• Title/Summary/Keyword: 안전성능평가

Search Result 1,768, Processing Time 0.027 seconds

Development of Performance Test Procedure for the Excess Flow Valve for Buried Piping for the Domestic LPG Mass Supply System (국내 LPG 집단공급시설 환경에 적합한 매몰배관용 과류차단밸브 성능시험 절차 개발)

  • Jang, Chanyeong;Lee, Ugwiyeon;Lee, Jinhan
    • Journal of the Korean Institute of Gas
    • /
    • v.22 no.6
    • /
    • pp.16-27
    • /
    • 2018
  • Since 2014, the Korean government has begun distributing LPG pipelines and LPG tankers to mountainous or island areas where it is difficult to open urban gas supply chains. When installing LPG supply facilities at village level and county level, it supplied consumers with 10 times higher quasi-low pressure (25 kPa to 100 kPa) than conventional gas supply pressure, increasing the risk of gas accident. Due to the pressure that is 10 times higher than the conventional gas supply pressure, large amounts of gas are released at a faster rate when leaked. In order to secure safety of quasi-low-pressure gas pipes, excess flow valves for quasi-low-pressure gas pipes are not developed and are not supplied in Korea. Therefore, Korea Gas Safety Corporation is investigating the performance standards and products of the excess flow valves in order to localize the excess flow valves.

Cluster Management Scheme for Safety Message Dissemination in a VANET Environment (VANET 환경에서 안전 메시지 배포를 위한 클러스터 관리 기법)

  • Pyun, Do-Woong;Lim, Jongtae;Bok, Kyoung-Soo;Yoo, Jae-Soo
    • The Journal of the Korea Contents Association
    • /
    • v.22 no.5
    • /
    • pp.26-36
    • /
    • 2022
  • Recently, studies have been conducted to cluster vehicles and disseminate safety messages in a VANET environment for driver safety and smoothy traffic. This paper proposes cluster management scheme for safety message dissemination through V2V communication and V2I communication in a VANET environment with high vehicle density and mobility. The proposed scheme reduces packet loss by selecting CH considering reception quality, total data owned by vehicles, moving speed, and connected vehicles, and maintaining cluster head candidates, which are the main agents of message dissemination, considering frequent cluster departures and subscriptions. In addition, the proposed scheme reduces duplicate messages by utilizing clusters by collaborating with a Road side unit(RSU). To prove the excellence of the proposed scheme, various performance evaluations are performed in terms of message packet loss and the number of RSU processing requests. As a result of performance evaluation, the cluster management scheme proposed in this paper shows better performance than the existing scheme.

A Study on the Optimum Navigation Route Safety Assessment System using Real Time Weather Forecasting (실시간 기상 정보를 이용한 최적 항로 안전 평가 시스템의 연구)

  • Choi, Kyong-Soon;Park, Myung-Kyu;Lee, Jin-Ho;Park, Gun-Il
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.13 no.2 s.29
    • /
    • pp.133-140
    • /
    • 2007
  • Since early times, captain have been sailing to select the optimum route considering the weather, ship loading status condition and operational scheduling empirically. However, it is rare to find digitalized onboard route support system whereas weather facsimile or wave and swell chart are utilized for the officer, based on captain's experience. In this paper, optimal route safety assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimizea ETA(estimated time of arrival) and fuel consumption that shipping company and captain are requiring to evaluate for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method. Finally, It is assistance measure for ship's optimum navigation route safety planning & assessment.

  • PDF

Examination of Correlation between the Condition Evaluation Results of Superstructure and the Safety and Load-carrying Capacity of Bridges (노후 교량 유지관리를 위한 상부구조물의 상태평가 결과와 교량의 안전성 및 내하력과의 상관관계 분석)

  • Park, Ju-Hyun;An, Hyojoon;Han, Manseok;Min, Jiyoung;Lee, Jong-Han
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.24 no.4
    • /
    • pp.64-71
    • /
    • 2020
  • In recent years, many infrastructure have been rapidly aging around the world, which grows interest in the maintenance of the infrastructure. Among the social infrastructure, bridge is a very important structure to transport lots of human and various products. The performance evaluation of bridge can be divided into the condition evaluation and safety evaluation, proposed by Korea Infrastructure Safety and Technology Corporation. However, there are no separate criteria for the performance evaluation of three-class bridges. In general, the performance of bridge is dominated by the results of the condition evaluation, which is lower than that of the safety evaluation. Therefore, this study assessed the correlation between the condition evaluation of superstructure and bridge and also between the condition evaluation and the safety and load-carrying capacity of bridge. The results of the study would provide a basic data for the more quantitative and higher relevant performance evaluation of the existing bridges, particularly for three-class bridges.

항구 입출항용 항법 요구성능을 위한 우리나라 R-Mode 항법시스템의 테스트베드 개발 현황

  • 황태현;한영훈;손표웅;김영기;서기열
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2022.11a
    • /
    • pp.209-211
    • /
    • 2022
  • 우리나라 R-Mode(Ranging Mode) 항법시스템은 국제해사기구(IMO, International Maritime Organization)에서 요구하는 항구 입출항용 항법 요구성능(정밀도 10m)을 만족하도록 개발을 진행하고 있다. R-Mode 항법시스템은 위성국 송출을 기반으로 하는 GPS와 달리 지상국 송출을 기반으로 한다. 또한 신호가 세기가 높아서 의도적 전파간섭이 어려우므로 국제해사기구가 요구하는 강인한 PNT(Resilient PNT) 시스템에 적합한 것으로 평가받고 있다. 이러한 요구조건과 기회신호(SoOp, Signal of Opportunity)의 국내 환경에 맞추어 중파(MF, Middle Frequency) 및 초단파(VHF, Very High Frequency)를 이용하는 항법시스템을 개발하고 있다. 해양수산부의 지원으로 2020년에 착수하여 4국의 중파 R-Mode 송신국과 3국의 초단파 VDES R-Mode 송신국 구축을 진행하고 있다. 항법 성능을 확보하기 위하여 R-Mode 보정시스템과 R-Mode 감시시스템을 구축하였다. 해양에서 R-Mode 항법시스템의 성능을 검증하기 위하여 중파 R-Mode 수신기, VDES R-Mode 수신기 및 이를 포함하는 통합항법수신기를 함께 개발하고 있다. 항법 송신기 및 수신기의 성능 검증을 위한 테스트베드는 기존의 지상파 항법(eLoran) 서비스 영역, 중파 R-Mode 서비스 영역 및 주요 항만 등을 고려하여 충청남도 서산시 대산항 지역으로 선정하였다. 보정국 및 감시국을 포함하는 테스트베드 기지국은 대산항에 설치하여 운영을 시작하였다. 테스트베드 실해역 시험을 통한 성능 검증은 2023년 상반기에 진행될 계획이다.

  • PDF

Analytical Study of Fire Resistance Performance of Plant Facilities using Ansys (Ansys를 활용한 플랜트 시설물 내화성능에 대한 해석적 연구)

  • Doo Chan Choi;Min Hyeok Yang;Su Min Oh;So Jin Yang
    • Journal of the Society of Disaster Information
    • /
    • v.19 no.4
    • /
    • pp.958-967
    • /
    • 2023
  • Purpose: This study aims to analyze the fire resistance performance applied to plant facilities with high fire risk in Korea, secure suitable fire resistance performance, and ensure the fire safety of plant facilities. Method: Using the finite element analysis program Ansys, thermal transfer analysis and structural analysis were performed with fire load and fireproof coating as variables, and the fire resistance performance of plant facilities was analyzed based on the analysis results. Result: The fireproof coating applied to domestic plant facilities failed to secure fire resistance performance when the fire load of hydrocarbon fire presented in UL 1709 was applied, and it was confirmed that the deformation of steel after the fire was also significant. Conclusion: The current fire resistance performance applied to plant facilities in Korea cannot secure fire resistance performance in sudden fire growth and large fire loads like petrochemical plants, and it is necessary to secure fire safety by evaluating suitable fire resistance performance through performance evaluation of plant facilities.

Development of Stability Index for Vessel Operators Support System (선박 운항자 지원 시스템용 선박 복원성능 지수 개발)

  • IM, Nam-Kyun;HWANG, SooJin;CHOE, Hun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.24 no.1
    • /
    • pp.1-9
    • /
    • 2018
  • All ships should ensure stability in accordance with IMO regulations. However, GM is only used to determine ship stability because it takes a lot of time to validate all regulations. This is a problem given that the safety of vessels cannot be guaranteed, potentially leading to accidents. There is a need for a more intuitive and comprehensive method of confirming the stability of ships. This study developed a stability index that expresses ship stability in one value. An index equation is defined based on the 6 stability criteria for ships prescribed by IMO and the result of calculating the ship stability of a model ship. A stability index has been derived for each loading condition by applying the index equation to the same ship. It can clearly be seen that this stability index appropriately explains the criteria. In other words, it is possible to assess ship stability with one value and confirm whether the ship stability satisfies IMO regulations. This index will help masters and officers more easily and accurately check ship stability.

Computational Study for the Performance of Fludic Device during LBLOCA using TRAC-M (최적계산코드를 이용한 대형 냉각재상실사고시 유량조절기 성능평가에 관한 연구)

  • Chon Woochong;Lee Jae Hoon;Lee Sang Jong
    • Journal of Energy Engineering
    • /
    • v.14 no.1
    • /
    • pp.54-61
    • /
    • 2005
  • The APR1400 is an Advanced Pressurized Water Reactor with 3983 MWt power, 2×4 loops, and direct vessel injection system. The Fluidic Device (FD) is adopted to regulate the safety injection flow rate in a Safety Injection Tank (SIT) of APR1400. The performance of a newly designed fluidic Device is evaluated by analyzing a Large Break Loss-of-Coolant Accident (LBLOCA) using TRAC-M/F90, version 3.782. The analysis results show that the TRAC-M code reasonably predicts the important phenomena of blowdown, refill and reflood phases of LBLOCA. The sensitivity studies about gas/water volume changes in a SIT and K factor changes in a SI system were also done to understand the important phenomena with a Fluidic Device in APR1400.

Structural Performances of an Axially-loaded Node in Single Layered Free Form Space Structures (단층 프리폼 대공간 구조물의 노드에 대한 축하중 구조성능 평가)

  • Lee, Kyoung-Ju;Oh, Jin-Tak;Hwang, Kyung-Ju;Ju, Young-Kyu;Kim, Sang-Dae
    • Journal of Korean Society of Steel Construction
    • /
    • v.24 no.1
    • /
    • pp.59-71
    • /
    • 2012
  • Results of the analysis of the structural behavior of axially loaded nodes in freeform structure were not fully understood due to certain difficulties, including the application of various welding and bolting types. In this study, a node of single layered freeform structure was tested to determine its structural behavior when subjected to axial loads. The tests were classified into node ball tests to evaluate the center of the node subjected to cyclic and monotonic loading. The node part tests were also conducted to evaluate the whole node subjected to monotonic loading. The test showed that the node ball is safe with the tensile force, but the node ball needs to increase its strength with the node loaded compressive force due to the additional bending moment of the node ball's asymmetric form.

DEVELOPMENT OF METAL FOAM FILTER BY USING CUSTOMIZED DESIGN PROGRAM (설계전용프로그램을 이용한 금속폼 필터 개발)

  • Lee, J.M.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2010.05a
    • /
    • pp.446-447
    • /
    • 2010
  • 최근 개발된 니켈 초합금 금속폼은 기존의 매연저감장치 신소재로 여겨지고 있다. 금속폼은 세가지 두드러진 특징을 갖고 있다. 첫째, 금속폼은 큰 기공의 다공성 매질로써 매연을 포집하여 축적할 수 있는 용량이 기존 필터에 비해 상대적으로 크며 그로인하여 재생 시 연소 안전성이 두드러진다. 둘째, 복잡하고 굴곡있는 기공 구조와 큰 비표면적은 물질전달 특성을 향상시켜 촉매 적용 시 촉매의 전환성능을 향상시키고 그로 인하여 귀금속 촉매량을 줄일 수 있는 장점이 있다. 셋째, 금속폼은 다양한 기공크기를 가지며, 다양한 조합의 금속폼을 개발할 수 있어 요구 성능에 따른 최적의 필터 설계를 가능케 한다. 이번연구에서는, 금속폼의 필터 성능을 다양한 실험을 통하여 측정 평가하며, 이런 이해를 기반으로 필터로 제작하여 엔진실험벤치에서 그 성능을 검증하였다. 필터의 성능은 수트 포집효율과 그에 따른 필터의 압력강하와 촉매 활성 능력으로 평가되었다. 이러한 실험과 병행하여 금속폼에서의 수트 포집과정을 모델링하고 이를 상용 프로그램인 CFD-ACE+에 추가하여 설계전용 프로그램을 개발하였으며, 엔진실험결과와 비교 검증하였다. 본 논문에서는 금속폼의 높은 매연축적용량과 향상된 물질전달 특성이 어떻게 필터의 귀금속 촉매와 체적을 줄일 수 있는지 제시하고 있다.

  • PDF