• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.625-628
• /
• 2006

It is known that cement production not only consumes large amount of energy but also contributes substantially to the green house gas emission. Therefore, there is a demand to develope a new technology to produce energy efficient and environmental conscious cements. The most recent, wood wool ceramic board is being applied in various building material field, for example thermal insulating and acoustic absorption material. This paper focused on improvement of alumino-silicate binder's physical properties for wood wool ceramic board. As the result of this experiment, what we could obtain best fitted alumino-silicate binder's properties such as initial setting time, flow and compressive strength of 3 days aged, was 58min, 110% and 66.0Mpa. This result can be applicable to commercial wood wool ceramic board.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권3호
• /
• pp.284-288
• /
• 1997

FT-IR and FT-Raman spectra were measured for 15Li$_{2}$O.3Al$_{2}$O$_{3}$.78SiO$_{2}$. 4K$_{2}$O glass system after UV irradiations. Optimum UV irradiation time of Li$_{2}$O.SiO$_{2}$ crystalline phase was 60 seconds and crystalline phase of Li$_{2}$O.SiO$_{2}$ was leached out on 5% HF. 977 cm$^{1}$ band of FT-Raman spectra can be attributed to two-non bridging oxygen in unit cell for 1 hour and optimum crystallization was confirmed for 3 hrs, 630.deg. C.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.30-30
• /
• 2010

In order to prepare a epoxy/multilayered silicate nanocomposite, various mixing processes were tried and it was found that the silicate could not be fully exfoliated in the epoxy matrix through various mechanical mixing process. In this study, a new AC electric application method was developed to prepare epoxy/multilayered silicate nanocomposite. The exfoliation of the silicate was confirmed by XRD (X-Ray Diffraction) and TEM observation.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.137-140
• /
• 2005

Exfoliated nanocomposites of polypropylene/layered silicate were prepared by a melt compounding process using maleic anhydride modified polypropylene (PP-g-MAH) and organoclay. It was found that polypropylene/layered silicate nanocomposites exhibited remarkable reinforcement compared with the pure polypropylene or conventional composite filled with agglomerated organoclay. The polypropylene /layered silicate nanocomposites showed stronger and earlier shear thinning behaviors and outstanding strain hardening behavior than pure polypropylene or other conventional composites in shear and uniaxial elongational flows, respectively. We simulated rheological modeling for the pure polymer matrix and polypropylene/layered silicate nanocomposite in shear and elongational flows using K-BKZ integral constitutive equation. The two types of K-BKZequations have been examined to describe experimental results of shear and uniaxial elongational viscosities of pure polypropylene and polypropylene/layered silicate nanocomposite.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1694-1699
• /
• 2013

Frequency accelerated partial discharge resistance (PDR) aging of epoxy/layered silicate nanocomposite with 1.5wt % additions of layered silicate was investigated in comparison with that of epoxy without layered silicate in terms of PD(partial discharge) erosion depth. It was found that the change in the erosion depth is far smaller in specimens with layered silicate than those without layered silicate nano particles. Frequency acceleration can be done from 60Hz to 1000Hz. But the depth of erosion is less proportional to frequency. Acceleration factor is almost 2 times between 500Hz and 1000Hz, but it is much less than about 8.3 times between 60Hz and 500Hz. This superior PD resistance is caused by the presence of nanofillers, anano-effect due to closely packed nanofillers, and strong chemical bonds at layered silicate nanofillers /resin interfaces.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.71-78
• /
• 2005

The purpose of this study is to suggest a hyperfine maskless writing technique by using the nanoindentation and HF wet etching technique. Indents were made on the surface of Pyrex7740 glass by the hyperfine indentation process with a Berkovich diamond indenter, and they were etched in $50\;wr\%$ HF solution. After etching process, convex structure was obtained due to the deformation-induced hillock phenomena. In this study, effects of indentation process parameters (etching time, normal load, loading .ate, hold-time at the maximum load) on the morphologies of the indented surfaces after isotopic etching were investigated from an angle of deformation energies. Finally, sample characters were written to show the possibility of the application.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2002년도 춘계 학술발표회 논문집
• /
• pp.125-128
• /
• 2002

• 한국안전학회지
• /
• 제21권1호
• /
• pp.79-85
• /
• 2006

Olefinic compatibilized blend(R-PP/R-PE)/layered silicate composites have been prepared by melt intercalation technique directed from $Na^{+}$ montmorillonite(MMT) or organophilic montmorillonites while using magnesium hydroxide as flame retardant. Morphology and flammability properties were characterized by X-ray diffraction(XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM), thermogravimetry analysis(TGA), limiting oxygen index(LOI), UL94 test. It is found that the compatibilized blend/layered silicate(Cloisite 20A) nanocomposites have a mixed immiscible-intercalated structure and there is better intercalation when a compatibilizer is combined with the polymer and layered silicate to be melt blended. A very large increase in the LOI value was observed with hybrid filler addition and further enhancement in thermal stability and compatibility of blend was obtained for the compatibilized blend containing small amount of layered silicate.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.147-148
• /
• 2014

1990년에 Sony사는 탄소 음극과 리튬 코발트 산화물($LiCoO_2$) 양극을 함유하는 최초의 상용 리튬이온 전지를 발표하였다. 이후, 전지 성분을 변형하여 안전성과 전기화학적 용량을 향상시키고 비용을 줄이기 위한 연구가 수행되었다. 이러한 관심의 대부분은 양극 용량이 전지 용량을 한정하고 전지 비용의 40%까지 양극 원재료 비용에서부터 비롯되었기 때문에 양극 대체기술 개발에 집중되었다. 리튬이온 전지는 현재 휴대용 전자 기기 시장을 좌우하고 있다. 또한 온실가스 배출의 감소를 요구하는 환경보호에 대한 관심에 대한 새로운 시장 기회가 조성되었다. 1990년대 이후, 비독성의 저가 재료를 사용하여 환경 영향과 비용을 최소화 하려는 노력을 경주하면서 에너지 밀도를 극대화하고, 리튬 삽입과 추출의 유용 범위를 확대하여 용량을 극대화하고 있다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.49-49
• /
• 2002

A strategy for the synthesis of more stable and large periodic mesoporous organo-silica materials has been developed for the 2D hexagonal mesoporous organosilica by the core-shell approach using nonionic PEO-PLGA-PEO triblock copolymer templates. The BET surface area of the solvent-extracted hexagonal mesoporous organosilica is estimated to be 1,016 ㎡/g and the pore volume, pore diameter, and wall thickness are 1.447 ㎤/g, 65 Å, and 43 Å, respectively. More hydrophobic PLGA block than the PPO block used for templates of mesoporous silica proves to be quite effective in confining the organosilicates within the PEO phase. Reaction temperature and acid concentration of an initial solution as well as the chemical nature of the bloc k copolymer templates also demonstrate to be important experimental parameters for ordered organosilica mesophase. Moreover, the mesoporous organosilicas prepared with the PEO-PLGA-PEO block templates maintain their structural integrity for up to 25 days in boiling water at 100℃. The mesoporous materials with large pores and high hydrothermal stability prepared in this study has a potential for many applications.