• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.287-292
• /
• 2003

Even though MCG has many advantages over ECG, MCG signa)s are easily corrupted by external magnetic noises Since multi-channel MCG signals are recorded simultaneously at many spatial positions, it is effective to apply spatial fitters as well as the conventional temporal filters to remove external magnetic noises. The spatial filters can be designed by utilizing the fact that the noise signals caused by external noise sources are more spatially correlated than the original MCG signals. In this paper, we introduce a spatial filtering method for the noise reduction in MCG based on the principal component analysis. Healthy volunteer study results obtained with a 61-channel MCG system are presented.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.437-442
• /
• 2017

Previously, studies on compensation material to increase the signal intensity have been conducted which does not affect the reading of images. However, the compensation material has a concern on patient infection as it is attached directly on the skin. Therefore, in this study, we tested an indirect attachment of the compensation material as an alternative method of the direct attachment. The silicon compensation material was fabricated in the form of a cylindrical bar and attached to each element of the 8 channel head coil. Then the signal intensities of the water phantom pre and post application of the silicon were measured. T1 and T2-weighted images were acquired using an 8-channel head coil and a 3.0T superconducting MRI. Signal intensities were measured by using an image measuring program. Paired t-test was used to verify if there were significant differences. The signal intensity before application of the silicon was significantly increased by 3.39% and 2.62% in T1 and T2 weighted images, respectively. Although the indirect attachment method had a limitation to completely replace the existing method, it was considered to be useful in patients with infectious diseases such as diabetic complications since it had a meaningful improvement in signal intensity based on the filling factor increase.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.335-343
• /
• 2024

Real-time target signal processing techniques for FMCW LiDAR are described in this paper. FMCW LiDAR is gaining attention as the next-generation LiDAR for self-driving cars because of its detection robustness even in adverse environmental conditions such as rain, snow and fog etc. in addition to its long range measurement capability. The hardware architecture which is required for high-speed data acquisition, data transfer, and parallel signal processing for frequency-domain signal processing is described in this article. Fourier transformation of the acquired time-domain signal is implemented on FPGA in real time. The paper also details the C-FAR algorithm for ensuring robust target detection from the transformed target spectrum. This paper elaborates on enhancing frequency measurement resolution from the target spectrum and converting them into range and velocity data. The 3D image was generated and displayed using the 2D scanner position and target distance data. Real-time target signal processing and high-resolution image acquisition capability of FMCW LiDAR by using the proposed parallel signal processing algorithms based on FPGA architecture are verified in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4704-4710
• /
• 2015

The purpose of this study is to obtain a useful diagnostic image by increasing the signal strength of the peripheral artery, was to use a T1 shortening effect of gadolinium contrast agents to improve the disadvantages of the phase image. From october to december 2014 thirty patients were underwent the MRI scanning, except for heart disease. Research method was evaluated comparing the image after gadolinium contrast MR image acquisition step before evaluating the difference between the signal intensity for T1 shortening effect. In frontal lobe 19.45%, temporal lobe 23.09%, occipital lobe 25.45%, parietal lobe 18.82%, cerebellum 20.93% after peripheral arterial signal strength results of gadolinium contrast agent injection was increased significantly after injection of gadolinium both statistically significant. After injecting a contrast agent gadolinium in SWI by increasing the signal strength of the T1 shortening effect can be obtained when using the phase image to give a useful image in diagnosis and treatment.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.538-544
• /
• 2000

A phased array ultrasonic nondestructive inspection system is being developed to obtain images of the interior of steel structures by modifying a medical ultrasound imaging system. The medical system consists of 64 individual transceiver channels that can drive 128 array elements. Several modifications of the system were required mainly due to the change of sound speed. It was necessary to fabricate array transducers for steel structure and to obtain A-scan signal that is necessary for the nondestructive testing. Boundary diffraction wave model was used for the prediction of radiation beam field from array transducers, which provided guidelines to design array transducers. And a RF data acquisition board was fabricated for the A-scan signal acquisition along a selected un line within an image. For the proper beam forming in the transmission and reception for steel structure, delay time was controlled. To demonstrate the performance of the developed system and fabricated transducers, images of artificial specimens and A-scan signals for selected scan lines were obtained in a real time fashion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1024-1031
• /
• 2015

Compressive sensing is a new data acquisition method enabling the reconstruction of sparse or compressible signals from a smaller number of measurements than Nyquist rate, as long as the signal is sparse and the measurement is incoherent. In this paper, we consider a simple hypothesis testing in target detection and estimation problems using compressive sensing, where the performance depends on the sparsity level of the signals being detected. We provide theoretical analysis results along with some experiment results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.612-615
• /
• 2006

본 논문에서는 Late 암으로부터 측정된 상관 값을 보정하여 상관함수의 비대칭을 완화시키고 다중경로 신호 오차를 제거하는 새로운 상관기 설계법을 제안하였다. 다중경로 오차에 의한 신호 추적 오차는 상관함수의 Early-Late 간 비대칭과 관련이 있으므로, 다중상관기 구조를 이용하여 상관함수의 Early-Late간 상관값 차를 측정하면 상관함수의 비대칭 정도를 추정할 수 있다. 상관값 차를 이용하여 추정한 상관함수 비대칭을 감소시키면 다중경로 신호에 의한 코드 추적 오차를 줄일 수 있다. 제안한 상관기는 4개의 암과 보정치 생성 블록으로 구성된다. 제안한 상관기의 다중경로 오차 제거 성능은 시뮬레이션을 이용하여 확인하였다. 여러 가지 지연시간 및 신호 진폭을 가지는 다중경로 신호에 대하여 일반 수신기와의 위상 추적 오차를 비교하여 성능을 평가하였다. 시뮬레이션 결과에서 제안한 상관기는 우수한 다중경로 오차 제거 성능을 가지며 일반상관기와 유사한 평균 신호 획득시간을 가짐을 알 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4021-4030
• /
• 2015

Pulse wave is the physiological responses through the autonomic nervous system such as ECG. It is relatively convenient because it can measure the signal just by applying a sensor on a finger. So, it can be usefully employed in the field of U-Healthcare. The objects of this study are acquiring the PPG (Photoplethysmography) one of the way of measuring the pulse waves in non-invasive way using the CMOS image sensor on a smartphone camera, developing the portable system judging stressful or not, and confirming the applicability in the field of u-Healthcare. PPG was acquired by using image data from smartphone camera without separate sensors and analyzed. Also, with that image signal data, HRV (Heart Rate Variability) and stress index were offered users by just using smartphone without separate host equipment. In addition, the reliability and accuracy of acquired data were improved by developing additional hardware device. From these experiments, we can confirm that measuring heart rate through the PPG, and the stress index for analysis the stress degree using the image of a smartphone camera are possible. In this study, we used a smartphone camera, not commercialized product or standardized sensor, so it has low resolution than those of using commercialized external sensor. However, despite this disadvantage, it can be usefully employed as the u-Healthcare device because it can obtain the promising data by developing additional external device for improvement reliability of result and optimization algorithm.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.28-36
• /
• 1998

In the CDMA mobile communication system with asynchronous mode among base stations, the initial PN code acquisition method using a matched filter can be considered for the rapid PN code synchronization acquisition in the handoff region. In the model of the noncoherent QPSK/DS-SS under the Rayleigh fading channel, the mean acquisttion time of the matched filter is analyzed to have a shortened time in proportion to the length of matched filter to be compared with the serial correlation method. In this paper to improve the HW complexity of the conventional matched device which enables the repeated correlation process, is designed and its function is verified through the FPGAsimulation using Altera MaxPlus Ⅱ.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1167-1173
• /
• 2005

In this paper, the use of an antenna array is considered for code timing acquisition of DS-CDMA signals. The probabilities of acquisition are evaluated by applying multiple narrow fixed-beams to the conventional MUSIC acquisition approach in the multiuser environment on the time-varying Rayleigh fading channel. Each fixed-beam for spatial filtering is dedicated to an individual angular sector that is formed by dividing the entire angular domain by the number of antenna elements. The fixed-beams with a capability of interference suppression provide the additional degrees of freedom,. Hence, the multibeam-based MUSIC estimator can be used to synchronize to more users than the conventional MUSIC algorithm for one antenna. The multibeam-based subspace method is evaluated to significantly improve the performance of a single antenna based MUSIC technique in multiuser scenarios.