• Korean journal of applied entomology
• /
• v.57 no.1
• /
• pp.51-52
• /
• 2018

Out of 60 quarantine insect pests in Korea, 42 species are classified into tephritid fruit flies. Most of these fruit flies are attracted to two natural products, methyl eugenol (ME) or raspberry ketone. Paraffin wax has been devised to formulate these lures. The formulated lures were applied to field test in Taiwan to attract quarantine fruit flies. Wax-ME formulation was installed in Delta trap and could attract 60-80 males of B. dorsalis per day during late August, while a wax formulation of Cue-lure (a methylated compound of raspberry ketone) attracted both B. cucurbitae and B. tau. These wax formulations can be applied to monitor these three quarantine species in Korea.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.376-381
• /
• 2013

High molecular weight paraffinic waxes dissolved in oil phases can be precipitated when the surrounding temperature becomes lower than the wax appearance temperature (WAT). While the various methods of WAT determination have been developed, the determination of precipitated wax amount has not been comparably popular at temperatures below the WAT. It is important to predict how much solid wax content precipitates in temperature variance. The study develops the previous method which uses integrated areas determined at a wavenumber range of 735~715 $cm^{-1}$. This method uses two different wavenumber ranges, 735~715 $cm^{-1}$ and 1,402~1,324 $cm^{-1}$. The study shows how the method provides reliable data in the variety of applications regardless of FTIR spectral instability often occurred, such as volume reduction during cooling procedure and existence of emulsified water in oil phase.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.237-242
• /
• 2019

This study examined the effect of paraffin wax mask pack on skin improvement. The subjects were 13 males and females in 20s. Subjects applied the paraffin wax mask pack eight times for four weeks. To determine the effects of paraffin wax mask pack on the skin, we measured oil, moisture, skin surface temperature, softness of skin and satisfaction in subjective skin condition. After using the paraffin wax mask pack, the moisture, oil content of the facial skin, skin surface temperature and softness of skin increased. In addition, the subjects were highly satisfied with the improvement in subjective skin conditons such as dryness, oil and skin tone. Therefore, these results suggest that paraffin wax mask pack has beneficial effects on skin improvement and it will have high utility and value as development of skin care devices for skin care.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.151-160
• /
• 2018

Waxes currently used as a coating material to preserve surfaces of outdoor iron sculptures tend to face lower coating strength and efflorescence due to the aging from air pollution and acid rains. Consequently, they are subjected to repeated corrosions shortly after the treatment. And the sculptures face the problem losing their original nature because of the changes of colors and lusters, so this convergence study aims at developing wax with better performance than the existing materials. For this reason, the study identified the effects of physical property using the environmental experiments such as the tests of salt spray and gas corrosion as well as the analysis of luster level and thermo-gravimetry. As this study result, the developed ISC wax showed the excellent blocking effect from salt water and coating durability more than five times compared with the existing waxes, better acid resistance by two-four times, sun block effect by 2-10 times, improved luster variance by 3-16 times, improved thermo-stability and durability by 0.5-5 times, and therefore demonstrating far better coating effect than the existing waxes. In the light of these findings, this study contributes for this new development which can replace the existing waxes used so far in order to preserve the outdoor iron sculptures.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.63-67
• /
• 2014

Fischer-Tropsch synthesis mainly produces a wax which is a viscous liquid for long carbon chain. When a catalytic fixed-bed reactor is used for Fischer-Tropsch synthesis, the wax generated on a catalyst surface can keep adsorbing on the catalyst surface. This liquid hold-up causes significant pressure drop and clogging problems through the reactor. Thus, the model for liquid hold-up is required to design the size of reactor and catalyst particles. In this study, the liquid hold-up model considering structural and operational conditions was proposed based on empirical equations for convective mass transfer between the syngas flow and the wax-adsorbed catalyst. The developed model was validated by comparing with the experimental data from Knochen's work (2010). The influence of reactor length and coross section on the wax hold-up in reactor were analyzed and the optimal reactor size were proposed.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.698-705
• /
• 2016

In this study, we have studied the polymerization of polyethylene wax using metallocene catalysts and its physical properties. Various polymerization conditions were tried for polymerization of polyethylene wax. We have evaluated hydrogen reactivity and studied on characteristics of polymerization effected by ligand structure of metallocene catalysts against Ziegler-Natta catalysts which are widely used for polymerization of polyethylene. We have also checked hydrogen used for chain transfer agent, molecular weight change and distribution by different ratios of ethylene gas. Finally, we suggest proper structure of metallocene catalysts for polymerization of polyethylene wax.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.844-852
• /
• 1997

In the polymerization of ethylene to produce crystalline polyethylene wax using the homogeneous titanium-based catalyst, the effects of various parameters such as catalyst, temperature, pressure, comonomer and time on the performance of catalyst and the properties of polyethylene wax were investigated. The properties of polyethylene wax obtained were characterized in terms of molecular weight, molecular weight distribution, crystallinity, density and morphology. Among the polymerization features with a series of mixed cocatalyst systems of $(C_2H_5)_3Al$, $(i-C_4H_9)_3Al$, $(C_2H_5)_2AlCl$ and $(C_2H_5)_3Al_2Cl_3$, it turned out that the combination of $(C_2H_5)_3Al$ and $(C_2H_5)_3Al_2Cl_3$ was more effective than any other combination. It was noted that the activity of catalyst and the properties of polyethylene wax were affected by the polymerization parameters, i.e. time, temperature and hydrogen partial pressure. The various kinds of crystalline polyethylene wax could be obtained by careful control of these parameters. Also we could obtain low density polyethylene wax which has density down to 0.91 g/cc by use of 1-butene as a comonomer.

• Solar Energy
• /
• v.12 no.3
• /
• pp.28-36
• /
• 1992

The performance of a latent heat storage system using a thermosyphon as the heat transfer device between the heat source and the phase change material was investigated experimentally. In order to increase the effective conductivity of the phase change material, layers of copper wire mesh were immersed in the paraffin wax(Sunoco P-116) in such a way that they also may be considered as fins of the thermosyphon. The important results are as follows : (1) The void space of the wire mesh allowed the convection to occur, thus enhanced the performance of the system : (2) The increase of the number of layer of wire mesh increased the conduction heat transfer. However, it also had adverse effect of subduing convective motion of liquid wax : and (3) Overall heat transfer coefficient and thermosyphon conductance increased with the increase of the number of layer of wire mesh, whereas the heat transfer coefficient between the thermosyphon and the wax decreased.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.437-443
• /
• 2010

The influence of noxious corrosive gas, which is the product of fossil fuel, and the acidic descent material, which becomes the reason for such reaction, on wax which protects the cultural assets, and the habitat factor were researched. It could be viewed that corrosion occurred rapidly due to the acidic descent material, which have the long staying on the material, rather than harmful corrosive gas. Also, it could be figured out that such corrosion began from whitening phenomenon of coated wax. As the acidity increased, more whitening phenomenon occurred, and eventually, it could be found out that whitening effect began due to the acidic descent material, corrosive gas and various 0.1 M acid solution, which lead to the exposure of internal metal, and corrosion occurred. The wax with the greatest resistance to the acidity due to its least changing aspect seemed to be Renaissance wax, except sulfuric acid.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.566-572
• /
• 2008

Polyethylene has been prepared via metallocene catalysts [(TMDS)$Cp_2$]$ZrCl_2$, 1, and [$(n-Bu)_2Cp_2$]$ZrCl_2$, 2, in the presence of hydrogen as a chain transfer reagent. Increase of hydrogen flow to the polymerization reactor resulted in the drop of catalytic activity, reduction of molecular weight of polyethylene, getting narrow of molecular weight distribution of polyethylene, and melting point of the polyethylene wax. It should be noticed that it was possible to control molecular weight down to 1500 and melting temperature to 60 $^\circ$C of polyethylene wax using the catalyst 1 that has been developed by authors as well as the catalyst 2 from Exxon.