• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.217-220
• /
• 2020

Conventionally, when a zirconia fixed dental restoration is planned, the interim restoration is made manually and the final restoration is fabricated by the silicone impression taking at the prosthodontic stage. This conventional workflow does not provide direct relation between interim and final restorations. Moreover, the predictability of the final restoration could be low. Nowadays, the CAD/CAM based restoration fabrication and related digital techniques are developed and being applied in dentistry in multiple ways. This case report introduces a digital workflow for fabricating an optimal gingival adaptation and predictability of monolithic zirconia restoration by using CAD/CAM interim restoration, intra oral scan, and image superimposition technique in a case that required tooth extraction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.859-863
• /
• 2008

축산폐수, 침출수 등의 고농도 폐수를 생물학적으로 처리할 경우 최종 방류수는 강한 색도를 띠며 고분자량의 유기물질을 다량 함유한다. 이는 생물학적으로 분해하기 어려운 유기성 복합체와 생화학적 반응에 의한 중간생성물로 색도를 띠는 천연유기물질(NOM)을 포함한다. 생물학적 처리수의 색도는 심미적인 불안감, 방류수역의 수질오염 및 공중보건상의 잠재적 위해성을 갖는다. 또한, 수자원 이용측면에서 정수처리공정에서의 약품투입량 증가와 특히, 소독부산물 생성이라는 잠재적 문제점이 뒤따른다. 따라서 이러한 문제점을 해소하기 위한 생물학적 2차 처리수의 후속처리가 요구되며, 실제로 난분해성 유기물과 색도를 제거하기 위한 흡착, 막 분리, 고급산화(AOP) 및 화학적 응집 등의 물리-화학적 공정에 대한 연구가 수행되어왔다. 특히, 화학적 응집은 무기응집제 또는 고분자중합체(Polymer)를 이용하여 콜로이드성 입자와 색도를 띠는 난분해성 유기물을 전기적 불안정화를 유도함으로서 흡착 및 응집과정을 통해 제거하는 공정으로 많은 연구자들에 의해 연구되어왔다. 그러나 난분해성 유기물과 색도제거는 대상원수의 성상과 화학적 특성 등에 따라 각각의 제거효율과 최적 운전조건이 상이하게 나타난다. 화학적 응집공정은 비교적 높은 제거효율을 보이지만, 운전 및 유지관리의 기술적 어려움, 경제적 비효율성 등으로 인하여 적용에 어려움을 겪고 있는 실정이다. 본 논문에서는 생물학적 혐기-호기성 공정에서 방류되는 축산폐수의 2차 처리수를 대상으로 화학적 응집에 의한 색도 및 난분해성 유기물의 제거거동을 고찰하였다. 대상 처리수의 $TCOD_{Cr}$ 농도는 평균 410 mg/L인 반면, $BOD_5$는 7-15 mg/L 범위로 난분해성 유기물을 다량 함유하고 있음을 알 수 있었다. 이에 황산알루미늄(Aluminium sulfate; $Al_2(SO_4){\cdot}14H_2O$)과 염화철(ferric chloride)의 무기응집제를 이용하여 자 테스트(jar test)를 수행한 결과, 동일한 응집제 주입량에서 염화철의 유기물 제거 효율이 높은 것으로 나타났다. 황산알루미늄과 염화철의 경우 각각의 응집제 주입율 5.85mM에서 89%, 7.03mM에서 97.5%의 최대 유기물 제거효율을 보여주었으며, 이 때 최종 pH는 4.0-5.6 범위이었다. 한편, 대상 원수 내의 콜로이드성 입자 또는 용존성 유기물의 작용기(functional group)는 일반적으로 음으로 하전 되어 있어 응집에 의해 잘 제거되지 않는 특성을 가지고 있다. 따라서 과량의 응집제를 주입하여 다가의 양이온성 금속염을 흡착시켜 전기적으로 중화시키고, 생성된 침전성 수화물 내에 포획 또는 여과시켜 제거하게 된다. 이 때, 금속염 수화종의 전하밀도가 응집효율에 영향을 주는 것으로 알려져 있는데, 다가의 양이온은 전기적 이중층(Double layer) 압축에 의한 불안정화를 향상시킬 수 있기 때문에다. 또한, 2가 금속염은 색도유발물질과 흡착하여 humate 또는 fulvate 등의 착화합물(complex)을 형성시켜 응집효율을 향상시킬 수 있다. 따라서 본 연구에서는 생물학적 2차 처리수의 화학적 응집처리에 있어서 알루미늄염 등의 다가이온 첨가가 응집에 미치는 영향을 관찰하고, 후속되는 플록형성 및 침전공정에 의한 제거효율을 비교, 평가함으로써 2차 처리수로부터 난분해성 유기물과 색도를 보다 효과적이고 경제적으로 제거할 수 있는 최적인자를 도출하고자 하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.11-20
• /
• 2010

In situation that carbon dioxide emissions are being increased as urbanization, urban green space is being promoted as an alternative to find solution for these problems. In urban areas, trees have the ability to reduce carbon dioxide as well as to be aesthetic effect. In this study, we proposed the methodology which uses only LIDAR data in order to extract these trees information effectively. To improve the operational efficiency according to the extraction of trees, the proposed methodology was carried out using multiple data processing such as point, polygon and raster. Because the existing NDSM(Normalized Digital Surface Model) contains both the building and tree information, it has the problems of high complexity of data processing for extracting trees. Therefore, in order to improve these problems, this study used modified NDSM which was removed estimate regions of building. To evaluate the performance of the proposed methodology, three different zones which coexist buildings and trees within urban areas were selected and the accuracy of extracted trees was compared with the image taken by digital camera.

• Journal of The Korean Association For Science Education
• /
• v.34 no.2
• /
• pp.175-186
• /
• 2014

This study investigated the influences of pair activity on characteristics of science imaginary pictures drawn by elementary school students and their perceptions of science imaginary drawing. To do this, fourth graders (N=123) from one of the elementary schools were selected and assigned to individual science imaginary drawing (n=61) and paired science imaginary drawing (n=62) groups. The students of each group were administered the questionnaires. The analyses of the results indicated that pair science imaginary drawing was useful in some cognitive aspects (e.g., the understanding of science imaginary drawing, the diversification of topics and times, the generation of scientific ideas, and the elaboration of the pictures) and motivational aspects (e.g., the inducement of interest and intimacy about science, interest about science imaginary drawing, and sociability with friends). However, there were some limitations in positively changing the perceptions of some cognitive aspects (e.g., the acquirement of new scientific knowledge, the remembrance of scientific knowledge, the improvement of the ability to construct scientific logics, and the improvement of scientific imagination) and aesthetic aspects (e.g., the improvement of the abilities to express themes in drawing, paint the picture, and complete the works of art). In addition, the difficulties in imagining, selecting the subject, and expressing could not be overcome; a few disadvantages in the lack of discussion skills were also pointed out.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.123-134
• /
• 2009

Since 1970s, urethane waterproofing method is broadly used in rooftops, underground spaces, and sports stadium for its outstanding ultraviolet blockage, watertightness, and elasticity. However, development of slippage-resistance and endurance, improvement of function considering convenience and visually pleasing of users, urethane waterproofing method is necessary, since rooftops and underground spaces have slippage and external force risks. Therefore, many improved waterproofing methods are being developed and, recently, embo-thane waterproofing method, which applies embo-spray coating system, has been developed. This paper explains exposure, nonexposure, and floor-material of embo-thane waterproofing method, and then perform experimental study for comparison with urethane waterproofing method about tensile strength, coefficient of expansion, performance of bond, anti-abrasion, and slippage-resistance. In addition, the performance index was presented for the superiority of embo-thane waterproofing method compared to urethane by setting up evaluation criteria considering not only physical performance but also design side of embo-thane waterproofing method, and Value Analysis applying AHP. Also for an assessment considering uncertain result, Monte Carlo Simulation Method was used to operate reliability analysis through statistic approach method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.35-44
• /
• 2017

This study intends to analyze the structural relationships among the servicescape of theme park, the affective image and the place dependence of visitors, one of the most important factors of place attachment. For this purpose, this study selects Lotte World in Seoul as a study site and conducts a questionnaire survey focused on visitors who visited the site previously. The results of an exploratory factor analysis, confirmatory factor analysis and structural equation method show that esthetics and amenity factors among servicescape of theme park affect the attractiveness and comfortableness of the affective image of visitors positively, and two factors of visitors' affective image also affect the their place dependence positively. Tourism planners or landscape designers can consider these useful servicescape elements of theme park as important planning and managing factors in order to improve the images of theme parks and the level of place attachment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.218-224
• /
• 2018

Macroglossia is an obstacle in regard to general prosthodontic restoration. Not only is it difficult to obtain support and stability from dentures manufactured from normal protocol, obtaining efficacy from basic mastication is also difficult. In such cases, realizing harmony between the occlusion and surrounding muscle structures may be important with regard to manufacture of stable full dentures, and it is necessary to form the appropriate polished surface for this case. The neutral zone is defined as the potential area resulting from the neuromuscular function that results in equilibrium between the outward force exerted by the tongue and the inward force exerted by the lips and cheeks. The artificial teeth of the full denture lies in this area, and if the polished zone follows the anatomic form of the dynamic muscles, the movement of the muscles simply acts as an element of stabilizing the dentures improving the esthetics through facial support.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.329-336
• /
• 2009

In the case of congenital malformation, acquired trauma, or maxillectomy by neoplasm, the defect in maxilla is combined with nasal cavity, maxillary sinus and oral cavity. This results in abnormal function in pronunciation, mastication, and swallowing. In this situation, the purposes of prosthodontics are also applied. The purposes of obturator for acquired maxillary deficiency patients are restoring pronunciation, mastication, and swallowing, and make patients comfortable and esthetic satisfaction. Reducing weight of the obturator makes edentulous ridge heathy and functional. It also improves patients' comfort. Hollow obturator also reduces unnecessary stress because improves physiologic function, as it weights less than 6.55-33.06% compare to usual one. This case presents the double-processing method for maxillary obturator in the patient treated hemi-maxillectomy due to malignancy neoplasm. We report this case because the patient acquired functional and esthetic satisfaction from double-processing obturator.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.3
• /
• pp.173-187
• /
• 2021

The purpose of this research was to develop instructions for making upcycled clothing accessories related to the 'clothing management and recycling' unit of middle school home economics applying the design thinking technique. Teaching and learning process plans were developed according to the ADDIE model which includes the following process: analysis, design, development, implementation, and evaluation. The design thinking process includes understanding the related knowledge, sympathizing, problem identification(sharing perspectives) and idea development, making prototypes, testing, and making the actual product. Thirteen home economics teachers served as critics. Student feedbacks were collected to evaluate whether the course objectives were attained after the implementation. As a result, teaching and learning process plans, course materials, and evaluation rubrics for ten class sessions were developed. Student feedbacks confirmed the attainment of following five course objectives: improvement of ethical responsibilities through the exploration of various clothing recycling techniques, practice of creative and eco-friendly clothing culture, acquisition of the skills to use sewing tools safely, improvement of abilities to think, sympathize, and communicate, and exploration of aesthetic activities and fashion careers.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.289-300
• /
• 2007

Recently, the number of People who want to study by online has been gradually increased. In addition, people's desire is increasing that represents their special knowledge and personality with new paradigm of UCC(User Created Contents). Most of the educational web-sites offer currently boring and unified educational contents without interesting objects. Therefore I want to solve these problems of existing online educational web-sites and I strongly propose the method of design to make the place educational and useful that everyone can enjoy and manifest the user's dispositions. On this study, it's possible to make pleasant environment and improve educational effects on cyber space by designing it in accordance with the individual tastes which have various design elements, beauties and facilities by the customized design method. As a result, this study proposes the model of online educational web-site having various interfaces and focusing on the customized design.