• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.514-520
• /
• 2018

Presence service provides various information about users such as locations, status of on/offline and network access methods, and number of presence resources required by each users increases largely in mobile environment. Therefore an effective method which can reduce load of presence servers is needed. In this paper, a large scale distributed presence service system which can distribute effectively total presence system load of presence servers using message control session has been presented. This large scale distributed presence service system provides various presence information for massive volumes of users. In this study, a new message control session architecture which can dynamically distribute loads of the presence servers to multiple servers has been presented, and a new presence information data architecture for controlling load of the presence servers has been designed. In this architecture, each presence server can exchange current load level in real time to get variance of the total system load change according to user numbers, and can distribute system load to maintain load level of each server evenly. The performance of the proposed large scale distributed presence service system has been analysed by experiments. The results has been showed that average presence resource subscription processing time reduced from 42.6% to 73.6%, and average presence notification processing time reduced from 37.6% to 64.8%.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2022

Learning C programming language in electronics education is an important basic education course for understanding computer programming and acquiring the ability to use microprocessors in embedded systems. In order to focus on understanding basic grammar and algorithms, it is a common teaching method to write programs based on C standard library functions in the console window and learn theory and practice in parallel. However, if a student wants to start a project activity or go to a deeper stage after acquiring some basic knowledge of the C language, using only the C standard library function in the console window limits what a student can express or control with the C program. For the purpose of making it easier for a student to use graphics or multimedia resources and increase educational value, this paper studies a case of applying Simple DirectMedia Layer (SDL), an open source software, into the C programming language learning process. The SDL-based programming course applied after completing the basic programming curriculum performed in the console window is introduced, and the educational value is evaluated through a survey. As a result, more than 56% of the respondents expressed positive opinions in terms of improved application ability, stimulating interest, and overall usefulness, and less than 4% of them had negative opinions.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.648-653
• /
• 2008

With development of mobile communications terminal and expansion of mobile Internet, a large number of users can use mobile web contents at anytime and anywhere and will demand service of greater contents. Due to such demand, many studies are being carried out on transcoding contents so that wired web contents can be used in mobile web. However, transcoding and creation of mobile web contents involve difficulties because specifications available from telecommunications companies and mobile terminals have not been standardized. Especially, in order for serving dynamic object of wired web page contents to dynamically change according to time or user, it is required not only to program scripts to suit each terminal, but also to transcode the resources used in advance. For solution to this problem, this study uses the hierarchy structure of DOM (document object model) to display structural characteristics of wired web page. In other words, this study proposes the following technique Wired web pages are analyzed and the results are established as data structure. Then, dynamic object is extracted and the domain is indexed so that, when serving mobile web page, information can be extracted at the indexed position to create mobile web contents for service on real-time basis.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.118-128
• /
• 2015

Recently BIM technology has been expanded for using in construction project. Due to the high-cost of BIM infrastructure development, lack of regulations, lack of process and so forth, usage of BIM has been delayed than initial expectations. In design phase, especially, collaboration based on BIM system has been a key factor for successful next generation building project. Through the analysis of current research trends about IT technologies, virtualization and BIM service, data exchange such as drawings, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. The purpose of this study is to enable the cloud computing BIM server to provide several main functions such as editing models, 3D model viewing and checking, mark-up and snapshot in high-performance quality by proper design of VDI system. Concurrent client connection performance is a main technical index of VDI. Through testing of test-bed server client, developed VDI system's multi-connect control is evaluated. Performance-test result of BIM server VDI effect to development direction of cloud computing BIM service for commercialization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.1-7
• /
• 2018

The IoT environment provides an infinite variety of services using many different devices and networks. The development of the IoT environment is directly proportional to the level of security that can be provided. In some ways, lightweight cryptography is suitable for IoT environments, because it provides security, higher throughput, low power consumption and compactness. However, it has the limitation that it must form a new cryptosystem and be used within a limited resource range. Therefore, it is not the best solution for the IoT environment that requires diversification. Therefore, in order to overcome these disadvantages, this paper proposes a method suitable for the IoT environment, while using the existing block cipher algorithm, viz. the lightweight cipher algorithm, and keeping the existing system (viz. the sensing part and the server) almost unchanged. The proposed BCL architecture can perform encryption for various sensor devices in existing wire/wireless USNs (using) lightweight encryption. The proposed BCL architecture includes a pre/post-processing part in the existing block cipher algorithm, which allows various scattered devices to operate in a daisy chain network environment. This characteristic is optimal for the information security of distributed sensor systems and does not affect the neighboring network environment, even if hacking and cracking occur. Therefore, the BCL architecture proposed in the IoT environment can provide an optimal solution for the diversified IoT environment, because the existing block cryptographic algorithm, viz. the lightweight cryptographic algorithm, can be used.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.3
• /
• pp.99-106
• /
• 2018

In the process of acquiring information through the cyber ISR (Intelligence Surveillance Reconnaissance) and research into the agent to help decision-making, periodic communication between the C&C (Command and Control) server and the agent may not be possible. In this case, we have studied how to effectively surveillance and reconnaissance. Due to the network configuration, agents planted on infiltrated computers can not communicate seamlessly with C&C servers. In this case, the agent continues to collect data continuously, and in order to analyze the collected data within a short time in When communication is possible with the C&C server, it can utilize limited resources and time to continue its mission without being discovered. This research shows the superiority of incremental learning method over batch method through experiments. At an experiment with the restricted memory of 500 mega bytes, incremental learning method shows 10 times decrease in learning time. But at an experiment with the reuse of incorrectly classified data, the required time for relearn takes twice more.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.29-42
• /
• 2018

As information technology is more actively incorporated into automobiles, the role of IVIS (In-Vehicle Infotainment System) is becoming increasingly important for providing convenience and entertainment for drivers. However, using the infotainment systems while driving requires task switching and attending to two visual resources simultaneously. We simulated a setting where participants have to drive while interacting with the infotainment system and examined how task difficulty and motor cues impact driver task-switching and driving performance, specifically whether the effects of motor cues differ depending on task difficulty. For the infotainment display, we used two types of number array depending on the congruency between the digit repetition and the chunking unit, while task difficulty was manipulated by the size of the touch-keys. Participants were instructed to dial two numbers on the screen while we recorded the dialing time, lateral position, inter-key press intervals, and steering wheel control. We found that dialing time and lateral position were affected by task difficulty, while the type of number array had no effect. However, the inter-key press intervals between chunked numbers and steering wheel movement both increased when participants had to use an incongruent number array, which indicates that, if number digits are repeated, chunking is ignored by the drivers. Our findings indicate that, in a dual-task condition, motor cues offset the effect of chunking and can effectively signal the timing for task switching.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.75-84
• /
• 2018

Increasing the operation rate of components and stabilizing the operation through timely management of the core parts are crucial for improving the efficiency of the railroad maintenance industry. The demand for diagnosis technology to assess the condition of rolling stock components, which employs history management and automated big data analysis, has increased to satisfy both aspects of increasing reliability and reducing the maintenance cost of the core components to cope with the trend of rapid maintenance. This study developed a big data platform-based system to manage the rolling stock component condition to acquire, process, and analyze the big data generated at onboard and wayside devices of railroad cars in real time. The system can monitor the conditions of the railroad car component and system resources in real time. The study also proposed a machine learning technique that enabled the distributed and parallel processing of the acquired big data and automatic component fault diagnosis. The test, which used the virtual instance generation system of the Amazon Web Service, proved that the algorithm applying the distributed and parallel technology decreased the runtime and confirmed the fault diagnosis model utilizing the random forest machine learning for predicting the condition of the bearing and wheel parts with 83% accuracy.

• The KIPS Transactions:PartD
• /
• v.14D no.3 s.113
• /
• pp.355-362
• /
• 2007

With development of mobile communications terminal and expansion of mobile Internet, a large number of users can use mobile web contents at anytime and anywhere and will demand service of greater contents. Due to such demand, many studies are being carried out on transcoding contents so that wired web contents can be used in mobile web. However, transcoding and creation of mobile web contents involve difficulties because specifications available from telecommunications companies and mobile terminals have not been standardized. Especially, in order for serving dynamic object of wired web page contents to dynamically change according to time or user, it is required not only to program scripts to suit each terminal, but also to transcode the resources used in advance. for solution to this problem, this study uses the hierarchy structure of DOM (document object model) to display structural characteristics of wired web page. In other words, this study proposes the following technique. Wired web pages are analyzed and the results are established as data structure. Then, dynamic object is extracted and the domain is indexed so that, when serving mobile web page, information can be extracted at the indexed position to create mobile web contents for service on real-time basis. Also, this study aims at developing an editing device to edit mobile web contents and mobile web service server to service the edited contents by applying the above technique.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.182-189
• /
• 2014

A tapped delay line time-to-digital converter (TDC) can be easily implemented using internal carry chains in a field-programmable gate array, and hence, its use is widespread. However, the tapped delay line TDC suffers from performance degradation because of differences in the delay times of dedicated carry chains. In this paper, a dual edge measurement method is proposed instead of a typical step signal to the delay cell to compensate for the performance degradation caused by wide-delay cells in carry chains. By applying a pulse of a fixed width as an input to the carry chains and using the time information between the up and down edges of the signal pulse, the timing accuracy can be increased. Two dedicated carry chain sites are required for the dual edge measurements. By adopting the proposed dual edge measurement method, the average delay widths of the two carry chains were improved by more than 35%, from 17.3 ps and 16.7 ps to 11.2 ps and 10.1 ps, respectively. In addition, the maximum delay times were improved from 41.4 ps and 42.1 ps to 20.1 ps and 20.8 ps, respectively.