• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2507-2509
• /
• 2002

본 논문에서는 유리 용해로의 온도 제어를 위한 동역학 행렬 제어 (Dynamic Matrix Control, DMC) 기법의 적용 사례를 소개한다. 다양한 제약조건들과 긴 시간지연 응답을 갖는 유리 용해로는 DMC외 좋은 적용 분야가 될 수 있다. 먼저 용해로 테스트를 통하여 입출력 데이터를 생성하고 이를 바탕으로 용해로의 동역학 행렬 모델을 결정한다. 그 후, 모의 실험을 통하여 제어기의 설계변수들을 결정한다. 마지막으로, 제시된 제어기를 실제 용해로 생산 공정에 적용된 결과를 제시한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.953-959
• /
• 2013

In this study, a multibody dynamic model of the cervical spine was developed for a virtual in-vitro cadaveric experiment. The dynamic cervical spine model was reconstructed based on Korean CT images and the material properties of joints and soft tissue obtained from in-vitro experimental literature. The model was validated by comparing the inter-segmental rotation, multi-segmental rotations, load-displacement behavior, ligament force, and facet contact force with the published in-vitro experimental data. The results from the model were similar to published experimental data. The developed dynamic model of the cervical spine can be useful for injury analysis to predict the loads and deformations of the individual soft-tissue elements as well as for virtual in-vitro cadaveric experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.315-320
• /
• 2012

Generally circuit devices of low voltage are as follows, ICCB, PCB and MCCB. Among them, MCCB is typically used because it has superior characteristics which fuses do not possess, such as safety, controllability and ability to collaborate with other devices. The MCCB plays vital role, it has to trip instantaneously when the fault is occurred as well as it must have high insulation capacity. Therefore in order to enhance the breaking capacity, the study of contact construction, contact tip and link are necessary. This paper shows dynamic modeling of mechanism part of MCCB using an exclusive analysis program, and embodies the research of improvement of mechanism performance.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.379-382
• /
• 2024

본 논문에서는 위치기반 동역학(Position based dynamics, PBD)을 기반으로 하는 프레임워크를 활용하여 풍선 내 공기로 의한 표면의 회전과 변형을 효율적으로 표현할 수 있는 새로운 방법을 제안한다. 기존의 경우 볼륨 형태인 다면체 메쉬(Tetrahedral mesh)를 활용하여 표면 내부를 모델링 하거나 입자 기반의 유체 시뮬레이션을 통하여 공기역학을 계산해야 되지만, 각각의 동역학뿐만 아니라 상호작용까지 고려해야 되기 때문에 계산양이 커서 다양한 분야에서 활용하기 어렵다. 본 논문에서는 이 문제를 효율적으로 풀어내기 위해 공기의 움직임을 파악하기 위한 유체 시뮬레이션을 계산하지 않고도, 풍선 내 바람에 의한 표면 수축 및 확장을 PBD기반으로 풀어내고, 공기가 빠질 때 나타나는 표면의 회전을 효율적으로 계산할 수 있다. 본 논문에서 제안하는 방법은 정점(Vertex)의 개수가 많은 모델에서도 실시간 처리되는 결과를 보여 줄 수 있기 때문에 게임뿐만 아니라 실시간을 요구하는 물리기반 가상환경 구축에 활용될 수 있다.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.180.1-180.1
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1023-1028
• /
• 2010

Recently, an intelligent service robot is being developed for use in guiding and providing information to visitors about the building at public institutions. The intelligent robot has a sensor at the bottom to recognize its location. Four wheels, which are arranged in the form of a lozenge, support the robot. This robot cannot be operated on uneven ground because its driving parts are attached to its main body that contains the important internal components. Continuous impact with the ground can change the precise positions of the components and weaken the connection between each structural part. In this paper, the design of the suspension system for such a robot is described. The dynamic model of the robot is created, and the driving characteristics of the robot with the designed suspension system are simulated. Additionally, the suspension system is optimized to reduce the impact for the robot components.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.2
• /
• pp.119-127
• /
• 2012

A wire rope is comprised of several metal wires which are wound together like a helix and it can resist relatively large axial loads, as compared with bending and torsional loads. A shipbuilding crane for erection such as a floating crane, a gantry crane, and a crawler crane hoists up and down heavy blocks by using these wire ropes. Thus, it is necessary to find dynamic properties of a wire rope in order to safely lift the blocks using the crane. In this study, a formula for calculating the tension and torsional moment acting on wire ropes of the crane was derived based on the existing study, and then dynamic simulation of the crane was performed based on the formula. The result shows that the dynamic simulation can be applied to find the safe method for block erection of shipyards.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.119-127
• /
• 2013

Borosilicate glass dissolution is an important chemical process that impacts the glass durability as nuclear waste form that may be used for high-level radioactive waste disposal. Experiments reported that the glass dissolution rates are strongly dependent on the bulk composition. Because some relationship exists between glass composition and molecular-structure distribution (e.g., non-bridging oxygen content of $SiO_4$ unit and averaged coordination number of B), the composition-dependent dissolution rates are attributed to the bulk structural changes corresponding to the compositional variation. We examined Na borosilicate glass structures by performing classical molecular dynamics (MD) simulations for four different chemical compositions ($xNa_2O{\cdot}B_2O_3{\cdot}ySiO_2$). Our MD simulations demonstrate that glass surfaces have significantly different chemical compositions and structures from the bulk glasses. Because glass surfaces forming an interface with solution are most likely the first dissolution-reaction occurring areas, the current MD result simply that composition-dependent glass dissolution behaviors should be understood by surface structural change upon the chemical composition change.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.687-696
• /
• 2019

To identify the driving dynamic characteristics of the Tractor-Trailer Type Transporter for mounting a large scale precision equipment, real vehicle driving tests on the 3 inch-bump-space-road were performed. And using general Dynamics Analysis Program - RecurDyn(V8R5), Dynamics M&S were carried out assuming the similar condition with real tests. Then the acceleration data obtained from real tests and M&S were analyzed and compared with each other in the part of root-mean-square-acceleration($g_{rms}$), peak-acceleration($g_{peak}$) and frequencies. In simple view of the $g_{rms}$ & $g_{peak}$, although the results of MRBD are more similar to ones of the real vehicle driving tests, but the results of RFlex have more information to get various useful dynamic characteristics.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.206-209
• /
• 2001

This paper contains the development procedure of small-scaled composite rotor blade for helicopter hingeless rotor system. Composite blade design is conducted by using CORDAS program developed by KARI and dynamic analysis is conducted by using Flightlab which is commercial software for helicopter analysis. Also the optimizing procedure of iterative design was described. The designed composite blades were manufactured after establishing the effective curing method. Through this research, the experiences of composite rotor blade development were accumulated and will be applied to the related research field.