• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.209-228
• /
• 2006

The learning effect is one of the theoretical frameworks that examine the mechanisms of the deployment of energy technologies. The objective of this paper is to provide a theoretical overview and a critical analysis of the literature on the experience curve for energy technology. For these objectives, we review a couple of theoretical aspects and applications and investigate the sources of learning and cost reductions to grasp the mechanisms of teaming effect. Finally we conclude some insights from our theoretical reviews.

• Journal of the Korean Chemical Society
• /
• v.59 no.6
• /
• pp.508-519
• /
• 2015

In this study, the pre-service chemistry teachers’ understanding of potential energy curve was investigated. The subjects were 24 junior students and 26 senior students studying chemistry education in a college of education. A concept questionnaire consisted of thought experiments with different initial conditions was developed to survey the pre-service teachers’ conceptions of potential energy curve. The survey results showed that the pre-service chemistry teachers had difficulties to accept the negative values for potential energy and total energy. And they knew the mechanical energy conservation but they could not apply it properly to the thought experiment situations given in the questionnaire. Also they had the knowledge about the direction of force exerted between the two balls, but many of them believed that the balls would stop moving at the bottom of potential energy curve well. In addition, it was discovered that few pre-service teachers could relate the thought experiments to the chemical bonding, the liquefaction of gas, and the molecular vibration.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.468-473
• /
• 2004

본 연구에서는 기존의 ㅡ자형, ㄴ자형, ㄷ자형 조파시스템이 경사진 방향으로 가동될 때 발생되는 에너지의 불연속성으로 인한 회절철상이나 구조물에서 반사된 파가 조파판에서 발생하는 재 반사 철상의 단점을 보완할 수 있도록 곡선형태의 조파판을 배치하여 수치실험을 행하였다. 조파판을 곡선형으로 배치시켜 실험 대상물에서부터 반사된 파가 가능한 조파판에 직각으로 부딪치도록 유도하였다. 편미분 격자생성기법을 도입하여 구성된 곡선형 격자망에서 Copeland(1985)의 완경사 방정식을 이용하여 수치해석 하였다. 우선, 1차원 실험영역에서 파를 생성하여 대상구조물에서 반사되어 돌아온 반사파 성분을 조파판에서 흡수하면서 입사파를 생성하는 현상을 재현하였다. 그 후, 실험영역을 2차원으로 확장시켜 조파판을 곡선형으로 배치하여 수치 실험하여 진행파와 회절파의 중첩으로 고안된 해석해와 수치 해를 비교하려다. 그 결과, 기존의 조파시스템에 비하여 에너지 불연속선에서의 회절 현상도 발생하지 않고 반사파 성분을 효율적으로 흡수하는데 효과적임을 알아냈다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1962-1969
• /
• 1999

Active contours are deformable energy minimizing curves controlled by internal energy and external energy. The internal energy is constraint to preserve a smooth curve, and the external energy guides the curve towards image features. B-spline representation of active contours can be of great benefits in the segmentation and description whose shape is characterized by its defining polygon or control points. Menet et al proposed B-spline representation of active contours based on dynamic programming. The method is simple and efficient by comparing over finite difference method.

• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.115-118
• /
• 1995

We predict the magnetization curves with strains in thin films. It is possible to predict the magretoelastic ani¬sotropy erergy which generates the changes of the M-H curves in thin films. We show the prediction of M-H curves in case of isotropic films such as polycrystalline am amorphous thin films as well as single crystal cubic films.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.141-146
• /
• 2014

This paper suggests a way of generating one-day load curves for performance improvement of peak shaving in a power system. This Peak Shaving algorithm is a long-term scheduling algorithm of PMS (Power Management System) for BESS (Battery Energy Storage System). The main purpose of a PMS is to manage the input and output power from battery modules placed in a power system. Generally, when a Peak Shaving algorithm is used, a difference occurs between predict load curves and real load curves. This paper suggests a way of minimizing the difference by making predict load curves that consider weekly normalization and seasonal load characteristics for smooth energy charging and discharging.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.419-429
• /
• 1992

본 연구에서는 면외 변형이 가능한 평면 곡선보에 수정 형상함수를 적용하여 탈락성 및 지속성 에너지에 포함된 가성구속에 의한 수치해의 거동을 고찰함과 동시에, 가성구속에 의한 오차 발생 요인이 제거된, 면외 변형이 가능한 평면 곡선보의 선형 요소를 제안하고자 한다.

• Solar Energy
• /
• v.2 no.1
• /
• pp.59-66
• /
• 1982

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.423-434
• /
• 2001

In this paper, a three-span continuous box girder is analysed by using elastic equation based on energy method, concerning the behaviour with the effects of bending and pure torsional moment. The statically indeterminate forces of a three-span continuous curved box girder are calculated by applying the principle of least work to this elastic equation. The influence line of shear force, bending moment, pure torsion, displacement and angle of rotation due to unit vortical load and unit torque for curved box girder are obtained. The internal forces of the curved box girder which the actual load is applied can be calculated using the influence line obtained from this study.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.123-132
• /
• 2010

To overcome the drawback of currently available curved beam theories having non-symmetric thin-walled cross sections, a curved beam theory based on centroid-shear center formulation is presented for the spatially coupled free vibration and elastic analyses. For this, the displacement field is expressed by introducing displacement parameters defined at the centroid and shear center axes, respectively. Next the elastic strain and kinetic energies considering the thickness-curvature effect and the rotary inertia of curved beam are rigorously derived by degenerating the energies of the elastic continuum to those of curved beam. In order to illustrate the validity and the accuracy of this study, FE solutions using the Hermitian curved beam elements are presented and compared with the results by centroid formulation, previous research and ABAQUS's shell elements.