• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.350-364
• /
• 2008

Single frequency network (SFN) design based on the Advanced Television Systems Committee (ATSC) specification, a terrestrial digital television (DTV) system, normally causes a interference problem, among signals from multiple transmitters or repeaters. To solve this, the ATSC recommended practice (RP) introduces a transmitter identification (TxID) signal embedded in a signal from each transmitter or repeater. A TxID signal analyzer is then used to detect the TxID signal, and following the analysis results, a SFN design can be adjusted. This paper discusses the generation and usages of Kasami sequence, is used the TxID signal. The configuration of the TxID signal analyzer to efficiently detect TxID signal is proposed and the results of theoretical performance analysis are provided. Moreover, computer simulation and laboratory test results are provided to evaluate the performance of TxID signal analyzer and the theoretical performance analysis.

• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.365-379
• /
• 2008

In this paper we consider technological requirements of the on-channel repeater to broadcast the terrestrial digital multimedia broadcasting (T-DMB) signals using single frequency networks (SFN) and propose the configuration and implementation method of the equalization on-channel repeater (OCR) that meet such requirements. The proposed equalization OCR not only has short time delay, but shows high output power and good quality of output signal by removing a feedback signal due to incomplete antenna isolation and multipath signal existing between the main transmitter and the OCR. In addition, computer simulations and laboratory tests results are provided to figure out performance of the proposed equalization OCR.

• Journal of Food Hygiene and Safety
• /
• v.24 no.2
• /
• pp.148-153
• /
• 2009

In this study, we have developed a fluorescence chromatographic assay for the quantification of total cholesterol in serum, which is a well-known risk predictor for cardiovascular diseases. The new assay system consists of a chromatographic strip in a cartridge, enzyme buffer containing cholesterol esterase, cholesterol oxidase, horseradish peroxidase, and color developer AEC, and a laser fluorescence scanner. The correlation coefficient (r) between cholesterol concentration and relative fluorescence units was 0.968 in the new assay, showing a reliable linearity through the tested range of cholesterol. Recovery test and comparability with a Hitachi 747 instrument showed 106.5-94% and r = 0.939 (p<0.001), respectively. The new assay system for cholesterol was developed as a pre-POCT platform conducted in clinics since it is fast (8 min) and uses a small volume of sample ($5\;{\mu}l$), and it may be applied for on-site diagnostics to replace expensive automated biochemical analyzer.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.43-51
• /
• 2018

As the inventory of aged apartments is expected to increase explosively, the importance of maintenance to improve the durability of concrete facilities is increasing. Concrete compressive strength is a representative index of durability of concrete facilities, and is an important item in the precision safety diagnosis for facility maintenance. However, existing methods for measuring the concrete compressive strength and determining the maintenance of concrete facilities have limitations such as facility safety problem, high cost problem, and low reliability problem. In this study, we proposed a model that can predict the concrete compressive strength through images by using deep convolution neural network technique. Learning, validation and testing were conducted by applying the concrete compressive strength dataset constructed through the concrete specimen which is produced in the laboratory environment. As a result, it was found that the concrete compressive strength could be learned by using the images, and the validity of the proposed model was confirmed.

• The KIPS Transactions:PartC
• /
• v.18C no.6
• /
• pp.423-432
• /
• 2011

Recently, OpenFlow has been paid attention to as a fundamental technology which provides a function of virtualization and programmability in network. In Korea, deployment of OpenFlow networks in campuses and the interconnection between them through tunneling in layer 3 has been performed. However, the performance of the interconnected networks is decreased due to delay in IP layer. In this paper, we design and deploy nation-wide, not local, OpenFlow networks in a pure layer 2 environment over KREONET. After that, we do end-to-end Round-trip Time measurements and TCP/UDP performance tests in OpenFlow and normal networks, and do comparison and analysis on the test results. The results show that the nation-wide OpenFlow networks provide equal performance to normal networks except for the initial packet loss for UDP streaming. In regards to the performance decrease due to early UDP packet loss, we can mitigate it by implementing exceptional procedures in a controller which deal with the same continuous "Packet_in" events.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.813-815
• /
• 2016

This paper implements a device control system based on the brain wave data. Brain-Computer Interface (BCI) technology can pass directly to the system without going through the operation of the language or body. By controlling the device to detect brain waves in real time according to the change of status it helps to ease life for a variety of services, such as disabled people with limited mobility or students, people who need multi-tasking. In addition, it is possible to develop an application service such as the home device control system. A device control system implemented in the paper based on the data collected from the EEG Headset associated to control the power of the smart phone and audio. Control the power ON / OFF operation by the Attention, and support service functions to control the audio by the Meditation and Eye blink. It was confirmed that the device control using the brain wave data to be operated through a laboratory test successfully.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.595-602
• /
• 2021

Marine accidents are mostly caused by medium and small ships, and are continuously increasing. In this paper, we propose an architecture of the speech synthesis based automatic safety navigation support service providing system for small ships that equiped onboard systems compared with vessels. The main purpose of the system is to prevent marine accidents by providing synthesized voice safety messages to nearby ships. The safety navigation support service is operated by connecting GPS and AIS to synthesize voice safety messages, automatically broadcast through VHF. Therefore, we developed a data processing module, a staged risk analysis module, a voice synthesis safety message generation module, and a VHF broadcasting equipment control module, which are components of the system. In addition, we conducted laboratory-level and sea-trial demonstration tests using the developed the system, which verified usefulness of the proposed service.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.221-227
• /
• 2012

In Korea, ocean dumping has been widely used as the ultimate disposal of sewage sludge. However, ocean dumping of food wasted and sewage sludge from 2013 is expected to legally restricted as London convention on marine pollution prevention has been effective in 2009. This research aims to examine the effect of HEAS in treating the environmental pollution load caused by organic high concentrated sludge. Thus, onsite laboratory scale treatability test using HEAS was adopted to treat the high concentrated organic sludge from sewage and industrial wastewater treatment plant. The research results showed that the HEAS is useful to reduce the environmental pollution caused by organic high concentrated sludge. Specific results are as follows. 1. The organic removal after the sludge digestion using the high efficiency aeration system was 55.2-85.8%. Although these results were lower than those from the general sewage treatment, the high efficiency aeration system could be evaluated as efficient, considering the object sludge contained the industrial waster water. 2. The average removal efficiency was about 25.2%. 3. It was revealed that sludge digestion by the high efficiency aeration system could effectively contribute to the sludge treatment cost. Especially, the high efficiency aeration system is more applicable to the onsite treatment of small sewage and wastewater treatment plant that contains high solid content sludge, industrial wastewater sludge, high fixed solid sludge.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.71-71
• /
• 2017

농용트랙터의 운전자는 작업, 주행으로 인한 유해한 저주파 진동에 장시간 노출된다. 이에 따라 운전자에게 전달되는 노면 진동을 감소시켜주기 위한 전방차축 현가장치의 역할이 커지고 있다. 트랙터의 전방차축 현가장치는 주로 유압식으로 설계되어 있으며 이를 구성하는 유압요소 선정이 현가장치의 성능에 중요한 영향을 미친다. 하지만, 실제와 유사한 조건에서 트랙터 차체 무게만큼 큰 부하를 제공하여 유압회로의 성능을 실험하는 것은 비용과 시간 측면에서 비효율적이다. 본 연구에서는 이를 대체하기 위하여 개별 유압요소의 성능을 테스트 할 수 있는 현가장치 유압회로 요인 시험기를 설계제작 하였다. 이를 이용하여 개별 부품의 성능곡선을 센서를 이용 측정하였고 얻은 특성값을, 구성한 유압 시뮬레이션 모델에 반영하여 실제조건의 유압특성을 얻을 수 있는 유효한 시뮬레이션 모델 개발에 활용하였다. 또한, 실험실 환경에서 유압식 현가장치를 간소화 시킨 형태로 유압회로의 성능을 예비시험해 볼 수 있도록 다양한 센서를 장착 데이터를 취득할 수 있도록 하였다. 개발한 요인 시험기는 하부에 설치된 가진 실린더를 이용하여 상부에 설치된 현가장치 실린더의 스트로크 변위와 속도에 따른 힘을 측정할 수 있도록 구성하였다. 이를 위해 현가장치 실린더의 헤드부와 로드부에 각각 압력센서를 설치하였으며 헤드부, 로드부의 압력 차이와 로드셀을 이용해 측정한 가진 실린더의 힘의 관계를 확인하였다. 상부의 현가 실린더 장치는 복동 형태로 제작되어 헤드부, 로드부 양쪽 방향으로 유량이 흐를 수 있도록 설계되었다. 이를 이용해 헤드부와 로드부 사이에 어큐뮬레이터, 가변 오리피스, 릴리프 밸브 등으로 유압회로를 구성하였으며 어큐뮬레이터 용량에 따른 힘의 변화, 가변 오리피스의 개도량에 따라서 전달되는 힘의 크기 등을 측정하였다. 하부의 가진 실린더는 사인파, 삼각파, 계단 입력, DC 레벨 등의 신호를 발생시킬 수 있도록 제작되었다. 신호의 주파수는 0~4Hz, 범위에서 사용자가 조절할 수 있도록 설정되었으며 계단응답 성능 측정 시험을 평가한 결과 정상상태오차는 0.470mm~0.536mm, 입상시간은 0.194초~0.202초, 정착시간은 0.230초~0.421초로 나타났다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.282-289
• /
• 2020

Purpose: The aim of this in vitro study was to evaluate the accuracy of three different intraoral scanners (IOSs) on digital impressions of different types of endocrown cavity preparations. Materials and methods: Two human mandibular molar teeth were prepared with different endocrown abutment designs: one with a buccal wall (Class 2) and the other without a buccal wall (Class 3). Both cavity designs were scanned using a reference desktop scanner (E3) and three different intraoral scanners: Trios3 (TRI group), Cerec Omnicam (CER group), and i500 (I5 group). The obtained Standard Tessellation Language (.stl) datasets were exported to metrology software. The precision was evaluated based on deviations among repeated scan models recorded by each IOS. The trueness was evaluated based on deviations between the reference data and repeated scans. For detecting interaction, data were statistically analyzed using a univariate analysis of variance (ANOVA) and for analyzing the comparison of the test groups data were analyzed by one-way ANOVA and post-hoc Tukey test at the significance level of .05. Results: The deviation values for both cavity designs in the I5 group were significantly lower than those in the other IOS groups in terms of trueness. For both cavity designs, the TRI group exhibited better precision than the other IOS groups. Conclusion: Different technologies of IOS device's and different endocrown prepration designs affected the accuracy of the digital scans.