• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.95-99
• /
• 2006

In this paper, we proposed the new wavelength tunable filter for wide tunability of fiber ring laser. The proposed filter consists of the cascaded connection of Fiber Reflection Mach-Zehnder Interferometer and Sagnac filter or of hybrid filter and Fiber Reflection Mach-Zehnder Interferometer. The simulation shows that the continuous tunable range of 50nm can be obtained and that more stable single mode operation of ring laser can be expected due to narrow FWHM. of filter spectrum.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

In this paper, have necessity of PACS (Picture Archiving and Communication System) at hospital but hereafter by economical problem PACS apply this to medical treatment image enhancing image quality applying histogram equalization for improvement of light and darkness after reconstruct because make image that pretreatment filtering has wild picture and is processed in wave lets dissolution and wave lets area using weight median filter because could not buy expensive equipment at hospital which introduction is difficulty do inversion and extracted characteristic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.1044-1049
• /
• 1993

In this paper, it is shown that B-CDMA systems inherently reduce the effects of Multi Path fading phenomena which causes to degrade the performance of mobile communication systems. B-COMA systems use PN codes of high chip rates ( > 10 Mbps) and evaluate autocorrelation with the same code in the receiver. Therefore, it is possible that multipath signals, whose delay time is longer than one chip duration compared to the first signal, are removed. We model the wideband fading channel as a suitable linear filter, and perform computer simulation of signal transmission and reception. Graphic comparison of eye diagrams between the narrowband and wideband systems is shown.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.52-57
• /
• 2000

In this paper, we designed the 16 Kbps speech coder that has compatibility with CS-ACELP algorithm(G.729). The speech signal is sampled at rate of 16 KHz, divided into two narrowband signal by QMF filterbank, and decimated to rate of 8 KHz. The lower-band signal is encoded by CS-ACELP and the upper-band signal is encoded by Adaptive Transform Coding(ATC) algorithm. At the receiver, two band signals are synthesized by decoder of CS-ACELP and ATC, respectively. The reconstructed output is obtained by passing the QMF synthesis bank. The proposed wideband coder is evaluated with ITU-T G.722 coder through the Mean Opinion Score(MOS) test.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.217-222
• /
• 2016

This study investigates the design, analysis, and implementation of the square-root extended Kalman filter by using an algorithm derived by combining the Potter or Carlson algorithm with the modified Gram-Schmidt algorithm, for sensorless speed control of a permanent-magnet synchronous motor. The sensitivity of the Kalman filter to round-off errors is a well-known problem. A possible way to address this limitation is by combining the square-root concept and Kalman filter that can improve the numerical performance and solve instability-related problems such as divergence. This paper presents the design and analysis of the implementation of such a square-root extended Kalman filter. To demonstrate the performance of the proposed filter, experimental results under several operating conditions, such as high and low speeds, reversal rotation, detuned parameters and load test, have been analyzed. Further, code sizes and operation times have been compared. Experimental results establish the performance of the proposed square-root extended Kalman filter-based estimation technique for sensorless speed control of a permanent-magnet synchronous motor.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.261-272
• /
• 2005

3D models in urban areas are essential for a variety of applications, such as virtual visualization, GIS, and mobile communications. LIDAR (Light Detection and Ranging) is a relatively new technology for obtaining Digital Terrain Models (DTM) of the earth's surface since manual 3D data reconstruction is very costly and time consuming. In this paper an approach to extract ground and non-ground points data from LIDAR data by using filtering is presented and the accuracy for generating DTM from ground points data is evaluated. Numerous filter algorithms have been developed to date. To determine the performance of filtering, we selected three filters which are based on the concepts for height difference, slope, and morphology, and also were applied two different data acquired from high raised apartments areas and low house areas. From the results it has been found that the accuracy for generating DTM from LIDAR data are 0.16 m and 0.59 m in high raised apartments areas and low house areas respectively. We expect that LIDAR data is used to generate the accurate DTM in urban areas.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.5
• /
• pp.171-180
• /
• 2003

CDMA(Code Division Multiple Access) mobile communication systems require accurate channel estimation in the receiver to compensate the fading distortions. Instantaneous channel estimates are obtained by dividing the received symbol by the transmitted symbol and then refined by filtering to reduce the estimation variance. In the channel estimation filter, the determination of the filter size is a very important task which greatly affects the estimation quality. While conventional methods usually use only velocity estimators to determine the channel estimation filter size, this paper proposes a filter size determination method for decision-directed channel estimators considering the symbol error rate and the signal-to-noise ratio in addition to the velocity of the mobile station. This paper shows that the symbol error rate and the signal-to-noise ratio are important factors for the determination of the channel estimation filter size.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.169-173
• /
• 2014

In order to satisfy user's requirements of needs for various services and to efficiently use of frequency, a communication system using one platform can support many communication services. Tunable filters must be used in the front end of broadband communication systems which provide and support various communication methods. In this paper we design and implement a filter bank to verify the feasibility of cavity tunable filter with the operation frequency of 800 MHz ~ 1600 MHz. The filter bank is composed of five bandpass filters and each bandpass filter has the same operation frequency band of the tunable filter. The implemented filter bank has the maximum insertion loss of 0.326 dB, the bandwidth of 37 MHz ~ 84 MHz, and the attenuation of minimum 19.974dB and mximum 37.812dB at the band edge ${\pm}60MHz$ over the operating frequency band.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.315-315
• /
• 2006

• 전기의세계
• /
• v.38 no.9
• /
• pp.28-34
• /
• 1989

본고에서는 주로 전자장비간에 발생하는 EMI를 억제하기 위한 방안으로 장비 자체를 도전성 케이스를 씌워 EMI의 전파경로를 파괴하는 것과 고대역제거필터를 전원 바로 뒤에 달아서 EMI의 원인이 되는 고주파성분의 전류 및 전압 자체를 제거하는 것 뿐 만 아니라 장비내부의 배선 및 접지를 적절히 취하여 EMI의 전파효율을 낮추도록 하는 것을 기술하였다.