained from the tool with multiple mixed constructs, the possibility of the testing tool that broadens the horizon of the research, error recognition in the subjective self-report, and notes when applying test tools from other disciplines to science.