• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.1
• /
• pp.35-44
• /
• 2000

The winter case of the near-field dilution at the Masan outfalls has been studied by field measurements and CORMIX model simulations. Dilution rates of the wastewater discharge in winter were obtained by a salinity deficit method using the field data observed in the neap tidal period of February, 1999. The observed dilution rates in winter season were found to be very high in the range of 90～130 due to the isopycnal mixing of ambient density compared with the summer range of 30～40 under weak neap tidal currents. The results of CORMIX model simulations also show that the winter dilution rates under a weak ambient current(Ua=6.0ms/s) were increased by 3-fold of the summer dilution rates. However, the difference between two seasons becomes small by 30% under a strong current(Ua=15.5cm/s). This result indicates that the dilution and hydrodynamic mixing process of the effluents are more influenced by ambient crossflow condition than by ambient density stratification at the outfalls site.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.1
• /
• pp.15-24
• /
• 2007

This study is focused on fellowing two issues for simulating colored paper mosaic. The first one is paper tile generation, and the other one is arrangement. At first we define the paper data as two layered polygon. Then, generate paper tile from paper data, and attach it on the best location of canvas according to energy value. The proposed method in this study has some benefits like follow. First, we can obtain more natural shaped paper tile because the phase is similar to real process of fearing paper. Second, if we redefine the structure of paper like newspaper, magazine and so on, the result can be generated with the variable type of paper. And lastly, by adjusting parameters of energy function, we can control the position of the torn paper.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.65-68
• /
• 2008

This paper verified the lateral resisting capacity of CFT column-RC flat plate connection in comparison with general RC column-flat plate connection and detected moment capacity and ductility capacity of connection according to lateral force-displacement ratio. We made and tested specimens which have different variables respectively and as a result derive a following conclusion. In CFT specimen a critical section was extended and initial stiffness and moment increased 35%, 25$^{\sim}$35% respectively in comparison to general RC column specimen. In all specimens generally shear governed behaviors and in CFT specimen complemented with seismic band, flexure behavior region of slab was extended and also ductility ratio and energy absorptance increased.

• Journal of the Korean Geographical Society
• /
• v.48 no.3
• /
• pp.321-335
• /
• 2013

High resolution data for the coastal sand beach during short-term in Jinbok-ri, Uljin-gun, Gyeongsangbuk-do are obtained by terrestrial LiDAR. The micro-geomorphological changes of 8 times before and after the strong low-pressure events during June to September, 2009 and changes under the various environments of wave-energy are investigated in the study. The obvious geomorphological changes between the northern and southern sand beach in Jinbok-ri are revealed by terrestrial LiDAR as well as by grain size analysis. The strong waves by the typhoons decrease the area and volume of the beach, and especially the area is largely influenced. The erosive and depositional processes dominate the northern and southern sand beach, respectively, after high wave in September. These results suggest that lots of sand grains in the beach are largely re-transported within the beach rather than offshore.

• Journal of Hydrogen and New Energy
• /
• v.23 no.3
• /
• pp.219-226
• /
• 2012

A nuclear fusion fuel cycle plant is composed of various subsystems such as a hydrogen isotope storage and delivery system, a tokamak exhaust processing system, and a hydrogen isotope separation system. Korea shares in the construction of the International Thermonuclear Experimental Reactor fuel cycle plant with the EU, Japan and US, and is responsible for the development and supply of the storage and delivery system. We thus present details on the hydrogen isotope process safety. The main safety analysis procedure is to use a hazard and operability study. Nine segments were studied how the plant might deviate from its design purpose. We present a detailed description of the process, examine every part of it to determine how deviations from the design intent can occur and decide whether these deviations can give rise to hazards. We determine possible causes and note protective systems, evaluate the consequences of the deviation, and recommend actions to achieve our safety goal.

• Journal of Hydrogen and New Energy
• /
• v.23 no.4
• /
• pp.346-352
• /
• 2012

The properties of methane oxidation were studied in this research over transition metal containing $CeO_2$ (TM/$CeO_2$, TM=Ni, Co, Cu, Fe) with TM content of 5 wt. % at atmospheric pressure. The characteristics of catalysts were investigated by various characterization techniques, including XRD, GC, SEM and EPMA analyses. The catalytic tests were carried out in a fixed Rmix ratio of 1.5 ($CH_4/O_2$) in a fixed-bed reactor operating isothermally at atmospheric pressure. Only the Ni/$CeO_2$ catalysts showed syngas production above $400^{\circ}C$ via typical partial oxidation reaction whereas other catalysts induced complete oxidation resulting in the production of $CO_2$ and $H_2O$ in whole reaction temperature range. From the quantitative analysis on carbon deposition after catalytic tests, Cu/$CeO_2$ was found to show the highest resistance on carbon deposition. Therefore Cu can be proposed as an efficient catalyst element which can be combined with a conventional Ni-based SOFC anode to enhance the carbon tolerance.

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.677-684
• /
• 2016

Various commercially available gas diffusion layers (GDLs) from different manufacturers were used to prepare an air electrode using $La_{0.8}Sr_{0.2}CoO_3$ perovskite (LSCP) as the catalyst for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in an alkaline solution. Various GDLs have different physical properties, such as porosity, conductivity, hydrophobicity, etc. The ORR and OER of the resulting cathode were electrochemically evaluated in an alkaline solution. The electrochemical properties of the resulting cathodes were slightly different when compared to the physical properties of GDLs. Pore structure and conductivity of GDLs had a prominent effect and their hydrophobicities had a minor effect on the electrochemical performances of cathodes for ORR and OER.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.626-628
• /
• 2018

In this paper, we compare the performances of SVM (Support Vector Machine) and ANN (Artificial Neural Network) machine learning models for predicting solar energy by using meteorological data. Two machine learning models were built by using fifteen kinds of weather data such as long and short wave radiation average, precipitation and temperature. Then the RBF (Radial Basis Function) parameters in the SVM model and the number of hidden layers/nodes and the regularization parameter in the ANN model were found by experimental studies. MAPE (Mean Absolute Percentage Error) and MAE (Mean Absolute Error) were considered as metrics for evaluating the performances of the SVM and ANN models. Sjoem Simulation results showed that the SVM model achieved the performances of MAPE=21.11 and MAE=2281417.65, and the ANN model did the performances of MAPE=19.54 and MAE=2155345.10776.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1900-1911
• /
• 2015

In this paper, we introduce backscatter communication for power-limited sensors to enable long-range transmission in wireless sensor networks, and envision a way to avoid doubly near-far problem in wireless-powered communication network (WPCN) with this technology. In backscatter based WPCN, users harvest energy from both the signal broadcasted by the hybrid access point and the carrier signal transmitted by the carrier emitter in the downlink, and then transmit their own information in a passive way via the reflection of the carrier signal using frequency-shift keying modulation in the uplink. We characterize the energy-free condition and the signal-to-noise ratio (SNR) outage zone in backscatter based WPCN. Further, we propose backscatter based harvest-then-transmit protocol to maximize the sum-throughput of the backscatter based WPCN by optimally allocating time for energy harvesting and information transmission. Numerical results demonstrate that the backscatter based WPCN increases significantly the transmission range and diminishes greatly the SNR outage zone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.239-246
• /
• 2014

In the context of wireless sensor networks, one of major issues is energy conservation. For low power communication, by utilizing our experimental results for the relation between clock drift and synchronization interval, we designed a new protocol which can support a wide range of duty cycles for applications with very low traffic rate and insensitive delay. The transmission (TX) node in the protocol synchronizes with the reception (RX) node very before transmitting a packet, and it can adaptively estimate the synchronization error size according to the synchronization interval from minutes to hours. We conducted simulations and a testbed implementation to show the efficacy of the proposed protocol. We found that our protocol substantially outperforms other state-of-the-art protocols, resulting in order-of-magnitude increase in network lifetime over a variety of duty cycles.