• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.448-452
• /
• 2010

The traditional Aids to Navigations(AtoN) have been ensuring the safety of ships by indicating the passage and dangers by depending on the flashing lights. But the more the industrial complex behind port which is all over the country involving the Ulsan port developed, the more the lights behind port is stronger, and then the distinguishment of the signal of AtoN from the lights behind port is more difficult. And It is urgently needed to prepare the counterplan about the ensurement of safety because the authorities levels up the limit tonnage of the ships which are sail in and out during night to improve the operation of port through reducing of the traffic jam So, the method of direct lighting like LED non-neon is applied to unmanned lighthouses or light beacon, and the LED flashing number plate is applied to light buoys whose light power is weaker than to improve distinguishment and to be easy positioning of ships. As a result, the users of Ulsan port comment favorably on this item and the development of AtoN must be continuos to overcome the lights behind port.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.685-694
• /
• 2016

Visibility of lane marking is impaired at night, or in case of rain, and thereby threatens traffic safety. Recently, various studies and technology have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment, improvement of lane marking visibility (32.7%) by applying phosphorescent material mixed paint, and expressway lane design standards alternative (length 6m, gap 12m, width 13cm: 27.8% of painted surface are reduced) adoption with ergonomic analysis. In this study, a set of cost-benefit analyses was performed for the cases where such techniques were applied. Based on the literature review, 26.9% of traffic accidents would be prevented by improving lane marking visibility by 32.7%; accident reduction benefit was calculated as much as 12.5 billion KRW. Meanwhile, total increased cost when introducing phosphorescent material mixed paint and lane design standards alternative is calculated as 30.6 billion KRW. However, economic feasibility could not be secured with 0.41 of cost-benefit ratio when applied to the expressway network as a whole. Additionally, cost-benefit (B/C) analysis was applied to each of the top 20 night accident hot spots and the results of B/C ratios were between 0.67 and 4.20, showing that 11 out of 20 spot sections of expressway can have economic feasibility. This results indicate, with this kind of pavement marking applied to accident hot spots in rural expressway, better visibility and economic feasibility can be guaranteed through traffic accident reduction. Some limitations and future research agenda have also been discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.329-332
• /
• 2015

야간에 자동차를 운행할 때 검정색 차량 같은 어두운 색상의 자동차는 운전자가 인지를 못하는 경우가 많고 안개가 짙게 낀 상황도 운전자의 시야가 좁아져 교통사고율이 급격하게 증가한다. 도로교통공단의 자료에 의하면 최근 5년(2009~2013) 동안 가해자의 안전거리 미확보로 인한 교통사고는 매년 감소하는 것으로 나타나지만, 안전운전 의무 불이행 다음으로 두 번째로 높은 사고 건수를 기록하고 있다. 이는 아직도 운전자의 시인성 저하에 대한 방안이 부족하기 때문이다. 시인성 저하를 위한 대책으로 BMW, AUDI, Benz 회사에서 적외선 카메라를 이용한 나이트 비젼이 있으나 거리감지기능이 없어 디스플레이를 계속 주시하면서 운행하여야 하므로 시야가 좁아져 다른 위험이 발생할 수 있다. 현재 시중에 제공되고 있는 적외선 나이트 비젼 카메라를 이용하였을 때 일반 시야보다 약 4배 정도의 거리를 인식할 수 있었고, 이러한 나이트 비젼의 장점을 활용하여 전면 차량과의 안전거리를 확보하는 시스템을 제안한다. 본 논문에서는 제시하는 시스템은 시인성이 떨어지는 환경을 가정하여 설계하였고 나이트 비젼 카메라를 이용해 디스플레이로 출력하여 육안으로 구분할 수 없는 물체도 인지할 수 있어 헤드라이트를 켜고 운행할 때보다 안전한 운행을 할 수 있을 것으로 보인다. 하지만 디스플레이를 지속적으로 주시하며 운행할 경우 거리 감각이 떨어져 근접해 오는 물체와의 충돌 사고를 막기 힘들 것으로 보인다. 따라서 이러한 단점을 보안하기 위해 영상 데이터를 활용하여 앞 차량의 유무를 파악하고 차량이 있을 때 안전거리를 디스플레이에 표시함으로 앞 차량과의 거리를 유지하여 사고를 예방하여 안전 운행이 가능하도록 설계하였다.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.25-38
• /
• 2021

The aim of this study is to protect workers and pedestrians from accidents at night or bad weather by attaching optical fiber to existing safety clothing that is made only with fluorescent fabrics and retroreflective materials. A safety vest was designed and manufactured by applying optical fiber, and energy-harvesting technology was developed. The safety vest was designed to emit light using the automatic flashing of optical fibers attached to the film, and an energy harvester was manufactured and attached to drive the light emission of the optical fiber more continuously. As a result, first, the vest wearer' body was recognized from a distance through the optical fiber and retroreflection, which helped prevent accidents. Thus, this concept helps in saving lives by preventing accidents during night-time work on the roadside or activities of rescue crew and sports activities, or by quickly finding the point of an accident with a signal that changes the optical fiber light emission. Second, to use the wasted energy, a piezoelectric-element power generation system was developed and the piezoelectric-harvesting device was mounted. Potentially, energy was efficiently produced by activating the effective charging amount of the battery part and charging it auxiliary. In the existing safety vest, detecting the person wearing the vest is almost impossible in the absence of ambient light. However, in this study, the wearer could be found within 100 m by the light emission from the safety vest even with no ambient light. Therefore, in this study, we will help in preventing and reducing accidents by developing smart safety clothing using optical fiber and energy harvester attached to save lives.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.445-451
• /
• 2012

Visual changes and speed changes in curved sections of highways are more dangerous than straight sections According to the enquetes conducted by Coalition for Transportation Culture in 1999, about 78% of drivers are dissatisfied with traffic guide and safety signs, with lack of visibility being the largest reason with about 27.9% of respondents indicating it as reason for dissatisfaction. In particular, the lack of visibility during nighttime or bad weather not only threatens driver safety due to poor delivery of information, but also affects the service level of highways. Because of this a new delineation must be installed and managed to enhance driver visibility. In this research, an optimal delineation system to enhance traffic safety is presented. In this research drivers effectively obtained information on highway alignment on the curved sections using a retro-reflection type delineation system and a newly-developed internal lighting delineation system to improve safety on the highways. A statistical comparison was conducted and analysis was done for the delineation systems that enhanced visibility through primary and secondary enquaetes. As a result, inside-lighting delineator will be selected in terms of safety at the curve sections. The inside-lighting delineator was more effective than the retro-reflection delineator on visibility, the necessity of reduction of speed and will reduce the hazard at curve sections. It is anticipated that when a delineation system based on this research is installed, a reduction in the number the number and severity of traffic accidents on curved sections will be reduced. In addition this system will more effectively provide drivers with information about highway alignment.

• Annual Conference of KIPS
• /
• 2013.11a
• /
• pp.1709-1712
• /
• 2013

교통 신호등은 운전자 혹은 보행자들의 뚜렷한 시인성 확보를 위해 가능한 주위 배경과 구분되는 색상, 모양, 질감 등으로 구성하여 설치되어 있는 특징을 가지고 있다. 결국 기존 교통 신호등 검출 연구들에서는 대부분 교통 신호등의 색상과 모양을 기반으로 한 검출 연구가 주류를 이루고 있는 것이 사실이다. 하지만, 외부 날씨, 복잡한 시내, 다른 물체와의 겹침 등의 문제로 인해 색상 및 모양 기반의 교통 신호등, motion blur, 검출 오류가 증가 되고 있다. 따라서 본 연구에서는 입력 영상에서 색상정보를 배제하고 motion blur나 밝기 변화에 덜 민감하고 먼 거리에서도 뛰어난 시인성을 가진 spot light 검출을 통해 입력 영상에서 가장 밝은 교통표지판 후보 영역들을 검출한다. 그리고 교통 신호등의 특징인 가능한 원형을 유지하고 있으며 원형 외부 색상과 내부 색상이 현저하게 두드러지는 영역을 maximally stable extremal regions (MSER) 알고리즘을 사용하여 입력 영상에서 후보 영역을 선택한다. 마지막으로, 검출된 영역들에서 교통 신호등 영역을 검출하기 위해 템플릿 매칭 방법을 적용한다. 제안한 방법을 도로 상에서 실험한 결과, 평균 94% 이상의 검출율을 제시하였고, 특히 야간 시간대에 검출율이 비교적 높게 제시되었다.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.181-187
• /
• 2016

Typical Retro-reflectors installed on road have problems such as limiting a driver's visibility at night when it is foggy or rainy. On the other hand, LED illuminated studs, called cat's eye system, extends a driver's visibility under these conditions. In this paper, we present a design of the LED cat's eye system using solar energy that can sustain vehicles with about 30-ton weight and is compliant with the IP68 code for water proof as IEC standard 60529. In addition, we propose a scheme of designing a LED driving circuit consuming low power to take into accounts cold weather or rainy season with limited sunlight. This LED cat's eye studs is currently installed and used on expressway and bike route nationally as well as overseas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.403-412
• /
• 2011

On a curve radius, there is speed deviation because a driver who is on the curve radius can have visual distortion. The curve radius can be more dangerous than a straight radius by many reasons. Especially, visibility paralysis of delineator that is because of night and bad weather. Can pervert the information about curve sections, it threatens safety. More over accident risk is increased by influence to travel speed. Therefore, it needs to build and control delineators for driver's visibility. Therefore, this study focus on finding the two types of delineator(the retro-reflection and inside-lighting delineator) by insight-surveying and the operating speed are compared by survey and operating speed. Finally, inside-lighting delineator will be selected in terms of safety at the curve sections. The inside-lighting delineator was more effective than the retro-reflection delineator on visibility, the necessity of reduction of speed and will reduce the hazard at curve sections. Also, the study analyzes safety is guaranteed by the slight reduction of speed when the driver enters a curve radius with inside-lighting delineator. As a result, the inside-lighting delineator can give the information about horizontal and vertical profile effectively, so it can reduce the accident risk. And it can use to improve traffic safety on curve radius.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.75-82
• /
• 2011

There is the uncertain period of the construction in case of the products meeting the quality standard of KS M 6080, the quality is degraded because of the abrasive loss of the paint caused by vehicle tires as the traffic amount increases and of the loss and detachment of the glass beads providing the retroreflective function. The abrupt degradation of visibility causes the high frequency of traffic accidents at night and increases the traffic accident rate. Additional supplementary construction induces the direct material and construction costs. As the more cost induction effect than the direct cost, the traffic jam caused by the additional construction increases the indirect social costs such as time cost and vehicle cost. Hence, the study is concerned with performing the abrasion resistance test based on the EN 1436 standard to check and improve the quality of various road marking materials resulting in improving the durability of road marking materials. However, even though the difference in the durability lifetime of resins(binders) is bibliographically or theoretically clear, there was no difference in the durability lifetime (retroreflectivity aspect) of the road marking paint using these binders. The reason is that the bonding of beads was very insufficient or that the cross density caused by crack or freshness was low. Moreover, the measured wet retroreflectivity was distributed as the Rw3 or higher class in average on the basis of EN 1436 but was very insufficient on the basis of the minimum wet threshold retroreflectivity with 100mcd/($m^2{\cdot}lx$) managed overseas.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.85-93
• /
• 2016

According to Traffic Accident Statistics, the fatalities of accident while crossing is over represented. So, more active safety countermeasure should be considered to reduce the frequency and degree of severity of pedestrian-crossing involved accidents. The study analyses the safety effects of the Crossing Safety Assistant System which is composed of Led-embedded crosswalk lightings, text displayer and audio waning device for the safety consciousness both pedestrian and vehicles at crosswalk area. Operating speed of vehicles is reduced with statistical significance, and the level of vigilance expressed by pedestrian head movement to check out the vehicle existence is improved.