• 선박안전
• /
• 제16권
• /
• pp.8-13
• /
• 2004

본선은 국내 최초로 선박검사기술협회의 제조검사를 마친 11톤급 상동형 세일링 요트로 호주 Jeff Schionning Design 사에서 선박임대와 분양사업의 목적으로 설계하고 (주)신화마린테크에서 13개월에 걸쳐 Mouldless 공법을 통해 건조한 본격적인 레저선박이다.

• 대한조선학회지
• /
• 제50권3호
• /
• pp.17-21
• /
• 2013

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.220-226
• /
• 2000

In this paper, a primitive study of yacht is carried out and an attempt to design a typical yacht is pursuited. General characteristics and types of a yacht is examined and the 1st step to design process is outlined. A model ship of an environmental adaptive yacht is presented and principal dimensions of the yacht is decided.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.64-73
• /
• 2007

Turbulent flows around yacht sails were calculated to access the applicability of CFD for yacht design. Multi-block grid system was generated by using Gridgen package and Fluent was used to calculate flows around two sail system. A 30ft class sailing yacht designed and tested by KRISO was chosen. The interference effect between main and jib sails was analyzed. Pressure distribution on the sails was obtained and the center of effort was estimated. It was found that the jib angle affects the flow phenomena around a main sail due to the change of inflow angle. The location of center of effort is much different from the empirical formula based on a simple geometrical consideration. The calculated results are compared with the previous numerical and experimental results. Both CFD results are similar, but there are some discrepancies with experimental data. However, it is certain that CFD can be a very useful tool for yacht design.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.24-33
• /
• 2005

It is important to understand the flow characteristics around two sails of a sloop yacht. In this paper a computational aerodynamic investigation is performed over sail-like airfoils similar to the main and iIb sails of a 30 feet sailing yacht. Lift and drag are calculated for various conditions of slit distance between the two sails and overlapped length of the jib sail. The thrust and CE(center of effort) of the sail system are obtained. It is found that the combination of two sails produces the thrust force larger than the sum of the thrust force of each sail standing separately and the slit distance of the two sails are important factor to increase lift force.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.477-486
• /
• 2010

During sailing by wind-driven thrust on the sail, a catamaran sailing yacht generates leeway and heeling. For predicting sail force, a model test was carried out according to running attitude. Through the model test, drag and side force of the real ship was predicted. A purpose of this study is to find sail force to C.E from changed attitude during running direction. By balance of hull and sail, a heeling force of designed sail is predicted. Also through heeling force and driving force, total sail force and direction from C.E are considered with changed mast including leeway and heeling.

• 한국항해항만학회지
• /
• 제30권5호
• /
• pp.375-379
• /
• 2006

세일링요트의 추진시 횡류를 방지하기 위하여 선체 하부에 킬을 부착하게 되는데 이는 세일의 양력에 의한 횡흐름을 멈추게 하는 역할과 힐 모멘트를 없애고 복원력을 생기게 한다. 이는 안전성에 영향을 미치기 때문에 적절한 킬의 선택은 중요하다고 할 수 있다. 또한 킬 하부에 부가물의 부착은 발라스트 중량중심을 낮춤으로서 선체 복원력에 중요한 영향을 미치므로 킬에 대한 최적형상 도출은 매우 중요하다. 이에, 본 연구에서는 저항성능 향상을 위한 동일 침수표면적의 핀킬 하부 부가물에 따른 저항특성을 비교 실험하였다. 실험방법으로는 회류 수조를 이용하여 3가지 핀킬 하부 부가물 모형킬을 모형선에 부착하여 형상별 저항특성을 비교 분석하였다. 분석 결과에 따른 저항감소 최적 형상을 도출 하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.235-239
• /
• 2006

세일링요트의 추진시 횡류를 방지하기 위하여 선체 하부에 킬을 부착하게 되는데 이는 세일의 양력에 의한 횡흐름을 멈추게 하는 역할과 힐 모멘트를 없애고 복원력을 생기게 한다. 이는 안전성에 영향을 미치기 때문에 적절한 킬의 선택은 중요하다고 할 수 있다. 또한 킬 하부에 부가물의 부착은 발라스트 중량중심을 낮춤으로서 선체의 복원력을 향상하기에 최적형상을 도출하여야 한다. 이에 본 연구에서는 저항성능 향상을 위한 동일 침수표면적의 핀킬 하부 부가물에 따른 저항특성 비교를 위하여 회류수조를 이용하여 3가지 핀킬 하부 부가물 모형킬을 모형선에 부착하여 형상별 저항특성을 비교 분석하여 저항감소 최적 형상을 도출한 것이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.753-756
• /
• 2013

The demand for sailing yacht is increasing in consonance the improvement of people's live. These yachts can be dually propelled by wind and by diesel engine power. A singing (humming, whistling) phenomenon induced on the propeller was discovered on a 55-foot catamaran sailing yacht. As a result, an increase in the structural vibration of the stern tube room and propulsion system with abnormal noise was detected due to this flow. In this study, the cause of the phenomenon is investigated and its possible countermeasures proposed.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.16-25
• /
• 2014

To develop a sailing yacht successfully, systematic engineering information is required including technologies from various companies and know-how about sailing yacht. The engineering information about sailing yacht has a complex and extensive structure. Therefore, a robust and high-level of management system is needed to manage the information. In this paper, we design and propose Generic-YWBS (Generic-Yacht Work Breakdown Structure), a work breakdown structure for sailing yachts. The Generic-YWBS is aimed at constructing sailing yachts and contains contents about product- and process-oriented information of sailing yachts. In addition, the Generic-YWBS plays an important role in managing the engineering information as a basic schema of database and system architecture. The Generic-YWBS is derived from fundamental WBS design processes and various rules about sailing yachts, for example, ISAF (International Sailing Federation) equipment rule and IRC rating rule, and a generic structure concept is applied for flexibility. The Generic-YWBS is applicable for various purposes. We designed a detailed code system in order to apply the Generic-YWBS to contents management system. The series of activities are realized through a web-based RIA(Rich Internet Application) program. This program manages the YWBS structure in an XML schema, and the Generic-YWBS management application offers a customizing function to be adapted in the field.