• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2351-2353
• /
• 2005

본 논문은 포장도로의 표면 상태를 고성능의 레이저 변위 센서를 사용하여 정밀하게 측정하고, GPS(Global Positioning System)를 사용하여 측정 위치 데이터를 획득하는 도로 표면 측정 장비 개발에 관한 논문이다. 본 연구에서는 전체 시스템을 설계하고, 차량 주행을 모사한 실험 모형을 제작하여 실내 실험을 실시하였으며, GPS 단말기로부터 실시간으로 위치 신호를 수신하여 도로면 데이터와 연동할 수 있도록 하였다. 그리고 평가 차량의 전면에 레일(rail)을 장착하여 레이저 변위 센서가 좌우로 왕복운동이 가능하도록 하였으며, 레일을 작동시킨 상태에서 도로면을 측정해 보았다. 실험 모형의 측정 곁과는 차량이 80km/h로 주행할 때 도로 표지 타이닝(tinning)의 폭 오차 3.24%, 깊이 오차 5%였다. 차량이 정지된 상태에서 레일을 작동시켜 요철을 측정하였을 경우 레일 방향에 대한 폭 오차는 0.07%였다.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.561-566
• /
• 2008

The reciprocating compressor is widely used in the industry field, because it has simple principle and high efficiency. In this work, in order to improve design of discharge passage line in hydrogen compression system Numerical analysis was conducted. General information about an internal gas flow is presented by numerical analysis approach. Relating with hydrogen compressing system, which have an important role in hydrogen energy utilization, this should be a useful tool to observe the flow quickly and clearly. Flow characteristic analysis, including velocity, pressure and turbulence kinetic energy distribution of hydrogen gas going out from the cylinder to discharge-path line are presented in this paper. Discharge-passage model is designed based on real model of hydrogen compressor. Pressure boundary conditions are applied considering the real condition of operating system. The result shows velocity, pressure and turbulent kinetic energy are not distributed uniformly along the passage of the Hydrogen system. Path line or particles tracks help to demonstrate flow characteristics inside the passage. The existence of vortices and flow direction can be precisely predicted. Based on this result, the design improvement might be done.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.39-44
• /
• 2006

An OWC-type Wave Energy Conversion passes through 3 steps energy conversion process. This paper deal with the internal oscillating flow and effect of shape of air chamber and duct at setting place of turbine by numerical analysis using commercial CFD code, FLUENT. Air chamber and duct in OWC-type wave energy conversion are adopting sudden expanded and contracted form for high-efficiency. So, whole oscillating flow from OWC-type chamber to outlet duct through duct was solved by steady and unsteady analysis in order that flow efficiency of air chamber and duct was made better.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.1
• /
• pp.28-36
• /
• 1996

The influence of vertical eddy viscosity to the nonlinear interaction of tidal current and wind-induced current is examined using a point model. A zero-equation turbulence model is derived by simplifying the q$^2$-q$^2$1 turbulence model under the assumption that the generation of turbulence kinetic energy is balanced with its dissipation and is further modified to include the depth of frictional influence properly The zero-equation turbulence model is derived and the possibility of resonance in the presence of Coriolis effect is suggested. The amplitudes of tidal currents remain the same regardless of the applied wind stress, but the over-tide component is generated due to the nonlinear interaction of tidal current and wind-induced current. Significant changes in the vertical profile of wind-induced currents can occur according to tide-induced background turbulence. The turbulence model can give rise to misleading results when applied to the wind-driven circulation in the tide-dominated sea such as Yellow Sea unless the tide-induced background turbulence is adequately included in the parameterization of vertical eddy viscosity.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.118-124
• /
• 1990

The rope winder in addition to the line hauler was used for recoiling of the main line to the rope pond at the stern, however, catching the loops, evenly revoiling and arrangements of the loops were done manually by two men. The automatic loop catcher under the rope winder was consisted with the rotary lever, semicircle guide plates, transfer belt and swing rope receiver for arrangements of the loops and evenly recoiling. The obtained results are as follows: 1. The minor diameter of a loop and the diameter of the coiling pile in a lead core PP rope(ø 10mm) are about 14cm and 60cm while the rope is piled on the bottom. 2. Distribution ratio of the loops within upper or lower 10cm from the transfer belt is 93% with a lead sinker and 98% without sinker using by the smaller loop catcher. 3. The relationship between revolutions of the rotary lever N sub(1) (rpm) and the hauling pulley N sub(p) (rpm) by gear ratio 3:1 in the smaller loop catcher is as follows: N sub(p) =2.86 N sub(1) +23.74 and optimum ratio of horizontal speed of the loops by the rotary lever to hauling speed is about 70%. 4. The rope receiver is swung front and rear for the evenly recoiling and its period can be controlled by gear ratio or hydraulic circuit in accordance with the interval of the loops.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.23-29
• /
• 2020

Since the movements of a machine are driven by a certain principle, there is a fundamental principle that governs the movement of the machine, no matter how complex and diverse it may be. Autonomous movements are a way to avoid repetition, to approach more humane and more natural factors. That's all the more so when it comes to original movements, not cloning. So now, the dynamics of the machine are more multi-sensory by human participation. It is challenging the potential to be expressed and is gradually expanding its sphere of expression in the boundaries of fact and cloning. Theo Jansen's works have changed from period to period to adapt to different circumstances, indicating that his decades-long work has continued to evolve from early to present. The evolution's focus, among other things, can be seen as having the same source of circular motion and horizontal reciprocating motion, which are repeated from the principle of organic coupling between the parts that make up the object.

• 한국체육학회지인문사회과학편
• /
• v.56 no.5
• /
• pp.665-677
• /
• 2017

This study aimed to examine the evolution of exercise performance and medical assessments in U-12 youth football players. Participants were recruited from an youth football players (YFG, n=15; $11.2{\pm}0.9yrs$) and normal youth (CON, n=15; $11.5{\pm}0.6yrs$). Both groups were tested for exercise performance (health related physical fitness, skill related physical fitness, functional movement screen; FMS and Y-balance) and medical assessments (lower extremity alignment, range of motion; ROM and manual muscle test; MMT). YFG showed a positive effects on pacer in health related physical fitness, 50-m run and Single-leg standing with eyes closed in skill related physical fitness, active straight leg raise and rotary stability in FMS, non-dominant composite score in Y-balance, respectively compared to CON. However, YFG showed a negative effects on Q-angle of dominant and non-dominant in lower extremity alignment, dorsiflexion of non-dominant, plantarflexion of dominant and non-dominan in ROM, hip extension and abduction, knee flexion and extension of dominant, knee flexion and extension of non-dominant in MMT, respectively compared to CON. These results indicated that U-12 youth football players have shown excellent exercise performance, but medical assessments has proved negative effects.

• Korean Security Journal
• /
• no.62
• /
• pp.87-111
• /
• 2020

Special security guards working at nuclear power plants, one of the country's major facilities, serve as human protection to safeguard from threats to nuclear facilities and nuclear materials. The purpose of this study was to develop a physical fitness program for fitness management that is essential for the completion of missions of special guards. This program was designed to prepare the physical fitness test proposed by Jeong et al. (2019). Researchers conducted literature analysis, research meetings, expert meetings and pretests, and developed a 90-minute physical fitness program for 6 weeks, 3 times a week. In order to verify the effectiveness of the developed physical fitness program, the experiment was conducted on 29 subjects(control group: 15, exercise group:14). Specifically, a six-week physical fitness program was conducted for exercise groups, and the fitness test for a special security guard was conducted for all subjects before and after the experiment. As a result, it was found that the physical fitness program was effective in improving the performance of 20m shuttle run, leg tuck, 20m sprint & carry, and medicine ball back throw. Until recently, problems of neglecting fitness management of security guards have been pointed out. It is expected that the physical fitness program proposed by this study will be a practical alternative for security guards' fitness management.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.381-391
• /
• 2013

The purpose of this study was try to check the change of a subjective evaluation about the life function fitness and health-related quality of life by executing the home support exercise program three times a week for total 16 weeks with elderly women that are order than 70 years old. The experiment group(total : 17 people, mean age : 79.4) and the control group(total : 17 people, mean age : 80.7) live Yeonje-gu in Busan city, and they don't have any physical injury and any inconvenience to move. and they are all composed of elderly women who agree to participate in this study. We carried out an analysis of covariance with SAS 9.2 statistics package. These are the results from it. First, the experiment group showed statistically significant increase(p<.001) in lifting dumbbells, repeatedly standing up and sitting down, 2.24m shuttle running, walking at the same place for 2 minutes. Second, there was no particular effect with the experiment group in flexibility(catching hands with their backs leaned against each other). This result point out that there is a need of supplementation like adding exercise item which can improve flexibility to home support exercise program. Third, there was no particular difference between the experiment group and the control group in 8 sub-factors with the subjective evaluation about health-related quality of life through SF-36. However, there the bodily pain and vitality sub-factors of experiment group was better than that of the control group with p<.10 level, so we considered this result showed us the positive effect slightly.

• The Journal of the Korean dental association
• /
• v.52 no.12
• /
• pp.734-743
• /
• 2014

Objectives: By introduced reciprocation motion file in dentistry, dentists benefit simple canal shaping procedure and time-saving. But, reciprocation motion generates uncomfortable vibration to doctors and patients. Because there was no study about this consideration, this study compared vibration pattern and power generated from reciprocation motion motor and conventional rotary motor. Materials & Methods: One conventional rotary motor; X-Smart (Dentsply Maillefer, Ballaigues, Switzerland); and two reciprocating motors; WaveOne Motor (Dentsply Maillefer, Ballaigues, Switzerland) and X-SMART PLUS (Dentsply Maillefer, Ballaigues, Switzerland); were used in this study. Triaxial $ICP^{(R)}$ Accelerometer (Model 356A12, PCB piezotronics, New York, USA) was attached on motor's handpiece head, and was measured tri-axial vibratory acceleration with NI Sound and Vibration Assistant 2009 software (National Instruments, Texas, USA). Mean vibratory acceleration and maximum vibratory acceleration was measured on fixed position and handed position. The results of vibratory acceleration were statistically analyzed using ANOVA and multiple comparisons are made using Turkey's test at p<0.05 level. Results: Reciprocating motors showed higher mean vibratory acceleration and maximum vibratory acceleration than conventional rotary motor (p<0.05). Between reciprocating motors, X-SMART PLUS had lower mean vibratory acceleration and maximum vibratory acceleration than WaveOne Motor (p<0.05). Conclusion: Reciprocating motors generate more vibration than conventional rotary motor. Further study about effect of vibration to dentist and patient is needed. And it seems to be necessary to make a standard about vibration level in endodontic motors.