• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.31-36
• /
• 2014

In this paper, we developed an intergrated piezoresistive temperature and humidity sensor using nano-technology, and evaluated the properties. In the measuring range from $20^{\circ}C$ to $80^{\circ}C$, output sensitivity of temperature was about 0.75mV/$1^{\circ}C$. Output sensitivity of humidity was about 1.35mV/10%(RH). Therefore, developed sensor suggests that it is possible applicable to the general residential environment.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.96-105
• /
• 2011

Ubiquitos sensor network(USN) is a technology which is widely used in our life. This paper introduces an example of design and implementation for a system which is based on the USN technology and can provide an efficient management tool for a space that should be precisely controlled for a certain range of uniformity in temperature and humidity. This introduced system builds a wireless sensor network using a number of sensor modules that are equipped with temperature and humidity sensors, and collects temperature and humidity information in real-time while simultaneously providing a method for monitoring the status of temperature and humidity by the graphical user interface. Also, the system will give a warning signal if the monitored values are differ from the pre-specified values of temperature and humidity for each sensor module more than a certain amount of tolerance. This temperature and humidity logging and monitoring system can perform better management for the space easily and efficiently by automating the existing manual method for data collection and management. Furthermore, using the stored data, it can make possible to perform post-analysis on the problems caused by temperature and humidity and to obtain information for environmental enhancement for the space.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.27-32
• /
• 2006

A temperature-compensated hygrometer has been developed using resistive humidity sensors. It consist of a sine wave generator, logarithm converters, rectifiers, and amplifiers. The hygrometer accomplishes the linearization and temperature compensation of sensor characteristics. The theory of operation is presented and experimental results are used to verify theoretical predictions. The experimental results show that the conversion sensitivity of the hygrometer is about 24.8 mV/%RH and the linearity error of the conversion characteristic is less than 17.2 % over a relative humidity range from 30 to 80 %RH. The results also show that the temperature coefficient of the output voltage is less than $10149ppm/^{\circ}C$ over a temperature range from 22 to $40^{\circ}C$.

• 전기의세계
• /
• v.35 no.1
• /
• pp.11-19
• /
• 1986

본고의 내용은 다음과 같다. 1. 센서의 정의 2. 광(시각)센서 3. 온도(촉각)센서 4. 자기(촉각)센서 5. 가스.습도(후각)센서 6. 압력(촉각, 청각)센서

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.1-8
• /
• 2005

In this paper, we present design and prototyping of a low-cost, integrated multi-functional micro health sensor chip that can be used or embedded in widely consumer devices, such as cell phone and PDA, for monitoring environmental condition including air pressure, temperature and humidity. This research's scope includes basic individual sensor study, architecture for integrating sensors on a chip, fabrication process compatibility and test/evaluation of prototype sensors. The results show that the integrated TPH sensor has good characteristics of ${\pm}\;1\%FS$ of linearity and hysteresis for pressure sensor and temperature sensor and of ${\pm}\;5\%FS$ of linearity and hysteresis But if we use 3rd order approximation for humidity sensor, full scale error becomes much smaller and this will be one of our future study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.217-221
• /
• 2012

As a part of basic research to improve screen quality, which deteriorates when strain occurs within optical sheets in LCD modules for laptop computers, a measurement system is needed to analyze the influence of heat and moisture, which are the main factors causing the strain. It is assumed that the existence of an air gap less of than 0.5 mm inside the LCD module causes humid air from outside to permeate through the module. To investigate this phenomenon, in this study a thin printed circuit board (PCB) of compact sensors that measure temperature and humidity is inserted into LCD modules, and thus, the changes in temperature and humidity can be analyzed in real time. The results can be used as basic data for simulation of the deformation behavior and structural design of LCD modules in the future.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.42-48
• /
• 2011

This paper presents a bridge road surface frost prediction and monitoring system. The node sensing hardware comprises microprocessor, temperature sensors, humidity sensors and Zigbee wireless communication. A software interface is implemented the control center to monitor and acquire the temperature and humidity data of bridge road surface. A bridge road surface frost occurs when the bridge deck temperature drops below the dew point and the freezing point. Measurement data was used for prediction of road surface frost occurrences. The actual alert is performed at least 30 minutes in advance the road surface frost. The road surface frost occurrences data are sent to nearby drivers for traffic accidents prevention purposes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.543-544
• /
• 2014

In this paper, we present the design of a compound sensing platform to share environment information with other smart devices such as a gateway, a phone, a pad, etc. The proposed compound sensing platform is designed as a single-board hardware to support air temperature and humidity, soil temperature and humidity, solar visible radiation, etc. It sends the measured information to a smart gateway which shares the information with smart phones and pads by Twitter.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2020

PET(Positron Emission Tomography) devices are used as PET/CT or PET/MRI devices fused with the devices of CT or MRI for obtaining anatomical information. Therefore, the devices are constructed in circular ring-type structure whose length of gantry(the main part of filming) becomes wider and the interior depth becomes longer in comparison to other common medical equipments. scintillator, one of the components in PET devices, is inside the gantry, and as it is consisted of crystal which is sensitive to the change of temperature and humidity, large temperature change can cause the scintillator to be damaged. Though scintillator located inside the gantry maintains temperature and humidity with a thermo-hygrostat, changes in temperature and humidity are expected due to structural reasons. The output value was measured by dividing the inside of the gantry of the PET/CT device into six zones, each of which an Adafruit BME 280 temperature and humidity sensor was placed at. A thermo-hygrostat keeps the temperature and humidity constant in the PET/CT room. As the measured value of temperature and humidity of the sensor was obtained, the measured value of temperature and humidity appeared in the thermohygrostat was taken at the same time. Comparing the average measured values of temperature and humidity measured at each six zones with the average values of the thermo-hygrostat results in a difference of 2.71℃ in temperature and 21.5% in humidity. The measured temperature and humidity of PET Gantry is out of domestic quality control range. According to the results of the study, if there is continuous change in temperature and humidity in the future, the aging of the scintillator mounted in the PET Gantry is expected to be aging, so it is necessary to find a way to properly maintain the temperature and humidity inside the Gantry structure.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1805-1806
• /
• 2006

ET(Environment Technology) 분야 중 식물의 종자 배양에 관한 연구는 환경 변화에 강하고 생산성을 향상시켜 농가 소득 증대에 중요한 역할을 하는 분야이다. 주로, 온실 또는 청정실에서 연구를 진행하여 민감한 외부환경 변화를 차단하고 정확한 데이터를 산출해야 하는 정밀성이 요구된다. 특히, 온/습도의 변화는 종자의 생장에 지대한 영향을 끼치는 중요한 요소이다. 기존의 연구환경에서는 디지털 온도계 또는 수은 온도계에 의지하는 경우가 대부분이었다. 최근에는 온/습도를 통합 제어하여 일정하게 유지하는 공조시스템을 사용하고 있지만 저렴한 시스템 보급에는 맞지 않다. 본 논문에서는 우선적으로 LabVIEW를 이용하여 온/습도 모니터링 시스템을 설계하고 온/습도 센서를 이용하여 실시간 원격으로 모니터링 할 수 있는 시스템을 개발하고자 하였다.