• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.738-742
• /
• 2006

In this study we developed the electrical heating mold core by applying three different heating methods. In order to find out the optimal heating method, we observed the temperature profiles with time. We also injection-molded the parts by the heating methods and investigated the shrinkage ratio, density, surface roughness and weld-lines. The temperature rise time and cycle time showed the promising results for commercial applications(the rise time is $130^{\circ}C$/14sec, the cycle time is 55sec). By comparing with the conventional and gas flame heating method, the parts by this method were proven to have good qualities. The shrinkage ratio reduced by 5.1%, the density increase by 2.66%, the smoothness increased about 3 times, and the weld-line did not observed by naked eyes.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.583-587
• /
• 2015

This Purpose of this study is to develop a system for stable production without troubling side effects, scalp and skin, and sensitivity to temperature and humidity, but the ozone-cream at a constant effective value and the durability of peroxide safe discharge tube. Furthermore, olive oil and ozone is reacted with the wish to apply to the manufacturing technology. If peroxide value of ozonized olive oil exceeded 1200 meg/kg, there may be microbial disinfection. However, to be produced with a minimum of risk because they look to the scalp and skin sensitization is the purpose of the present study. And also the durability of the discharge tube was tested during the production unit for stable production. And the experimental results, Peroxide value of the ozonized olive oil was measured to less than 1300 meg/kg, also it showed a stable result of the discharge tube.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.152-158
• /
• 2014

It is very important to supply the diesel fuel from fuel tank to combustion chamber in case of cold start procedure. the paraffin hydrocarbons are easily solidified at low fuel temperature and it can be blocking the fuel supply to the high pressure fuel pump. In order to reduce the fuel crystallization (Waxing), it have been used to develop not only cold flow additives but also the proper mounting design of fuel filter. Block heater in the fuel filter assembly have been also contained to improve the cold start and prevent blocking the fuel supply in Common Rail Direct Injection System. we can obtain the fuel pressure drop and fuel flow rate, power consumption of fuel heater to have the cold flow evaluation test with the saperated and composited fuel heater at the low ambient temperature, Due to evaluating cold flow performance of two block heater, we knew that composited package fuel heater was the excellent cold flow performance compared to separated type and obtained the parameters of cold flow.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.671-677
• /
• 2012

A black-box program was implemented in order to monitor abnormal symptoms of human body irregularly occurring during sleep. The system consists of sensor probing body signals, auxiliary devices such as the alarm, lamp, network camera, and signal monitoring computer. Various types of sensors, PPG, ECG, EEG, temperature, respiration sensor, G-sensor, and microphone were used to more exactly identify the causes of abnormal symptoms. If a symptom occurs, the system records the patient's condition to provide information being utilized in the treatment. The sensors are attached on some locations of body being proper to check a specific type of abnormal reaction. Based on the normal range and type of measurement data, criteria of signal levels were set to distinguish abnormal reaction. An abnormal signal being probed, the program starts to operate the lamp, alarm, and network camera at the same time and stores the signal and video data.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.492-497
• /
• 2008

The solubility of carbon dioxide in ionic liquids and amine solvents has been investigated in gas-liquid absorption equilibrium reactor. Absorption capacity and kinetics of $CO_2$ with $CO_2$ pressure and absorption time in 9 different ionic liquids and 2 kinds of amine solvents were evaluated. In order to understand the effect of ionic type, we changed the cation or anion of ionic liquids. $CO_2$ absorption capacity and absorption rate of amine solvents were higher than those of ionic liquids. $CO_2$ absorption capacity of [emim][$Tf_2N$], $0.14molCO_2/mol\;IL$ at 1 bar, was the highest among the ionic liquids. $CO_2$ absorption capacity of ionic liquid steeply decreased with increasing temperature. Anion of ionic liquid dominates interaction with $CO_2$ and cation plays secondary role.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.827-830
• /
• 2011

In this paper, a wind speed & direction module and the DSP(Digital Signal Processor) sensor interface circuit board are proposed. This DSP system accepts and process the informations from a wind speed & direction module, the atmospheric pressure sensor, the ambient air temperature sensor and transfers it to the PC monitering system. Especially, a wind speed & direction module and a DSP hardware are directly designed and applied. A wind speed & direction module have a construction that it have four film type RTD(Resistive Temperature Detectors) or film type Piezo sensors adhered around the circular metal body for obtaining vector informations about wind. By this structure, the module is enabled precise measurement having a robustness about vibration, humidity, corrosion. A sensor signal processing circuit is using TMS320F2812 TI(Texas Instrument) Corporation high speed DSP.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.31-36
• /
• 2017

In this paper, designed infrared (IR) emitter device for infrared scene projector (IRSP) which is used for evaluating the performance of IR sensor systems was simulated by using finite element analysis (FEA) tool and fabricated by using MEMS (Micro Electro-Mechanical System) technology. The performance of the fabricated IR emitter unit device was characterized in the vacuum chamber by using IR image microscope for MWIR($3{\sim}5{\mu}m$), which showed 423K apparent temperature (Tapp) and 22msec time constant (${\tau}$).

• Fire Science and Engineering
• /
• v.26 no.2
• /
• pp.53-58
• /
• 2012

In this study fire control characteristics for inflammable materials of water curtain system are experimentally analyzed. Heat release rate for pinewood and gasoline was calculated using Room Corner Tester (RCT) and fire test apparatus for water curtain system is manufactured. Nozzles (180 degree of injection angle, 8.2 mm of orifice diameter) are installed at the nearby ceiling of place at 5 m distance from fire originate and temperature profile as well as transmission are obtained from the fire experiment of pinewood and gasoline in the water curtain system. Based on the results, parameters of engineering importance for fire control characteristics of water curtain system such as generation of high temperature smoke and thermal phenomena of fluid flow by injection nozzle are identified.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.51-56
• /
• 2011

The full-scale experiments are carried out to investigate the fire suppression characteristics of water-based fire fighting systems in a road tunnel. Applied systems are the low-pressure water spray system at 3.5 bar and the high-pressure water mist system at 60 bar. The water flow rate of the high-pressure system is one sixth only of the water spray system. A passenger car and a heptane fuel pan with area of $1.4m^2$ are used as fire sources. A blower system is installed at the tunnel exit to realize the longitudinal ventilation conditions (0.9~3.8 m/s) in the tunnel. Temperatures from the fire source to the down-stream direction are measured by K-type thermocouple trees. The experimental results show that the cooling effect of the high pressure water mist system in the test conditions were equivalent to that of the low pressure water spray system for B-class fire.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.323-323
• /
• 2014

기존의 태양전지 기술은 기술 장벽이 매우 낮고 대량 생산을 통한 단가 절감하는 구조를 가지고 있어 대규모 자본을 가진 후발 기업에게 잠식되기 쉽다. 그러나, III-V족 화합물 반도체를 이용한 집광형 고효율 태양전지는 기술 장벽이 매우 높은 기술 집약 산업이므로 독자적인 기술을 확보하게 되면 독점적인 시장을 확보 할 수 있어 미래 고부가 가치 산업으로 적합하다. 특히 III-V족 화합물 반도체 태양전지는 III족 원소(In, Ga, Al)와 V족 원소(As, P)의 조합으로 0.3 eV~2.5 eV까지 밴드갭을 가지는 다양한 박막 제조가 가능하여 다양한 흡수 대역을 가지는 태양전지 제조가 가능하기 때문에 다중 접합 태양전지 제작이 가능하다. 또한 III-V 화합물 반도체는 고온 특성이 우수하여 온도 안정성 및 신뢰성이 우수하고, 또한 집광 시 효율이 상승하는 특성이 있어 고배율 집광형 태양광 발전 시스템에 가장 적합하다. Si 태양전지의 경우 100배 이하의 집광에서 사용하나, III-V 화합물 반도체 태양전지의 경우 500~1000배 정도의 고집광이 가능하다. 이러한 특성으로 III-V 화합물 반도체 태양전지 모듈 가격을 낮출 수 있고, 따라서 Si 태양전지 시스템과 비교하여 발전 단가 면에서 경쟁력을 확보할 수 있다. III-V 화합물 반도체는 다양한 밴드갭 에너지를 가지는 박막 제조가 용이하고, 직접천이(direct bandgap) 구조를 가지고 있어 실리콘에 비해 광 흡수율이 높다. 또한 터널정션(tunnel junction)을 이용하면 광학적 손실과 전기적 소실을 최소화 하면서 다양한 밴드갭을 가지는 태양전지를 직렬 연결이 가능하여 한 번의 박막 증착 공정으로 넓은 흡수대역을 가지며 효율이 높은 다중접합 태양전지 제작이 가능하다. 이에 걸맞게 본연구에서는 화학기상증착장치(MOCVD)를 이용하여 InAsP 나노선을 코어 쉘 구조로 성장하여 태양전지를 제작하였다. P-type Dopant로는 Disilane (Si2H6)을 전구체로 사용하였다. 또한 Benzocyclobutene (BCB) 폴리머를 이용하여 Dielectric을 형성하였고 Sputtering 방법으로 증착한 ZnO을 투명 전극으로 사용하여 나노선 끝부분과 실리콘 기판에 메탈 전극을 형성하였다. 이를 통해 제작한 태양전지는 솔라시뮬레이터로 측정했을때 최고 7%에 달하는 변환효율을 나타내었다.