• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.833-841
• /
• 2004

This paper treats optimal route assessment system at seaway based on weather forecasting and wave measurement through observation Since early times, captain & officer have been sailing to select the optimum route considering the weather and ship status condition empirically. However, it is rare to find digitalized onboard route support system whereas weather fax or wave and swell chart are utilized for the officer, based on officer's experience. In this paper, optimal route assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimized ETA(estimated time of arrival) and fuel consumption is evaluated for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method. Basically, the weather forecast is assumed to be prepared previously in order to operate this system.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.31-38
• /
• 2011

With today's continuous increase of both seaborne trade and foreign crew boarding ships, it is necessary to study the standardization of Marine English with respect to Aids to Navigation(AtoN) for the safety of ships. After reviewing the organization of the standard council of the equipment and article of AtoN, the standardization of various types of AtoN was not capable of meeting by the only existing council's activities. For on-the-job progress, it was necessary for the subcommittee to be composed by types of AtoN. It is thus desirable to the integrated approach to the combination of the civil, the public, academic circles and research institutes, which harmonized the council's flexibility and professionalism in the composition of the members. Subjects, levels and targets in each course were presented from results of the study on the standardization scheme of Marine English related to AtoN. The ET steps were classified by the difficult degree to which the principles of interpretation and communication were applied. This study contributed to the scheme that was firstly established to solve the problem of the audiovisual English ET due to the lack of the professionalism of the existing marine affairs by presenting the standardization scheme of Marine English prior to the institutional reform related to AtoN.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.108-117
• /
• 2016

In this paper, a portal system compatible with MRV regulation was designed to monitoring, reporting and verifying $CO_2$ emission and fuel consumption data from an international ship. A portal system supports monitoring and reporting task of international shipping companies and calculates national greenhouse gas inventory. EU MRV law, MRV discussions of IMO, responses of international shipping companies to ship energy efficiency and greenhouse gas regulation, and greenhouse gas statistics on international shipping were analyzed to drive portal system requirements. For ship energy efficiency and $CO_2$ emitted monitoring, a data collection module was designed based on on-board equipment, energy efficiency measuring device and navigation report. Data transfer module with easy management and minimized usage to transfer ship data to shore was designed. A portal system was designed to convert the collected data into the standard reporting format, perform monitoring, statical analysis, verification and auto report generation, and support national greenhouse gas inventory.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.227-233
• /
• 2011

Korea coastal area is highly potential dangerous zone of marine accident due to frequent ship's encounters. VTS center can't identify ship's information because of beyond VHF range. It is also difficult of us to efficiently manage vessel traffic beyond VTS control area, so that it can't prevent marine accident. Presently, korean government is conducting maritime traffic safety assessment according to enlargement of harbor & development of new port but do not have the system which provide danger of information depending on maritime traffic environment with real time. So it is necessary to develop evaluation index which can assess sea risk through the evaluation of maritime traffic environment. In this paper, on the basis of vessel navigator's risk consciousness, we carried out survey & statistical analysis vessel navigator's subjective risk depending on the LOA, crossing situation($045^{\circ}$, $090^{\circ}$, $135^{\circ}$), overtaking, head-on situation, encountering vessel's side, within or outside harbor, speed with other vessel(ex. same, fast or slow), speed difference with other vessel and distance with other vessel & propose basic expression to develop maritime traffic safety evaluation model. And by using this model, we can confirm that this proposing expression is suitable for domestic maritime traffic environment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.525-530
• /
• 2013

In this study, the generator engine of training ship M/S "HAE RIM" of Kunsan National University which is being operated for 20 years was used in the experiment. The experiment was carried out under the engine speed of 1200rpm, then the load was varied 30 kW intervals from 0 to 90 kW and the injection timing was varied $2^{\circ}$CA intervals from BTDC $19^{\circ}$ to $23^{\circ}$CA. In the case of advancing fuel injection timing from BTDC $21^{\circ}$CA to $23^{\circ}$CA, specific fuel consumption is decreased by 1.37%, NOx is increased by 11.59 %, soot is decreased by 23.5 % and $SO_2$ is decreased by 2.8 %. Accoring to the analysis of effects of fuel injection timing on combustion & exhaust emissions characteristics on an old marine diesel engine, it is proved that the optimum fuel injection timing is BTDC $23^{\circ}$ which is $2^{\circ}$ faster than that of original injection timing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.467-474
• /
• 2018

The purpose of this study is related to automatic hull-form design for ships operating at two speeds. Research was conducted using a series 60 ($C_B=0.6$) ship as a target, which has the most basic ship hull-form. Hull-form development was pursued from the viewpoint of improving resistance performance. In particular, automatic hull-form design for a ship was performed to improve wave resistance, which is closely related to hull-forms. For this purpose, we developed automatic hull-form design software for ships by combining an optimization technique, resistance prediction technique and hull-form modification technique, appling the software developed to a target ship. A sequential quadratic programming method was used for optimization, and a potential-based panel method was used to predict resistance performance. A Gaussian-type modification function was developed and applied to change the ship hull-form. The software developed was used to design a target ship operating at two different speeds, and the performance of the resulting optimized hull was compared with the results of the original hull. In order to verify the validity of the program developed, experimental results obtained in model tests were compared with calculated values by numerical analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.405-412
• /
• 2019

SOLAS requires that ECDIS be installed on ships of more than 500 gross tonnage engaged in international navigation until the first inspection arriving after July 1, 2018. Several accidents related to the use of ECDIS have occurred with its installation as a new major navigation instrument. The 12 incident reports issued by MAIB, BSU, BEAmer, DMAIB, and DSB were analyzed, and the cause of accident was determined to be related to the operation of the navigator and the ECDIS system. The text was analyzed using the R-program to quantitatively analyze words related to the cause of the accident. We used text mining techniques such as Wordcloud, Wordnetwork and Wordweight to represent the importance of words according to their frequency of derivation. Wordcloud uses the N-gram model as a way of expressing the frequency of used words in cloud form. As a result of the uni-gram analysis of the N-gram model, ECDIS words were obtained the most, and the bi-gram analysis results showed that the word "Safety Contour" was used most frequently. Based on the bi-gram analysis, the causative words are classified into the officer and the ECDIS system, and the related words are represented by Wordnetwork. Finally, the related words with the of icer and the ECDIS system were composed of word corpus, and Wordweight was applied to analyze the change in corpus frequency by year. As a result of analyzing the tendency of corpus variation with the trend line graph, more recently, the corpus of the officer has decreased, and conversely, the corpus of the ECDIS system is gradually increasing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.609-616
• /
• 2019

When the fouling of a vessel occurs, its resistance at sea increases and there is a corresponding increase in fuel consumption. The maintenance cost of the vessel also increases because it is time-consuming to remove the fouling. To solve this problem and minimize environmental contamination of sea-water, there have been recent developments in anti-fouling paints as self-polishing copolymers that not include toxic elements such as tin. When these conventional techniques are applied to vessels, polishing is promoted during the operation whereby friction or vibration with seawater occurs. This leads to enhanced anti-fouling performance. However, when fouling is intensified such as during an anchorage, there is no flow of seawater and polishing is suppressed. This leads to a deterioration of the performance of anti-fouling. To solve these problems, we developed a system that induces vibration in a vessel during anchorage. As such, the deterioration of polishing due to insuf icient flow of seawater is inhibited. The reliability of the ultrasonic antifouling system was evaluated by calculating its repeatability. The removal efficiency of fouling of the proposed system was qualitatively evaluated using test specimens. The test revealed that the value of the coefficient of variation for the reproducibility of the frequency and amplitude was 0.2 % and 4.0 % on average. The degree of fouling of the specimens was the highest at 73.3 g in the No.5 sepcimen. Moreover, efficiency of fouling removal was 93.2 % on average compared to the specimens without the proposed system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1331-1340
• /
• 2020

Object detection in maritime means that the captain detects floating objects that has a risk of colliding with the ship using the computer automatically and as accurately as human eyes. In conventional ships, the presence and distance of objects are determined through radar waves. However, it cannot identify the shape and type. In contrast, with the development of AI, cameras help accurately identify obstacles on the sea route with excellent performance in detecting or recognizing objects. The computer must calculate high-volume pixels to analyze digital images. However, the CPU is specialized for sequential processing; the processing speed is very slow, and smooth service support or security is not guaranteed. Accordingly, this study developed maritime object detection software and implemented it with FPGA to accelerate the processing of large-scale computations. Additionally, the system implementation was improved through embedded boards and FPGA interface, achieving 30 times faster performance than the existing algorithm and a three-times faster entire system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.53-59
• /
• 2021

The marine transport industry generally applies new technologies later than other transport industries, such as airways and railways. Vessels require efficient operation, and their performance and lifespan depend on the level of maintenance and management. Many studies have shown that corrective maintenance (CM) and time-based maintenance (TBM) have restrictions with respect to enabling efficient maintenance of workload and cost to improve operational efficiency. Predictive maintenance (PdM) is an advanced technology that allows monitoring the condition and performance of a target machine to predict its time of failure and helps maintain the key machinery in optimal working conditions at all times. This study presents the development of a marine predictive maintenance (MPdM; maritime predictive maintenance) method based on applying PdM to the marine environment. The MPdM scheme is designed by considering the special environment of the marine transport industry and the extreme marine conditions. Further, results of the study elaborates upon the concept of MPdM and its necessity to advancing marine transportation in the future.