• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.366-372
• /
• 2006

This study is to investigate the physicochemical properties of differently pretreated chestnut starches during starch isolation and to examine their gelatinization properties by both heat and alkali treatments. One kind is starch A made by alkali method from peeled chestnut. The other is starch B made from chestnut with the outer layer. The results are as follows. Starch A has higher water binding capacity of 86.9% than starch B with 80.66%. Swelling powers of both starch A and B increased rapidly from $60^{\circ}C\;to\;80^{\circ}C$ in both, and since then it has changed a bit. Both began to show their solubility at $60^{\circ}C$ and increased continuously as the temperature went up. Starch A has higher swelling power and solubility than starch B. In iodine reaction, starch A has higher ${\lambda}max$ and absorbance at ${\lambda}max$ than starch B. X-ray diffraction patterns showed that starch A is type $C_b$ and that starch B is type B. Starch B has higher relative crystallinity of 37.0% than starch A with 36.2%. The results by differential scanning calorimetry revealed that starch A gelatinized from $66.95^{\circ}C$ to $77.5^{\circ}C$ and its enthalpy is 2.04 cal/g. And starch B gelatinized from $67.09^{\circ}C\;to\;77.5^{\circ}C$, and its enthalpy is 2.29 cal/g. Amylograms of chestnut starch at 6.5% concentration indicated that starch B needs higher onset temperature when beginning to gelatinize than starch A does. But starch A shows much higher peak viscosity, breakdown and setback than starch B does. Starch A shows higher viscosity, gel volume, and optical transmittance in gelatinization properties by alkali than starch B does.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.191-197
• /
• 2018

This study investigated the influence of starch extraction (ST-EX) solutions on the extraction yield and characteristics of Chinese yam (CY) starches from domestic Dioscorea batatas. Ascorbic acid (VitC), $Na_2S_2O_3$, $NaHCO_3$, and $Na_2CO_3$ were used as ST-EX solutions (0.4%, w/v). The extracted CY starches were examined for ST-EX yield, chemical composition, size distribution, X-ray diffraction, solubility, swelling power, gelatinization, and pasting viscosity. The highest ST-EX yield was obtained from $NaHCO_3$, followed by VitC. Lower protein content, relative crystallinity, and gelatinization enthalpy were found in CY starches from alkaline ST-EX solutions ($NaHCO_3$ and $Na_2CO_3$). Size distribution and gelatinization temperature did not generally differ for CY starches from the different ST-EX solutions. Pasting viscosities increased in the order from $Na_2CO_3$ > $Na_2S_2O_3$ > $NaHCO_3$ > VitC ST-EX solutions. Thus, VitC may be most appropriate to extract CY starch from Dioscorea rhizomes, considering its ST-EX yield, total starch content, and variation in pasting viscosity.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.613-619
• /
• 2010

Three varieties of taro flours (Altoran, Josaengjong, and Jaeraejong) were analyzed to evaluate their nutrient composition and physicochemical properties. Moisture contents of the three taro cultivars varied from 5.74-10.30%. Among the three cultivars, Altoran flour had higher protein and fat contents than other cultivars. There were 17 kinds of amino acids in the three taro flours. The major fatty acids in the three taro flours were linoleic acid (46.5-51.4%), palmitic acid (21.7-25.8%), and oleic acid (12.3-18.7%), and two thirds of the total fatty acids were unsaturated fatty acids. Potassium, phosphorus, magnesium, and calcium were the most plentiful minerals in the three taro flours, and the free sugars were glucose, fructose, and sucrose. The total dietary fiber contents of the three taro flours ranged from 12.97 to 17.60%. From these results, Altoran contained a high level of dietary fiber, minerals, essential amino acids, and free sugars. Jaeraejong showed the highest water absorption index. The water soluble index of Altoran was higher than that of the other cultivars. From the differential scanning calorimeter results, the gelatinization temperatures of the three taro flours were $84.98-89.91^{\circ}C$. The pasting temperature of the three taro flours was from 46.77 to $49.30^{\circ}C$ by rapid visco-analyzer. Among these varieties, Josaengjong had the highest peak viscosity and final viscosity, whereas Altoran had the lowest. These taro cultivars are expected to be potential material for application in taro processed foods, due to their gelatination and pasting properties.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.905-913
• /
• 2003

The physicochemical properties of rice flour roasted at various temperatures and times were analyzed, and the quality characteristics of tarakjuk made from these roasted rice flours were investigated. As roasting temperature and time increased, rice flour showed decreasing moisture, protein content, and glucose the major reducing sugar of rice flour. Total amino acid content did not show any significant changes, but the amount of free amino acids and individual amino acids, such as lysine, tryptophane, and tyrosine, decreased. A decrease in L value and increases in a and b values from both roasted rice flour and tarakjuk was observed. Reduced crystallinity and gelatinization temperatures of roasted rice flour were investigated with X-ray diffractogram and DSC, respectively. The thermal transitions between $100.6{\sim}127.6^{\circ}C$ of tarakjuk by DSC are considered to be due to the melting of amylose-lipid complex. As the roasting temperature and time of rice flours increased, tarakjuk showed lower viscosity and higher spreadability. Sensory characteristics, such as nutty flavor, color intensity, and gritty texture increased significantly. Tarakjuk made from rice flour roasted at $185^{\circ}C$ for 25min showed the highest score on overall preference. From the above results, roasted rice flour produced more preferable tarakjuk than nonroasted flour in terms of sensory quality.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.273-280
• /
• 1989

The spectra of the $Co^{II}CyDTA$(CyDTA: cyclohexyldiaminetetraacetic acid) complex have been measured in aqueous solution of pH = 6-13.2. The red shift of the spectrum in the more basic solution was ascribed to the transformation of $CoCyDTA^{2-}$ into $CoCyDTA(OH)^{3-}$. The equilibrium constant, $K_{OH} = [CoCyDTA(OH)^{3-}]/[CoCyDTA^{2-}][OH^-]$ was $75M^{-1}$ at $40^{\circ}C$. The electron transfer reactions of $CoCyDTA^{2-}$ and $CoCyDTA(OH)^{3-}$ with $Fe(CN)_6^{3-}$ have been studied using spectrophotometric technique in the range of pH applied to the determination of equilibrium constant. The pseudo first-order rate constants observed ($k_{obs}$) were not changed upto pH = 10.8, but increased with increasing pH in the range of pH = $10.8{\sim}13.0$. The rate law reduced in the range of pH = 6-13 was $k_{obs} = (k_3[CoCyDTA^{2-}] + k_4[CoCyDTA(OH)^{3-}])/(1+K_1[CoCyDTA^{2-}])$. The rate constants of the reactions (3a) and (3b), $k_3$ and $k_4$ respectively have been determined to be 0.529 and $4.500M^{-1}sec^{-1}$ at $40^{\circ}C$. The activation entropies (147{\pm}1.1JK^{-1} mol^{-1}$ at pH = 10.8) and activation volumes $(6.25cm^3mol^{-1}, pH = 10.8)$ increased with increasing pH, while the activation enthalpy (12.44 ${\pm}$ 0.20 kcal/mole) was independent of pH. Using the pH effect on the rate constants, the activation entropies and the activation volumes, the mechanism of the electron transfer reaction for $Co^{II}-Fe^{III}$ system was discussed.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.392-398
• /
• 2015

The physicochemical properties of spray-dried rice flour with Lactobacillus plantarum CGKW3 were investigated. Amylose and damaged starch contents of spray-dried rice flour (S10, S20, S30, and S50) with L. plantarum CGKW3 were 14.18~17.75% and 24.65~34.08%, respectively. The particle size of spray-dried rice flour was $82.28{\sim}131.17{\mu}m$. The rice flour with L. plantarum CGKW3 showed a good powder flowability. The water absorption and water solubility of spray-dried rice flour were 1.96~2.13 and 9.91~21.95%, respectively. Thermal properties measured by differential scanning calorimeter revealed that the enthalpy (${\Delta}H$) for starch gelatinization were highest in the rice flour (S50) with L. plantarum CGKW3. When compared, the viable cell number of spray-dried rice flour were found to be in the following order: S10 (5.78 log CFU/g) < S20 (6.38 log CFU/g) < S30 (6.69 log CFU/g) < S50 (7.11 log CFU/g). The survaival rate of L. plantarum CGKW3 was 60.02-73.85%, which reflected the improvement in the quality of rice flour with an increase in treatment concentration. Based on our results, spray-dried rice flour with L. plantarum CGKW3 could be used in various types of rice foods.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.765-772
• /
• 2004

Cooking condition of Tarakjuk (milk-rice porridge) was established based on gelatinization temperature using differential scanning calorimetry (DSC) of roasted Ilpum rice flour, which has highest enzyme-resistant starch (RS) content. Effect of cooking temperature and time on DSC characteristics, crystallity with X ray diffractogram, RS content, in vitro starch digestibility (IVSD), amino acid composition, and in vitro protein digestibility (IVPD) of Tarakjuk were determined. Tarakjuk was cooked at 50, 56.5, 64, and $69^{\circ}C$ for various durations. Rice flour ingredient used was Ilpum, previously roasted at $185^{\circ}C$ for 25 min. Tarakjuk cooked at 50 and $56.5^{\circ}C$ showed two thermal transitions between $63.7-125.2^{\circ}C$ as determined by DSC, corresponding to endotherms of starch gelatinization $(63.7-73.8^{\circ}C)$ and melting of amylose-lipid complex (AM-lipid complex, $97.7-125.2^{\circ}C$), whereas that cooked at 64 and $69^{\circ}C$ showed only AM-lipid complex melting transition between $96.9-127.6^{\circ}C$. As cooking temperature increased, RS content of Tarakjuk decreased, whereas IVSD increased. Total amino acid content was between 11,558-15,601mg/100g, depending on cooking condition used. Compared with conventionally made control, contents of essential amino acids, such as lysine and tryptophane, were higher at 50 and $56.5^{\circ}C$, and IVPD showed higher increase. Results reveal degree of gelatinization in Tarakjuk with high RS content as well as low IVSD and high IVPD, which are important from physiological and nutritional point of view, can be produced by controlling cooking condition.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.776-782
• /
• 2005

The effects of purification using ${\alpha}-amlyase$ (Termamyl 120L) on physicochemical properties of ${\beta}-glucan$ from oat bran were studied. Four fractions were selected as fraction A ($55^{\circ}C$, 15%, pH 6), fraction B ($45^{\circ}C$, 15%, pH 6), fraction C ($50^{\circ}C$, 0%, pH 7), and fraction D ($50^{\circ}C$, 10%, pH 5) from the result of physiological test, and three consecutive subfractions were obtained by repeated ${\alpha}-amlyase$ treatments on the each fractions. The contents of ${\beta}-glucan$, protein, and ash after purification were in 81.4-88.2%, 4.1-6.3% and 2.6-6.2%, respectively. The apparent viscosities of purified ${\beta}-glucan$ aqueous solutions were similar to those of hydroxy methyl cellulose. Glucose was a major monosaccharide of ${\beta}-glucan$ extracts, and xylose and arabinose were also detected as minor constituents on TLC. The average molecular weight ranged $2.0{\times}10^6-5.1{\times}10^6$ and was decreased after purification. From the result of the differential scanning calorimetry, the melting point ranged $130-140^{\circ}C$ with purification step and thermal transition enthalpy was increased. The ratio of ${\beta}-(1{\rightarrow}3)\;to\;{\beta}-(1{\rightarrow}4) $ linkages were 1:2.22-1:2.52, and increased up to 1:5.50 after purification.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.223-234
• /
• 2016

This study aimed to the adsorption-removal of high- radioactive iodide (I) contained in the initially generated high-radioactive seawater waste (HSW), with the use of AgX (Ag-impregnated X zeolite). Adsorption of I by AgX (hereafter denoted as AgX-I adsorption) was increased by increasing the Ag-impregnated concentration in AgX, and its concentration was suitable at about 30 wt%. Because of AgCl precipitation by chloride ions contained in seawater waste, the leaching yields of Ag from AgX (Ag-impregnated concentration : about 30~35 wt%) was less than those in distilled water (< 1 mg/L). AgX-I adsorption was above 99% in the initial iodide concentration ($C_i$) of 0.01~10 mg/L at m/V (ratio of weight of adsorbent to solution volume)=2.5 g/L. This shows that efficient removal of I is possible. AgX-I adsorption was found to be more effective in distilled water than in seawater waste, and the influence of solution temperature was insignificant. Ag-I adsorption was better described by a Freundlich isotherm rather than a Langmuir isotherm. AgX-I adsorption kinetics can be expressed by a pseudo-second order rate equation. The adsorption rate constants ($k_2$) decreased by increasing $C_i$, and conversely increased by increasing the ratio of m/V and the solution temperature. This time, the activation energy of AgX-I adsorption was about 6.3 kJ/mol. This suggests that AgX-I adsorption is dominated by physical adsorption with weaker bonds. The evaluation of thermodynamic parameters (a negative Gibbs free energy and a positive Enthalpy) indicates that AgX-I adsorption is a spontaneous reaction (forward reaction), and an endothermic reaction indicating that higher temperatures are favored.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.252-257
• /
• 2000

The physicochemical and pasting properties of amaranth starches isolated from five cultivars, Andy, Suvarna, Nu World, K266-1, K432, grown in Korea, were investigated. The shapes of starch granules were all polygonal and size was in the range $1.14{\sim}1.48\;{\mu}m$ for all five cultivars. X-ray diffractograms were shown typical A type diffraction patterns for all amaranth starches. The protein and crude lipid contents of starches were $0.13{\sim}0.23%$ and $0.01{\sim}0.05%$, respectively. The apparent amylose contents ranged from $2.79{\sim}4.35%$ and the water binding capacities were $128.05{\sim}135.80%$. The transmittances of 0.1% amaranth starch suspensions except K266-1 increased rapidly above $65^{\circ}C$, thereafter increased slowely. The initial pasting and peak temperature ranges of five cultivars by RVA were $71.3{\sim}73.7^{\circ}C$ and $81.5{\sim}84.0^{\circ}C$, respectively. The peak and cooling viscosities followed the order : Nu World>Andy>Suvarna>K432>>K266-1. Nu World was shown the highest peak (166), final (103) and cooling viscosities (30 RVU). K266-I exhibited the lowest setback (-38) of all five cultivars. Gelatinization (To) and peak temperature (Tp) of amaranth starches in DSC thermograms were $65.7{\sim}68.0^{\circ}C$ and $70.6{\sim}75.8^{\circ}C$, respectively. Enthalpies followed the order: K266-1