• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.182-185
• /
• 2008

최근 새로운 천연가스 수송/저장법으로 가스 하이드레이트 형성법이 주목받고 있다.본 연구에서는 천연가스의 저장 매체로 다공성 매질인 실리카 젤을 사용하였다. 다공성 실리카 젤을 사용할 경우 물과 기체의 접촉면적을 극대화 시킬 수 있어 가스하이드레이로의 전환율을 높일 수 있다. 본 연구에서는 천연가스 주성분인 에탄과 프로판 기체를 사용하였으며, 기공의 직경이 각각 6.0 nm, 15.0 nm, 30.0 nm, 100.0 nm의 다공성 실리카 젤을 사용하였다. 에탄은 270 $\sim$ 285 K의 온도범위와 9 $\sim$ 25 bar의 압력범위, 프로판은 260 $\sim$ 280 K의 온도범위와 1.8 $\sim$ 2.8 bar의 압력범위에서 기공 크기의 분포를 고려하여 하이드레이트(H)-물($L_W$)-기상(V)의 3상 평형점을 측정하였다. 측정 결과 기공의 크기가 작아질수록 각각의 벌크 상태의 에탄 및 프로판 하이드레이트에 비해 하이드레이트의 평형조건이 온도는 낮아지고 압력이 높아지는 저해효과가 커짐을 알 수 있었다. 천연가스 수송/저장으로서 응용을 고려할 경우 저해효과가 적은 100.0 nm이상의 다공성 실리카 젤을 사용하는 것이 적절할 것으로 사료된다. 본 연구에서 얻어진 결과는 천연가스 수송/저장뿐만 아니라 심해저 천연가스 개발, 이산화탄소 심해저장 등의 가스 하이드레이트 용용 연구에도 유용한 기초 자료가 될 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.871-876
• /
• 2011

In this paper, the equilibrium flight conditions of a Korean Traditional Bangpae Kite with low aspect ratio were analyzed by it's aerodynamic data of wind tunnel test. The data of aerodynamic forces and center of pressure of the Kite were used to calculate the relative length of bridles to satisfy the condition of settling the kite to the static equilibrium steady state between ${\theta}=30^{\circ}{\sim}60^{\circ}$. From this equilibrium flight performance analysis, we obtained ($0.88{\pm}0.02$)c of the rear bridle length corresponding to 0.88c of fixed front bridle length. These results were exact agreement with the relative bridle lengths by Korean classical method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.70.2-70.2
• /
• 2010

고순도 금속규소는 반도체, 태양전지 및 규소화 화합물 등의 원료로 사용되어왔으며, 최근 태양전지 시장 확대로 인해 고순도 금속규소의 수요가 증가하고 있다. 그러나 전량 수입 중인 고순도 금속규소의 수급 안정성과 품질 균일성 등이 문제가 되고 있어, 고순도 생산 공정 및 생산 에너지를 절감 공정에 관한 연구 개발이 필요한 실정이다. 이에 본 연구에서는 금속규소의 원료인 규석(SiO2)과 카본(C)의 환원반응을 온도와 압력별로 살펴보고, 평형 상태의 금속규소수율 조건을 알아보았다. 그리고 아크로 내부 위치에 따른 산화/환원 반응식을 고찰하여 주요 반응식의 깁스 자유 에너지를 비교 분석 하였다. 본 해석을 통한 실험용 아크로 제작과 기초실험을 통해 금속 규소 생산 수율 및 순도를 평가하였으며, 생산된 실리콘의 최대 순도는 약 99.8%로 측정되었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.74-83
• /
• 2011

For launcher applications, different from other applications, very high flow rate is required which can lead to supply pressure drop against required setting pressure. The supply pressure decrease is closely related to regulator characteristics. In this paper, supply pressure offset is investigated considering regulators as kinds of control systems. Pressure offset of self-operated regulator is analyzed with sensitive parameter defined as the ratio of valve travel to pressure offset. It is shown that pressure offset of self-operating regulator can be improved by incorporating proportional and integral controls and they can be materialized with pilot regulator systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.55-63
• /
• 2009

This paper reports on the theoretical and experimental study of the pressure ripples in a pressure unbalanced type vane pump which have widespread use in industry. Because they can infinitely vary the volume of the fluid pumped in the system by a control. Pressure ripples occur due to the flow ripples induced by geometry of side plate, leakage flow, reverse flow from the outlet volume produced by pressure difference between pumping chamber and outlet volume when the pumping chamber connected with the outlet volume. In this paper, we measured the pressure variation of a pumping chamber, reaction force on a cam ring, the mathematical model for analyzing the pressure ripples which included vane detachment and fluid inertia effects in notch area has been presented, and was applied to predict the level and the wave form of the pressure ripples according to operating conditions.

• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.1-8
• /
• 1999

A boundary condition reflecting automatically, regardless of the direction of the gas flow, the pressure drop due to the entrance and exit effect occurred at a connection of two elements with different cross-sections in calculating the pressure profile of a vacuum network composed of many chambers and pipes which have different shape and vacuum properties was developed. The method of correcting the pressure drop in an element of varying cross-section like a cone was also introduced to keep the system free from directionality. The developed boundary conditions are applied as an example to a linear composed vacuum system to show how to make a set of simultaneous equations based on the particle balance equation and how to obtain its solution.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.36-43
• /
• 2003

The analytic solution of radial displacements of thin cylindrical pressure vessel with carbon fiber T700/Epoxy orthotropic composites was obtained using equilibrium equations of the orthogonal curvilinear coordinate system. The governing equations with the simplified strain versus displacement relation of 3-dimensional curvilinear coordinate system were derived from the variational principle and the virtual work principle. Some theoretical analyses were presented and compared with the results of hydraulic tests for the pressure vessels with some various thicknesses. The results of the theoretical analysis and the hydraulic test were reasonably matched.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.7-19
• /
• 2019

In this study, a model was developed for estimating deliverability considering the pressure dependent permeability and predicting production profile with Material Balance Equation(MBE) for Coalbed Methane(CBM) fields. The estimated deliverability was compared with the conventional deliverability based on CBM well testing data with coefficient of determination($R^2$). As a result, the former was 0.76 and the latter was 0.69. It was confirmed that the deliverability which consider the pressure dependent permeability is more adoptable when representing the productivity of CBM fields. Through this process, in order to calculate pressure dependent permeability when well testing data exist, a method to infer reservoir pressure within the radius of investigation was proposed. The production profile of 31 gas wells was predicted for 15 years, using the estimated deliverability and the MBE. After that, the results was compared with simulation results of the literature. The simulation results did not account the pressure dependent permeability and the developed model results considered that. As the applied field permeability rised 1.17 times, field production rate was increased approximately 15% than the literature results. According to other researches, the permeability of CBM fields can be rise 6 ~ 25 times. For these cases, the production profiles may have significant difference with conventional gas fields.

• Journal of the Korean earth science society
• /
• v.34 no.1
• /
• pp.28-40
• /
• 2013

This study examined the geochemical characteristics, equilibrium temperature and pressure conditions, and oxygen isotopic ratios of mantle xenoliths from the various geological sites of the Korean peninsula. The results are as follows: (1) The ultramafic xenoliths from the Korean peninsula mainly consist of typical high magnesium olivine (MgO : 49.12-50.95 wt.%, Mg value: 90.1-92.2), corresponding to worldwide Cenozoic ultramafic xenoliths in chemical compositions. (2) The pressure-temperature conditions of ultramafic xenoliths in the Korean peninsula are from 854 to $1016^{\circ}C$ and 4.6 to 24.4 kbar. (3) The oxygen isotopic ratios (${\delta}^{18}O$) for olivines in ultramafic xenoliths range from 5.06‰ to 5.51‰, which are relatively uniform oxygen isotopic values and overlapped by the values of N-MORB and upper mantle peridotite (${\delta}^{18}O$: $5.2{\pm}0.2$‰). However, olivines of the ultramafic xenoliths from the Baegdusan and Chejudo have a relatively wide ${\delta}^{18}O$ values ranging from 5.07 to 5.51‰ and 5.07 to 5.45‰, respectively. Based on the results, this study suggests that the high ${\delta}^{18}O$ signature of the Baegdusan xenoliths give a hint that ~5% of the oxygen in typical EM2 sources originally derived from recycled sediments.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.1-7
• /
• 2013

Internal pressure variation analysis and actual holding time test on ISO LNG tank containers which were made in Korea for the first time according to the special notification of ISO tank container manufacture have been conducted during the transport demonstration projects of the tank containers by tractor, train and ship. The internal pressure of the LNG tank container increased rapidly after LNG filling and dropped during moving the container. However, it was stabilized as time passed and followed the liquid-vapor equilibrium graph. In addition, actual holding time of the tank container was more than 20 days which was satisfied with the special notification of LNG tank container manufacture.