본 논문은 고전압 양극성 펄스 모듈레이터에 대해 소개한다. 모듈레이터는 충전을 위한 공진형 컨버터와 고전압 펄스를 생성하기 위한 12개의 파워셀로 구성된다. 12개의 파워셀은 다중 권선 변압기를 통해 모든 셀이 병렬로 충전되며, 방전 시에는 모든 셀이 직렬로 연결되어 고전압을 생성한다. 12개의 파워셀을 구성하는 48개의 스위치에 절연된 전력과 신호를 동시에 공급하기 위해, 2개의 고전압 케이블로 구성된 양극성 컨트롤 루프가 설계되었다. 최종적으로 10kV, 100A, 3kHz 사양을 갖는 양극성 펄스 모듈레이터가 구현되었으며, 저항부하 및 리액터 부하조건에서 테스트 되었다. 실험결과를 통해 제안하는 양극성 펄스 모듈레이터의 신뢰성이 검증되었다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2015.05a
/
pp.109-110
/
2015
알루미늄 합금의 종류중 하나인 ADC12는 가공성이 좋고 가격이 저렴하기 때문에 산업의 많은 분야에 이용할 수 있지만 양극산화를 진행할 시 합금의 주요 구성성분인 실리콘(Si)으로 인해 균열(Crack)이 생기는 문제가 발생하여 이에 따라 균일한 산화막이 생성되지 않다는 단점을 가지고 있다. 이 단점을 극복하기 위해 양극산화를 진행할 때 금속 음이온 성분이 첨가된 전해질을 이용하면 실리콘이 떨어져 나간 부분을 자가치료(Self-healing)할 수 있어 피막의 경도를 포함한 각종 특성이 증가하는 결과를 확인할 수 있다. 본 연구에서는 ADC12를 양극산화할 때 황산 수용액을 기본 전해질로 하여 전해질에 타이타늄(Ti), 마그네슘(Mg), 몰리브덴(Mo)이 포함되어 있는 금속 음이온 물질을 첨가하였고, 금속 음이온 전해질의 농도와 양극산화 진행 시간을 변수로 하여 제조한 산화막의 전기화학적 특성을 SEM(Scanning Electron Microscope), Tafel plot, 그리고 Microvickers hardness tester를 통해 평가하였다.
본 논문은 파워셀 구조를 기반으로 설계된 양극성 펄스 전원장치에 대하여 소개한다. 파워셀은 풀브릿지 구조를 기반으로 설계되었으며, 833V를 출력하는 각 셀이 직렬로 연결되어 고전압을 생성하는 구조를 갖는다. 모든 파워셀의 방전 스위치를 구동하기 위해서 절연된 전력과 신호의 동시공급이 가능한 게이트 회로 구동방안이 제안되었다. 양극성 펄스 출력을 위한 파워셀의 각 래그의 단락을 방지하기 위한 게이트 회로가 설계되었다. 설계된 양극성 펄스 파워 모듈레이터의 동작을 검증하기 위해 테스트 회로가 구현되었다. 시험회로는 출력전압, 펄스 폭, 반복률 가변 조건에서 테스트 되었으며, 이를 통해 제안하는 양극성 펄스 파워 모듈레이터의 구조 및 게이트 구동회로의 신뢰성이 검증되었다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.66.1-66.1
/
2018
최근 자동차 배기가스 규제 및 전기자동차, 무인항공기 개발 등의 경량 소재에 대한 필요성이 지속적으로 증가하고 있다. 마그네슘 및 마그네슘 합금은 구조용 금속 소재 중 가장 밀도가 낮은 금속으로서 자동차, 항공, 기계 부품류 및 주방용품이나 전자제품 케이스류 등 다양한 산업분야에서 활용성이 크게 증가하고 있다. 하지만 마그네슘 합금은 화학적 반응성이 매우 크고 표면에 존재하는 피막의 치밀성과 화학적 안정성이 낮아서 쉽게 부식되는 단점이 있다. 따라서 내식성 향상을 위한 표면처리 기술 개발에 대한 필요성이 증대되고 있다. 양극 산화법은 금속표면에 양극 전류를 인가하여 산화피막을 인위적으로 형성시켜줌으로써 내식성을 향상시켜 주는 방법으로서 산업적으로 널리 사용되고 있는 표면처리 방법 중의 하나이다. 본 연구에서는 주석산나트륨의 농도에 따른 AZ31 마그네슘 합금의 양극 산화 피막 형성 거동을 연구하였다. DC 전류를 인가하여 양극산화 피막을 형성하였으며, 피막형성 전압 및 형성된 피막의 두께, 표면 거칠기 및 피막의 구조 등을 분석하여 주석산나트륨 농도에 따른 양극산화 피막의 형성 특성에 대하여 자세하게 고찰하였다.
Kim, Byung-Su;Kim, Seong-Yoon;Choe, Jae-Won;Joo, Yeon-Ho;Yoon, Dae-Hyun;Han, Nae-Jin;Kim, Yoo-Shin;Kim, Seon-Ok
Korean Journal of Psychosomatic Medicine
/
v.18
no.1
/
pp.19-29
/
2010
Objectives:Authors hypothesized that bipolar tendency of non-psychiatric person would be associated with stress vulnerability. To test the hypothesis, we compared perceived stress level, Type A Behavioral Pattern (TABP) and unhealthy lifestyle between person with and without bipolar tendency. Methods:The study cohort consisted of 1987 subjects without past and current psychiatric history. In this study, bipolar tendency was determined by MDQ response which requires endorsement of at least 7 of the 13 "yes or no" questions. We compared the scores of Perceived Stress Scale, A/B lifestyle questionnaire, and unhealthy lifestyle(alcohol, smoking, lack of exercise, irregular meal) between MDQ positive and negative respondents. Results:We identified the bipolar tendency group determined by the MDQ positive response were 329 subjects(16.6%). The overall score of the bipolar tendency group was significantly high on the A/B lifestyle questionnaire compared to the non-bipolar tendency group(125.4 vs. 115.9, p<0.001), and the rate of the subjects defined as TABP was also significantly high(41.3% vs. 30.1%, p<0.001). In comparison of subjectively perceived stress level, the bipolar tendency group was observed to be significantly higher than the non-bipolar tendency group (18.5% vs. 16.5%, p<0.001). The bipolar tendency group was significantly higher than the non-bipolar tendency group on the rate of answering:'irregular eating habit' (20.1% vs. 14.3%, p=0.002), '4-or-more-times alcohol intake per week' (29.8% vs. 16.5%, p<0.001), 'currently smoking' (41.9% vs. 23.0%, p<0.001), '2-or-less-times physical exercises per week' (63.2% vs. 55.1%, p=0.007). Conclusion:By clinical diagnosis, even a person who does not meet the criteria of bipolar disorder has a high risk of stress-related behavioral pattern, and perceived stress when possessing bipolar tendencies such as the (hypo) maniac tendency or affective instability. Such individual has significantly higher risk of having unhealthy life-style such as smoking, drinking, irregular eating habit and lack of exercise compared to non-bipolar tendency group. Since these risk factors lead to increase the risk of obesity, metabolic syndrome, diabetes, and cardiovascular diseases, the individual with the bipolar tendency requires a more effort to manage stress and to maintain healthy lifestyle.
Spherical lithium manganese oxide spinel, $Li_{1.10}Mn_{1.86}Al_{0.02}Mg_{0.02}O_4$ was prepared by wet-milling, spray-drying, and sintering process. In the spray-drying process, solid content in slurry was varied from 20 to 30 wt%. In the sintering process, the precursors have been sintered under air or $O_2$ atmosphere. While the as-prepared samples exhibit excellent electrochemical properties at room temperature, the discharge voltage profiles at 5.0C are very different one from another. The origin for the difference especially at initial state of discharge is oxygen defect. The sample prepared in air has larger capacity related to the plateau at 3.3 V (vs. $Li/Li^+$) which is caused by the oxygen defects than the one prepared in $O_2$. The difference of discharge voltage profiles especially at the final state of discharge comes from different diffusion rate of $Li^+$ ions. The sample prepared from 30 wt% solid content of slurry shows twice higher diffusion rate than the samples prepared from 20 wt% solid content, which is attributed to better compactness between primary particles for the sample prepared from 30wt % solid content than the one prepared by 20 wt%.
Kim, Min-Woo;Park, Seong-Soo;Sim, Seong-Ju;Kang, Tae-Ho;Shin, Yong-Bong;Ha, Yoon-Cheol
Journal of the Korean Electrochemical Society
/
v.14
no.4
/
pp.219-224
/
2011
Using an electrolyte additive, we examined, for the first time, a novel self-ordering regime of 160~200 V in high-field anodization which had been used for a fast fabrication of self-ordered anodic alumina nanotemplate. FE-SEM analyses conducted after the high-field anodization, pulse detachment and chemical widening of pores showed the relationship of 2.2 nm/V in this voltage range, which was identical to the previously reported one in the literature. The growth rate of the alumina film was about 60 um/hr, which was 30 times faster than that of phosphoric acid mild anodization. This study provides a new process for the fast fabrication of nanotemplates with interpore distances larger than 300 nm.
Kim, Younjung;Han, Ji Sun;Choi, Sik Young;Oh, In-Gyung;Hong, Yong Pyo;Ryoo, Keon Sang
Journal of the Korean Chemical Society
/
v.63
no.6
/
pp.446-452
/
2019
We have developed a method that can leach Co, Mn, and Ni in the cathode active material safely using lactic acid. When cathode active material was leached by lactic acid, lactic acid showed the highest efficiency at 2 N than 1 N and above 4 N concentration. When the cathode active material was added incrementally into the solution of lactic acid, the maximum solubility was 30 g/L at 2 N concentration. Oxalic acid was added in the solution of lactic acid and it showed that rare metals represent the most economical recovery efficiency at 4 g/L. Based on this study, it was found that the optimal condition for recovery of rare metals from cathode active material is oxalic acid : cathode active material = 7 : 1 as a ratio of weight. In addition, it was observed that the precipitate produced by oxalic acid is a polynuclear crystalline material bonded with 3 components of Co, Ni, and Mn.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.91-91
/
2018
스마트폰 및 카메라 케이스 등에 널리 적용되고 있는 알루미늄은 내식성, 내마모성과 같은 물리적, 화학적 성질이 우수하지 못하여 이를 향상시키기 위해 양극산화법이 산업적으로 널리 이용되고 있다. 알루미늄에 양극산화법을 적용하면 강도, 내마모성 및 내식성이 향상될 뿐만 아니라 알루미늄 표면에 규칙적으로 배열된 30nm~100nm 크기의 pore에 염료를 흡착시켜 다양한 색상의 외관을 가지는 양극산화피막을 형성시킬 수 있다. Pore간의 간격은 수십 nm~수백 nm 정도이며, pore의 크기와 간격 및 깊이는 양극산화조건(양극산화 전압, 전해액의 종류와 농도 및 온도)에 의해 크게 변화한다. 본 연구에서는 CTSA를 통한 AA5052합금의 양극산화 착색처리와 내식성의 개선 여부를 조사하였다. 알루미늄은 Al5052에는 Mg 외에, 소량의 Si을 포함하고 있다. 이 Si는 알루미늄 표면에 석출물 형태로 존재한다. 이 Si 석출물은 양극산화 시 기지상의 알루미늄 표면의 pore 형성을 방해하는 원인이다. 이러한 Si 석출물의 존재가 균일한 pore 형성을 방해하게 되고, 불균일한 포어를 가지는 표면은 착색처리 시 색상의 편차를 크게하는 원인이 되어 불량률을 높인다. 이러한 요인을 개선하기 위해 CTSA의 처리조건을 최적화 하였다. Al5052 합금을 이용하여 에칭, 디스머트, CTSA처리를 실시하였다. $55^{\circ}C$ 100g/L NaOH 용액에서 에칭을, $25^{\circ}C$ 10 vol.% $HNO_3$ 용액에서 디스머트를 실시한 다음, CTSA의 조건을 다르게 하고 SEM을 통해 Si 석출물의 감소율을 비교하였다. CTSA조건으로는 시간(60s, 180s, 300s), 농도(10%, 20%, 30%, 40%) 및 온도($25^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$, $60^{\circ}C$)를 변화시켰으며, CTSA 처리 전과 후의 시편의 위치를 동일하게 하여 비교하였다. 결과 적정 시간, 농도, 온도 조건하에 pore를 불균일하게 하는 Si 석출물들이 제거되는 것을 확인할 수 있었다. CTSA 처리는 온도가 높을수록, 시간이 길수록, 농도가 적당히 진할수록 석출물이 잘 제거되는 것을 확인하였다. 또한 CTSA처리가 알루미늄의 내식성에 미치는 영향을 확인하기 위해서 침적시험에 의한 무게감소율 및 전기화학측정을 실시하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.